Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- CASE Ingredients Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Materials Features
- Benefits
- Resistant to water extraction
- Excellent heat stability characteristics
- Low volatility (Carbon Method)
- High efficiency
- Viscosity stability
- Performance Characteristics
Santicizer® Platinum G-2000 offers greater efficiency compared to General Purpose Plasticizers
Santicizer® Platinum G-2000 offers exceptional viscosity stability versus the DOTP General-Purpose plasticizer tested.
Viscosity starts lower and stays lower over 7 days’ time
Santicizer® Platinum G-2000 offers superior water extraction results versus the competition. The percent water absorbed and plasticizer lost is the lowest compared to the DOTP.
Santicizer® Platinum G-2000 Volatility (Carbon Method) shows the product to be superior to the DOTP tested. Tests were performed at 1 and 6 days and % plasticizer loss was recorded.
Santicizer® Platinum G-2000 Heat Stability shows the product to be superior to the DOTP tested.
- Features
Biobased, General Purpose
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Uses
It can be used in techniques such as extrusion, calendaring, injection molding, rotational molding, and spread coating. It can be used in rubbers, epoxy resins, paints and coatings, as well as many other polymers.
Santicizer® Platinum G-2000 is an efficient bio-based primary plasticizer that offers excellent heat stability, enhanced process ability, and lower volatility than your traditional General-Purpose Plasticizers. It can be used in techniques such as extrusion, calendaring, injection molding, rotational molding, and spread coating. It can be used in rubbers, epoxy resins, paints and coatings, as well as many other polymers.
Properties
- Physical Form
- Appearance
- Clear Liquid
- Typical Properties
Value Units Test Method / Conditions Acidity max. 1.0 meq/g Moisture Content max. 0.3 % KF Color max. 4 Gardner Viscosity B-C Gardner Specific Gravity (at 25°C) 0.925 - 0.985 - - Assay Content min. 98.5 % Oxirane Content min. 5 % - Valtris Santicizer® Platinum G-2000 vs. DOTP
Santicizer® Platinum G-2000 is an efficient bio-based primary plasticizer that offers excellent heat stability, enhanced process ability, and lower volatility than your traditional GeneralPurpose Plasticizers. It has 85% renewable carbon content, making it a green product. It can be used in techniques such as extrusion, calendaring, injection molding, rotational molding, and spread coating. It can be used in many polymers, including rubbers, epoxy resins, and paints and coatings.
In flooring industries, the Santicizer® Platinum G-2000 is a great replacement for DOTP in both Carpet Backing and Cove formulations.
Property DOTP Platinum G-2000 Volatility (neat) EPA Method 24 0.70% 0.50% Viscosity (neat), 20 1/s @ 25C
% Renewable Carbon Content380
0259
85%% 2-ethylhexyl alcohol content (neat) 68% 7.5% Cost Savings/Elimination of raw material (ESO)
Decrease in stabilizer loading---
---~ 4% savings
Up to 15% savingsCost Savings:
- When formulating with Santicizer® Platinum G-2000 to replace DOTP as a GeneralPurpose plasticizer, one can use lower amounts of Santicizer Platinum G-2000 and also eliminates any use of ESO (Epoxidized Soybean Oil).
- Since Santicizer® Platinum G-2000 has excellent heat stability properties, there is a potential to lower your level of heat stabilizer quite significantly.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Storage & Handling
- Storage Conditions
- If stored below 90°F, Santicizer® Platinum G-2000 may crystallize over time.
- In this event, a homogenous liquid can be restored by heating to 120°F.
- Ideally, Santicizer® Platinum G-2000 should be stored at temperatures between 100-120°F.
- Storage above 180°F is not recommended.