Products

SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.

ELASTOSIL® RT 745 S" A/B" is a pourable, two-part silicone rubber that can be thermally cured. It is an addition-curing type, making it suitable for various applications. Some notable industries where it finds use are automotive, electronics, and measurement and control. Specifically, it is employed in potting and encapsulation processes, ensuring the protection and stability of sensitive components and systems.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber that offers excellent processing properties. The resulting vulcanizates exhibit exceptional mechanical and electrical properties. This product is specifically designed for cold-shrink applications and provides excellent dielectric properties. It is highly suitable for outdoor applications, offering UV and weathering resistance as well as excellent hydrophobic properties.

SEMICOSIL® 2M2M is a high-purity dimethoxydimethylsilane with low levels of metal, chloride, and methanol content. It was developed specifically for the semiconductor industry, serving as a precursor for low-dielectric-constant interlayer dielectrics. This product is commonly used in chemical vapor deposition (CVD) and spin-on dielectric (SOD) applications.

ELASTOSIL® LR 3003/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® RT 771 is a self-leveling, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 771 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 180°C (356°F) without damage.

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

POWERSIL® 466 A/B is a ready-to-use, two-component system of liquid silicone rubber. It exhibits medium conductivity and offers stable electrical properties along with good mechanical properties. The material is characterized by high elongation at break and low tension set, ensuring flexibility and durability in applications.

ELASTOSIL® SOLAR 2205 is a pourable addition-curing RTV-2 silicone rubber suitable for coating, lamination, and encapsulation purposes. The product cures at room temperature and under heat to yield a soft elastomer. Cured ELASTOSIL® SOLAR 2205 offers excellent long-term stability against weathering, moisture, and UV light. The soft silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

ELASTOSIL® 4100 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as sanitary applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

ELASTOSIL® LR 3675/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

ELASTOSIL® RT 705 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is primarily used for potting and coating applications but can also be used as a surface adhesive when applied in a thin layer, such as by silk-screen printing. Once cured, ELASTOSIL® RT 705 exhibits excellent adhesion to various substrates and demonstrates long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® LR 3072/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

LUMISIL® LR 7601/80 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates obtained from this material are known for their exceptionally high optical transparency, as well as their outstanding mechanical and electrical properties.

POWERSIL® 740 Light Gray A/B is a paste-like, two-component compound with short curing times. When cured, it forms vulcanizates that exhibit remarkable properties such as high tracking and erosion resistance. The material also demonstrates good mechanical properties, including high tear strength, and exhibits excellent dielectric behavior.

WACKER® Primer G 790 Toluene Free is a solution of reactive siloxanes and silanes in an organic solvent. It is specifically formulated to be free of toluene and other aromatic solvents. The primer can be applied directly to the substrate or diluted if desired. As the solvent evaporates and when exposed to ambient humidity, the primer forms a rigid film that firmly adheres to the substrate. By applying a silicone rubber onto the primed substrate and subsequently vulcanizing it, a strong bond is achieved between the silicone rubber and the substrate.

ELASTOSIL® 4000 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

WACKER® Silicone Paste P 250 is an opaque paste with a medium consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 250 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.

WACKER® AP 200 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants.

WACKER SilGel® 612 EH A/B is a two-part, pourable, addition-curing RTV-2 silicone rubber. It is a modified version of WACKER SilGel® 612, offering increased hardness and reactivity. With a 1:1 mixing ratio, this product ensures a convenient and precise blending process. It exhibits rapid curing properties and retains a low hardness.

POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.

SEMICOSIL® HMDSO-EL is a high-purity hexamethyldisiloxane (HMDSO) known for its exceptional purity, low metal content, and low chloride content. This product has been specifically developed to cater to the needs of the semiconductor industry. It finds applications in various processes such as chemical vapor deposition (CVD) and spin-on dielectrics (SOD).

ELASTOSIL® E91 Transparent is a self-leveling silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Curing can be accelerated in a steam oven. It is a multipurpose glue for textile coatings, e.g. antislip coatings.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.

WACKER® AP 500 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants. For practical purposes, the useful temperature range of WACKER® AP 500 is between -35 °C and +200 °C.

ELASTOSIL® RT 646 A/B is a castable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material with resistance against casting resins, making it suitable for various applications such as encapsulation of electronic components, all-round potting compound, and mold making in reproduction molding.

ELASTOSIL® LR 3003/20 TR A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

SEMICOSIL® 924 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. It is a ready-to-use product, requiring no additional mixing. SEMICOSIL® 924 exhibits thixotropic flow, allowing for easy application. Upon vulcanization, it forms a soft gel. This silicone rubber has low levels of volatiles and uncured polymers, contributing to its high purity. It also boasts a low ion content. SEMICOSIL® 924 maintains almost constant properties within a broad temperature range, from -50 °C to +180 °C.