Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Rheological Properties
Value | Units | Test Method / Conditions | |
Tensile Strain at Break (50mm/min) | 1.8 | % | ISO 527 |
Tensile Stress at Break (50mm/min) | 39 | MPa | ISO 527 |
Flexural Strength (2mm/min) | 69 | MPa | ISO 178 |
Rockwell Hardness (L/M) | M80 | — | ISO 2039/2 |
Tensile Modulus (1mm/min) | 3250 | MPa | ISO 527 |
Izod Impact Strength (Notched, 23°C, 4mm) | 1.7 | kJ/m² | ISO 180/1A |
Izod Impact Strength (Notched, -30°C, 4mm) | 1.5 | kJ/m² | ISO 180/1A |
Value | Units | Test Method / Conditions | |
Water Absorption (24h, 23°C) | max. 0.1 | % | ISO 62 |
Density | 1.05 | g/cm³ | ISO 1183 |
Bulk Density | 0.65 | g/cm³ | ISO 60 |
Value | Units | Test Method / Conditions | |
Coefficient of Linear Thermal Expansion | 7×10⁻⁵ | /°C | ASTM D 696 |
Thermal Conductivity | 0.17 | W/(K·m) | ISO 8302 |
Moulding Shrinkage | 0.3 - 0.6 | % | ISO 294/4 |
Deflection Temperature Under Load (Annealed, 1.82MPa, 120°C/h) | 84 | °C | ISO 75 A |
Vicat Softening Temperature (50N, 50°C/h) | 88 | °C | ISO 306/B |
Vicat Softening Temperature (10N, 50°C/h) | 92 | °C | ISO 306/A |
Value | Units | Test Method / Conditions | |
Dielectric Constant (Relative Permittivity, 50Hz) | 2.5 | — | IEC 60250 |
Dissipation Factor (50Hz) | 0 | — | IEC 60250 |
Comparative Tracking Index (CTI, Sol. A) | 375 | — | IEC 60112 |
Surface Resistivity | min. 1.5×10¹⁵ | ohm | IEC 60093 |
Volume Resistivity | min. 7×10¹⁵ | ohm·cm | IEC 60093 |
Dielectric Strength | 70 | kV/mm | IEC 60243 |
Value | Units | Test Method / Conditions | |
Flame Behaviour (1.5mm) | HB | cl. | UL 94 |
Glow Wire Test (GWT, 1.6mm) | 650 | °C | IEC 60695-2-10 |
Value | Units | Test Method / Conditions | |
Melt Flow Rate (200°C, 5kg) | 10 | g/10' | ISO 1133 |
Packaging & Availability
- Country Availability
- Regional Availability