Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Rheological Properties
Value | Units | Test Method / Conditions | |
Tensile Strain at Break (50mm/min) | 70 | % | ISO 527 |
Tensile Stress at Break (50mm/min) | 28 | MPa | ISO 527 |
Tensile Stress at Yield (50mm/min) | 21 | MPa | ISO 527 |
Flexural Strength (2mm/min) | 38 | MPa | ISO 178 |
Rockwell Hardness (L/M) | L65 | — | ISO 2039/2 |
Tensile Modulus (1mm/min) | 1900 | MPa | ISO 527 |
Izod Impact Strength (Notched, -30°C, 4mm) | 6.5 | kJ/m² | ISO 180/1A |
Izod Impact Strength (Notched, 23°C, 4mm) | 10 | kJ/m² | ISO 180/1A |
Izod Impact Strength (Notched, 23°C, 3.2mm) | 125 | J/m | ISO 180/4A |
Value | Units | Test Method / Conditions | |
Water Absorption (24h, 23°C) | max. 0.1 | % | ISO 62 |
Density | 1.04 | g/cm³ | ISO 1183 |
Bulk Density | 0.65 | g/cm³ | ISO 60 |
Value | Units | Test Method / Conditions | |
Coefficient of Linear Thermal Expansion | 9×10⁻⁵ | /°C | ASTM D 696 |
Thermal Conductivity | 0.17 | W/(K·m) | ISO 8302 |
Moulding Shrinkage | 0.4 - 0.7 | % | ISO 294/4 |
Deflection Temperature Under Load (Annealed, 1.82MPa, 120°C/h) | 85 | °C | ISO 75 A |
Vicat Softening Temperature (50N, 50°C/h) | 91 | °C | ISO 306/B |
Vicat Softening Temperature (10N, 50°C/h) | 99 | °C | ISO 306/A |
Value | Units | Test Method / Conditions | |
Dielectric Constant (Relative Permittivity, 50Hz) | 2.5 | — | IEC 60250 |
Dissipation Factor (50Hz) | 0 | — | IEC 60250 |
Comparative Tracking Index (CTI, Sol. A) | 500 | — | IEC 60112 |
Surface Resistivity | min. 1.5×10¹⁵ | ohm | IEC 60093 |
Volume Resistivity | min. 7×10¹⁵ | ohm·cm | IEC 60093 |
Dielectric Strength | 65 | kV/mm | IEC 60243 |
Value | Units | Test Method / Conditions | |
Flame Behaviour (1.5mm) | HB | cl. | UL 94 |
Glow Wire Test (GWT, 1.6mm) | 650 | °C | IEC 60695-2-10 |
Value | Units | Test Method / Conditions | |
Melt Flow Rate (200°C, 5kg) | 4 | g/10' | ISO 1133 |
Packaging & Availability
- Country Availability
- Regional Availability