Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Wacker Chemie AG
All Wacker Chemie AG
Search products
Matching Product Categories
Elastomers
Ready-to-Use Products
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
218 Products found on Wacker Chemie AG
Most Viewed
SDS
With SDS
TDS
With TDS
SILPURAN® 2400 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Prosthetics
Features:
Good Damping, Low Skin Sensitivity, Low Hardness, Room Temperature Vulcanizing, Low Viscosity, Biocompatible, Translucent, Pourable, Fast Curing, Excellent Flowability
Tear Strength:
3.0 - 3.0 kN/m
SILPURAN® 2400 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer of low hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2400 A/B can be used for flexible molding applications in prosthetics. The components A and B of SILPURAN® 2400 A/B are mixed homogeneously in a ratio of 1:1 and vulcanize rapidly at temperatures over 100°C.
ELASTOSIL® R 865/60 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Automotive Components
Features:
Pigmentable, Good Processability, High Consistency, Excellent Rebound, Low Compression Set, High Resilience, Food Contact Acceptable
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® R 865/60 S provides a wide range of functional advantages. This material guarantees superior rebound resilience and minimal compression set. It can be easily pigmented using ELASTOSIL® PT Pigment Pastes and exhibits favorable processing characteristics. The various grades available, including ELASTOSIL® R 865/40 to ELASTOSIL® R 865/70, can be blended in any proportion to achieve intermediate hardness levels.
ELASTOSIL® M 4642 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Medium Hardness, Good Flow, Low Shrinkage, Pourable, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4642 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. It offers a fast and non-shrink cure at room temperature, which can be significantly accelerated with the application of heat. It is used in making shrink-free molds with excellent reproduction accuracy.
ELASTOSIL® P 26028 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Anti-Decubitus Cushions, Medical Devices
Features:
Low Viscosity, Good Damping, Good Adhesion
ELASTOSIL® P 26028 A/B is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature. It provides a very fast and non-shrink cure at room temperature, allowing for efficient and reliable mold-making. The main application of ELASTOSIL® P 26028 A/B is in the production of shrink-free molds with excellent reproduction accuracy.
ELASTOSIL® R 756/70 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Household Goods, Automotive Components
Features:
High Consistency, Tear Resistance, Low Compression Set, High Temperature Application, Food Contact Acceptable, High Elasticity, Hot Air Resistant, Heat Resistance
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® R 756/70 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates of this product show good tear resistance, a low compression set, and are highly elastic.
ELASTOSIL® R 510/70 S
Polymer Name:
Silicone Elastomer
End Uses:
Cables, Ignition Cables, Wire Jacketing, Battery Cable, Wires, General Purpose, Cable Jacketing
Features:
Heat Stabilized, Heat Resistance, General Purpose, High Consistency
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R 510/70 S is a peroxide-crosslinking, high-consistency silicone rubber (HCR) that is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.
ELASTOSIL® R 805/75 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
Features:
Heat Stabilized, Good Mechanical Properties, Excellent mineral Oil Resistance, High Consistency, Oil Resistant, Low Compression Set
Tear Strength:
17.0 - 17.0 kN/m
ELASTOSIL® R 805/75 OH is a high-consistency silicone rubber (HCR) that produces vulcanizates with excellent resistance to engine oils and aggressive mineral oils, even at high temperatures. It is an oil-resistant, peroxide-curing silicone rubber. The vulcanizates exhibit good mechanical properties and a low compression set.
ELASTOSIL® R 416/70 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Calendering, Extrusion
End Uses:
Turbo Charger Hose, Tubes, Exhaust Duct Systems, Turbocharger Hoses, Hoses, Profiles
Features:
Heat Stabilized, Cost Effective, Non Stick, Dimensional Stability, High Consistency, Good Green Strength
Tear Strength:
32.0 - 32.0 kN/m
ELASTOSIL® R 416/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.
ELASTOSIL® R 500/70 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Cables, Appliance Wire Insulation, General Purpose, Automotive Electronics
Features:
Heat Stabilized, General Purpose, High Consistency
Tear Strength:
26.0 - 26.0 kN/m
ELASTOSIL® R 500/70 OH is a peroxide-cured high-consistency silicone rubber (HCR) for general-purpose applications. This product can be used within a temperature range of -55 °C to +210 °C. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.
SILMIX® M40 Gray
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 Gray is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® M40 Gray is designed for fabricating molded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® R 750/40 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Tubes, Exhaust Duct Systems, Profiles
Features:
Very Good Heat Resistance, High Temperature Application, High Temperature Resistance, Heat Resistance, Oxidation Resistant, High Consistency
Tear Strength:
26.0 - 26.0 kN/m
ELASTOSIL® R 750/40 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.
ELASTOSIL® R Plus 4070/60 MH
Polymer Name:
Silicone Elastomer
End Uses:
Automotive Components
Features:
High Consistency, Heat Stabilized
Tear Strength:
39.0 - 39.0 kN/m
ELASTOSIL® R Plus 4070/60 MH is a self-adhesive grade that provides strong adhesion to various plastic substrates (e.g. PA, PBT) and metals, without causing tack formation to the mold. It is an addition-curing, one-component high consistency silicone rubber designed for the manufacturing of molded articles. This product is particularly suitable for applications requiring vibration damping properties.
SILMIX® E40 Red
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
23.625 - 23.625 kN/m
SILMIX® E40 Red is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® E40 Red is specifically designed for fabricating extruded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® R 771/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Compression Molding, Calendering
End Uses:
Cup Holders, Bellows
Features:
High Consistency, High LOI (Loss On Ignition), Flame Retardant
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® R 771/60 OH is a peroxide-curing HCR silicone for the manufacture of flame retardant products, particularly designed for railway applications. The product has been tested according to EN 45545-2 requirement sets R1, R7 (HL2). The color of the rubber base is white.
SILMIX® M40 White
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M40 White is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® P 7600 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.5 - 1.5 kN/m
ELASTOSIL® P 7600 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
ELASTOSIL® M 4125 F A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Room Temperature Vulcanizing, Low Shrinkage, Food Contact Acceptable, Low Viscosity, Pourable, Good Mechanical Properties, Long Potlife, Ease of Handling, Fast Curing, Good Shrinkage Resistance, Excellent Flowability, Medium Hardness
ELASTOSIL® M 4125 F A/B is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature. It provides a very fast and non-shrink cure at room temperature, allowing for efficient and reliable mold-making. The main application of ELASTOSIL® M 4125 F A/B is in the production of shrink-free molds with excellent reproduction accuracy.
ELASTOSIL® RT 646 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
2K (2 component) Sealant, Potting Compound, Encapsulant
Cure Method:
Heat Cure, Air Dry, Chemical Cure
ELASTOSIL® RT 646 A/B is a castable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material with resistance against casting resins, making it suitable for various applications such as encapsulation of electronic components, all-round potting compound, and mold making in reproduction molding.
ELASTOSIL® R 420/40 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Profiles, Bathroom Accessories, Tubes, Tubing, Exhaust Duct Systems, Gaskets, Vibration Dampers
Features:
High Flexibility, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose, Tear Resistance, Good Mechanical Properties
Tear Strength:
34.0 - 34.0 kN/m
ELASTOSIL® R 420/40 S is a high-consistency silicone rubber (HCR) that features outstanding tear resistance and high transparency. The peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is known for its good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and demonstrate good processing characteristics.
ELASTOSIL® R Plus 4303/80
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Fast Curing, High Consistency
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® R Plus 4303/80 is a two-component high-consistency silicone rubber designed for the production of extruded articles, specifically for applications involving contact with potable water. The cured articles possess excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber utilizes addition cure, resulting in a significantly accelerated vulcanization reaction compared to peroxide-based materials.
ELASTOSIL® R Plus 4303/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Fast Curing, High Consistency
Tear Strength:
37.0 - 37.0 kN/m
ELASTOSIL® R Plus 4303/70 is a two-component high-consistency silicone rubber specifically formulated for the production of extruded articles, particularly those intended for contact with potable water. The cured articles exhibit excellent transparency and showcase good to very good mechanical properties. This silicone rubber cures rapidly through addition cure, resulting in a significantly faster vulcanization reaction compared to peroxide-based materials.
POWERSIL® 3100 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Arresters Housings, Bushings, Power Transformers, Insulators, Electrical Components, Arresters
Features:
High Impact Resistance, Long Term Protection, Light Weight, Electrically Insulating, Arc Resistant, Tracking Resistant, Good Mechanical Properties, Shock Resistant, Excellent Dielectric Properties, Excellent Hydrophobic Properties, High Consistency, Good Erosion Resistance
Tear Strength:
20.0 - 20.0 kN/m
POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.
SILMIX® M70 Red
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
29.75 - 29.75 kN/m
SILMIX® M70 Red is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are known for their good flexibility and mechanical properties. SILMIX® M70 Red is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® R Plus 5305/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Ignition Cables, Battery Cable
Features:
Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Fast Curing, High Consistency, Platinum Catalyzed
Tear Strength:
42.0 - 42.0 kN/m
ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.
ELASTOSIL® RT 620 A/B
Polymer Name:
Silicone Elastomer
Features:
Translucent, Good Shrinkage Resistance, Good Tear Strength, Low Hardness, Tear Resistance, Good Flow, Low Shrinkage, Low Viscosity, Pourable, Excellent Mechanical Strength, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Soft, High Reactivity, Food Contact Acceptable
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® RT 620 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is compliant with BfR (German Federal Institute for Risk Assessment) and FDA (Food and Drug Administration) regulations, making it suitable for food-contact applications. The material is flowable and has low viscosity, ensuring easy handling.
ELASTOSIL® R Plus 4305/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Cables, Ignition Cables, Wires, Battery Cable, Plugs
Features:
Low Compression Set, Good Mechanical Properties, Fast Curing, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties
Tear Strength:
39.0 - 39.0 kN/m
ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® SUB C 2000 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Marine Applications
Features:
Room Temperature Vulcanizing, Thermally Insulating, Low Temperature Flexibility, Low Viscosity, Translucent, Flexible, Pigmentable, High Durability, Fast Curing, Good Shrinkage Resistance
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® SUB C 2000 A/B is a two-component silicone rubber specifically developed for deep-sea applications. It is a pourable material that undergoes addition curing. This silicone rubber exhibits flexibility at both low temperatures (-40 °C) and high temperatures (+180 °C). It has a low viscosity, making it ideal for the manufacturing of various thermal insulating devices.
ELASTOSIL® R 490/55 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Compression Molding, Extrusion, Injection Molding
End Uses:
Tubing, Automotive Components, Profiles
Features:
Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, Low Temperature Flexibility, Good Mechanical Properties, High Flexibility, High Consistency
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® R 490/55 OH is a phenyl silicone rubber (PMVQ) specifically designed for the production of articles with excellent low-temperature flexibility. Vulcanizates cured with peroxide made from this compound possess a distinctive set of qualities, including good flexibility, high transparency, and favorable mechanical properties. This compound can be easily pigmented using Elastosil® Color Paste PT and exhibits favorable processing characteristics.
SILMIX® M40 Black
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 Black is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M40 Black is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® M 4601 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Low Hardness, Good Flow, Low Shrinkage, Low Viscosity, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4601 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4601 A/B is in making shrink-free molds with excellent reproduction accuracy. This grade is also compliant with FDA and BfR regulations for food contact applications.
ELASTOSIL® P 7676 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Soft, Durable, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, Fast Curing, Breathable, Room Temperature Vulcanizing, Translucent, Good Aesthetics, Low Hardness, Pourable, Heat Resistance, High Durability, Excellent Flowability, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.0 - 1.0 kN/m
ELASTOSIL® P 7676 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
ELASTOSIL® R 401/60 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Profiles, Bathroom Accessories, Battery Cable, Control Cables, Tubes, Tubing, Exhaust Duct Systems, Spark Plug Boots, Ignition Cables, Gaskets, Vibration Dampers, General Purpose
Features:
Good Mechanical Properties, High Flexibility, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® R 401/60 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.
POWERSIL® 352 MH
Polymer Name:
Silicone Elastomer
End Uses:
Cable Accessories, Cables, Wires
Features:
Good Electrical Properties, Tracking Resistant, Good Mechanical Properties, Excellent Dielectric Properties, High Consistency, Arc Resistant, Good Erosion Resistance
Tear Strength:
30.0 - 30.0 kN/m
POWERSIL® 352 MH is a peroxide crosslinking HCR rubber that offers excellent electrical and mechanical properties, making it particularly suitable for outdoor applications in the transmission and distribution (T&D) industry. This product is specifically designed for T&D applications and is well-suited for cable accessory applications due to its exceptional mechanical properties.
ELASTOSIL® M 4370 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Good Shrinkage Resistance, High Hardness, High Rigidity, Good Flow, Very Good Heat Resistance, Low Shrinkage, Low Viscosity, Pourable, Heat Resistance, Good Thermal Stability, Fast Curing, Excellent Flowability, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:
4.0 - 4.0 kN/m
ELASTOSIL® M 4370 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4370 A/B is in creating silicone surfaces for printing rollers and making molds for casting low-melting metal alloys. This grade is compliant with FDA and BfR regulations for food contact applications.
ELASTOSIL® R Plus 4305/40
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Low Compression Set, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Fast Curing, High Consistency
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® R Plus 4305/40 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
SILPURAN® 2420 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Orthotics, Prosthetics
Features:
Translucent, High Hardness, Medium Hardness, Low Skin Sensitivity, Tear Resistance, Low Viscosity, Biocompatible, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing
Tear Strength:
13.0 - 13.0 kN/m
SILPURAN® 2420 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer of medium hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2420 A/B can be used for flexible molding applications in orthopedic technology. Components A and B of SILPURAN® 2420 A/B are mixed homogeneously in a ratio of A:B = 1:1 and vulcanize rapidly at temperatures over 100°C.
Show
36
of 218 results
Go to page
1
2
3
4
5
6
7