Products

WACKER® Catalyst EM 470 is an emulsion formulated with a highly reactive platinum catalyst. It is specifically designed for incorporation into release coating formulations used in the production of release papers and films. This catalyst demonstrates remarkable reactivity and excellent wetting properties, providing superior anchorage and high shear stability throughout the application process.

Wacker Chemie Crosslinker BO 30 is a mixture consisting of various ketoximosilanes. It is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms methylethylketoxime. This crosslinker is primarily used as a special raw material for silicone compounding applications.

WACKER® Crosslinker V 24 is a solvent-free hydrogenpolysiloxane that contains reactive Si-H groups. It offers a good cure, ensuring the effective curing of coatings. This crosslinker provides low release properties, making it suitable for applications where minimal release is desired. It also exhibits good release stability, maintaining its performance over time. Additionally, WACKER® Crosslinker V 24 demonstrates excellent anchorage to paper and film substrates.

WACKER® Crosslinker V 15 is an emulsified hydrogenpolysiloxane that contains reactive Si-H groups. It serves as a component in emulsion-release coating systems for various substrates. This crosslinker offers fast curing properties, making it ideal for efficient processing. It is easy to mix and meter, ensuring convenient use. Additionally, it provides good release stability.

Wacker Chemie Crosslinker BO 32 is composed of tetraoximinosilane in toluene. It is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms methylethylketoxime. This crosslinker is primarily used as a special raw material for compounding silicone sealants.

Wacker Chemie Crosslinker BO 38 is a colorless to yellow liquid that consists of tris(ethylmethylketoximato)methylsilane. It is not miscible with water and undergoes decomposition in the presence of water or moisture, resulting in the formation of methylethylketoxime. This particular crosslinker is utilized as a special raw material for compounding silicone sealants.

WACKER® Crosslinker ALX is a mixture of alkoxy- and aminosilanes. It is a colorless to slightly yellow liquid that can appear clear or slightly turbid. It is partially miscible with water but decomposes when exposed to water or moisture, resulting in the formation of alcohols and a silicone resin. WACKER® Crosslinker ALX serves as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers.

WACKER® Crosslinker ME 60 is a mixture of alkoxysilane and aminofunctional siloxane. It appears as a colorless to yellow liquid, clear to slightly turbid, and is partially miscible with water. When exposed to water or moisture, it decomposes and forms methanol and a silicone resin. WACKER® Crosslinker ME 60 is utilized as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers.

WACKER® Crosslinker V 88 is a solvent-free hydrogenpolysiloxane that contains reactive Si-H groups. This crosslinker is renowned for its fast curing properties, good release stability, and excellent anchorage to various substrates. It is specifically used for curing crosslinking solvent-based and solvent-free DEHESIVE®-systems. It offers fast curing, good release stability, and excellent anchorage on a wide variety of substrates.

WACKER® Crosslinker ME 63 is a blend of alkoxysilane and aminofunctional siloxane, presenting as a colorless to yellow liquid that can be clear or slightly turbid. It demonstrates partial miscibility with water, and upon contact with water or moisture, it undergoes decomposition, resulting in the formation of methanol and a silicone resin. WACKER® Crosslinker ME 63 finds application as a crucial component in the manufacturing of alkoxy-cured RTV-1 silicone rubbers.

WACKER® Crosslinker V 90 is a solvent-free hydrogenpolysiloxane containing reactive Si-H groups. It is known for its fast curing properties, good release stability, and excellent anchorage to a wide variety of substrates. The fast-curing properties of WACKER® Crosslinker V 90 also enable the use of a low platinum concentration.

WACKER® Crosslinker V 72 US is an emulsified hydrogenpolysiloxane that contains reactive Si-H groups. This product is specifically designed for addition-curing coating applications in the production of release, baking, and hygiene papers. It offers extremely fast curing, significantly low platinum consumption, and facilitates easy mixing and metering.

WACKER® Crosslinker V 58 is a hydrogenpolysiloxane that contains reactive Si-H groups. It offers excellent cure properties, allowing for low platinum concentration and low temperature cure. This crosslinker provides good release stability, ensuring consistent performance over time. It also demonstrates good anchorage, which may vary depending on the substrates used.

WACKER® Crosslinker ES 23 is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms acetic acid. WACKER® Crosslinker ES 23 is utilized as a raw material for acetoxy crosslinking RTV-1 silicone rubbers.

SILRES® HP 2020 is a low-viscosity, reactive aminofunctional methyl phenyl silicone resin. The product is typically used as a curing agent or crosslinker for cycloaliphatic epoxy resins in 2-pack high-solids coatings. It significantly improves the weathering resistance of the coating compared to organic amine curing agents. Such 2-pack epoxypolysiloxane coatings are an isocyanate-free alternative to 2-pack polyurethanes as weathering-resistant topcoats.

WACKER® Crosslinker NM 25 is a clear to light yellow liquid crosslinker that contains no MEKO (methyl ethyl ketoxime). This product undergoes rapid hydrolysis upon exposure to moisture. It is commonly used as the primary crosslinker in oxime silicone sealants with no MEKO content.

WACKER® Elastomer 6 N is a clear, colorless polydimethylsiloxane fluid that features silanole groups in the α,ω-position. This functionalization of the polydimethylsiloxane chains results in products with a functionality of 2. The silanole groups in WACKER® Elastomer 6 N enable it to undergo condensation reactions with itself or with functional silanes. Additionally, these silicone fluids can react with fluids containing Si-H groups, leading to the evolution of hydrogen. OH-terminated fluids are available in a wide range of viscosities to suit different application requirements.

WACKER® L 655 is a crosslinking aminoalkyl functional polydimethylsiloxane. Unlike conventional polydimethylsiloxanes in the WACKER® AK series, WACKER® L 655 demonstrates exceptional affinity to various surfaces. When exposed to atmospheric humidity or reactive polish actives like acid waxes, WACKER® L 655 undergoes crosslinking, resulting in the formation of a stable and insoluble polymer film. This film exhibits outstanding substrate affinity and resistance to detergents.

WACKER® eco Crosslinker V 90 is a solvent-free hydrogenpolysiloxane that contains reactive Si-H groups. This product is formulated using renewable raw materials in accordance with the "Standard REDcert²." It offers fast curing, good release stability, and excellent anchorage on a wide variety of substrates. The fast-curing properties of WACKER® eco Crosslinker V 90 allow for a low platinum concentration requirement.

WACKER® Crosslinker V 68 is an emulsified hydrogenpolysiloxane that contains reactive Si-H groups. This product is specifically designed as a part of an emulsion-release coating system for a variety of substrates. Its superior curing properties enable low platinum formulations, resulting in cost efficiency. The formulation of this crosslinker allows for easy mixing and metering, facilitating the manufacturing process. Additionally, it provides good release stability.

WACKER® Crosslinker V 72 is an emulsified hydrogenpolysiloxane containing reactive Si-H groups. It is designed for use in emulsion-release coating systems on a variety of substrates. This product offers good release stability, a long bath life, and excellent wetting properties.

Wacker Chemie Crosslinker BO 35 is a colorless to yellow liquid composed of tris(ethylmethylketoximato)vinylsilane. It is not miscible with water and decomposes when exposed to water or moisture, forming methylethylketoxime. This crosslinker is specifically used as a raw material in the production of oxime-cured RTV-1-silicone rubber compounds.

SILRES® HP 2000 is a reactive aminofunctional methyl phenyl silicone resin supplied as an approximately 90 wt.% solution in xylene. The product is typically used as a curing agent or crosslinker for cycloaliphatic epoxy resins in 2-pack high-solids coatings. It significantly improves the weathering resistance of the coating compared to organic amine curing agents. Such 2-pack epoxypolysiloxane coatings are an isocyanate-free alternative to 2K-polyurethanes as weathering-resistant topcoats.