Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Wacker Chemie AG
All Wacker Chemie AG
Search products
Matching Product Categories
Elastomers
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
25 Products found on Wacker Chemie AG
Most Viewed
SDS
With SDS
TDS
With TDS
ELASTOSIL® R 402/60 US
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Transfer Molding, Compression Molding
End Uses:
Profiles, Door Profiles, Medical/Healthcare Applications
Features:
High Consistency, Good Green Strength, Shorter Cycle Time, Good Extrusion Properties, High Tensile Strength, Food Contact Acceptable, Excellent Transparency Properties, High Clarity, Good Moldability, Good Mechanical Properties
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® R 402/60 US is a high-consistency silicone rubber (HCR) that is known for its high transparency and good mechanical properties. This product has a high green strength, making it suitable for the production of complex extruded profiles. Its vulcanizing characteristics allow for short cycle times in the manufacturing of rubber moldings through compression, transfer, and injection molding processes. The post-cured vulcanizates of this product are suitable for applications in the health care and food handling industries. ELASTOSIL® R 402/60 US is formulated with ingredients that are suitable for food contact applications, complying with Title 21 "Food and Drugs," Part 177.2600, which regulates rubber articles intended for repeated use. However, it is the responsibility of the user to ensure compliance with this regulation due to its limitations.
ELASTOSIL® R Plus 4001/50 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
39.0 - 39.0 kN/m
ELASTOSIL® R Plus 4001/50 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber demonstrate high transparency and exhibit good to very good mechanical properties. This fast-curing silicone rubber offers excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® R Plus 4001/70 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
38.0 - 38.0 kN/m
ELASTOSIL® R Plus 4001/70 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber exhibit high transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® R Plus 4001/20 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
34.0 - 34.0 kN/m
ELASTOSIL® R Plus 4001/20 MH is a one-component, high-consistency silicone rubber designed for the production of molded articles. It utilizes an addition-cure process, resulting in cured articles that exhibit high transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4001/20 MH is a fast-curing silicone rubber that demonstrates excellent mechanical properties. The addition-cure mechanism ensures a significantly faster vulcanization reaction compared to peroxide curing materials, without the formation of peroxide decomposition products during vulcanization.
ELASTOSIL® AUX Replasticizer 4
Functions:
Plasticizer
Compatible Polymers & Resins:
Silicones
Processing Methods:
Compression Molding
ELASTOSIL® AUX Replasticizer 4 is a ready-to-use silicone rubber additive that helps to replastify heavily crepe-hardened solid silicone rubber compounds. Depending on the degree of crepe-hardening, a dosage of 1 - 3 % is recommended. This product has a paste consistency and can easily be incorporated into ELASTOSIL® R and R Plus compounds.
ELASTOSIL® R Plus 4001/30 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
45.0 - 45.0 kN/m
ELASTOSIL® R Plus 4001/30 MH is a one-component, high-consistency silicone rubber specifically designed for the production of molded articles. It utilizes an addition-cure process, resulting in cured articles that display high transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4001/30 MH is a fast-curing silicone rubber that exhibits excellent mechanical properties.
ELASTOSIL® R 771/70 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Compression Molding, Calendering
End Uses:
Cup Holders, Bellows
Features:
High Consistency, High LOI (Loss On Ignition), Flame Retardant
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® R 771/70 OH is a peroxide-cured high-contrast rubber silicone for the manufacture of flame retardant products, particularly designed for railway applications. The product has been tested according to EN 45545-2 requirement sets R1, R7 (HL2). The color of the rubber base is white.
ELASTOSIL® R 755/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Extrusion, Injection Molding, Compression Molding
End Uses:
Tubing, Profiles, Household Goods
Features:
High Consistency, Steam Resistant
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® R 755/60 OH is a high-consistency silicone rubber grade developed specifically for manufacturing articles with good steam resistance. This product is steam-resistant and is suitable both for extrusion of tubings and profiles and for compression, transfer, and injection molding.
ELASTOSIL® R 701/40 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding
End Uses:
Automotive Components
Features:
Excellent mineral Oil Resistance, High Consistency, Oil Resistant, Excellent Seal Properties, Reversion Resistance, Low Compression Set, Heat Stabilized
Tear Strength:
15.0 - 15.0 kN/m
ELASTOSIL® R 701/40 S is a high-consistency silicone rubber grade for compression-molded products. This compound is recommended for all kinds of seals that come into contact with mineral oils. ELASTOSIL® R 701/40 S is used especially when low compression set is crucial for achieving good seal properties. It may also be used for making high-quality silicone-rubber-covered rollers.
ELASTOSIL® R Plus 4001/90 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
High Consistency, High Hardness, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4001/90 MH is a one-component, high-consistency silicone rubber designed for the production of molded articles. It utilizes an addition-cure process, resulting in cured articles that possess excellent transparency, very high hardness, and favorable mechanical properties. ELASTOSIL® R Plus 4001/90 MH is a fast-curing silicone rubber that exhibits good to very good mechanical properties.
ELASTOSIL® R 401/70 OH US
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Transfer Molding, Compression Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, Translucent, High Clarity, Good Moldability, Good Mechanical Properties, Excellent Mechanical Strength, High Flexibility, High Consistency
Tear Strength:
175.0 - 175.0 kN/m
ELASTOSIL® R 401/70 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.
ELASTOSIL® R Plus 4001/80 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
29.0 - 29.0 kN/m
ELASTOSIL® R Plus 4001/80 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber display high transparency and good to very good mechanical properties. This fast-curing silicone rubber exhibits excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® R 771/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Compression Molding, Calendering
End Uses:
Cup Holders, Bellows
Features:
High Consistency, High LOI (Loss On Ignition), Flame Retardant
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® R 771/60 OH is a peroxide-curing HCR silicone for the manufacture of flame retardant products, particularly designed for railway applications. The product has been tested according to EN 45545-2 requirement sets R1, R7 (HL2). The color of the rubber base is white.
ELASTOSIL® R 752/70 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components
Features:
Low Modulus, Low Resilience, High Consistency, Good Damping
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® R 752/70 OH is a high-consistency silicone rubber (HCR) known for its unique properties. The vulcanizates produced from this product exhibit very low rebound resilience and high damping capability. It is particularly suitable for the manufacturing of low-modulus rubber articles using compression, transfer, or injection molding techniques.
ELASTOSIL® R 427/30
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Extrusion, Injection Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, High Clarity, High Strength, Good Moldability, Good Tear Strength, Tear Resistance, Good Mechanical Properties, High Consistency, Shorter Cycle Time, High Tensile Strength
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.
ELASTOSIL® R Plus 4001/60 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Plugs, Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® R Plus 4001/60 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber display high transparency and exhibit good to very good mechanical properties. This fast-curing silicone rubber offers excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Moreover, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® R 490/55 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Compression Molding, Extrusion, Injection Molding
End Uses:
Tubing, Automotive Components, Profiles
Features:
Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, Low Temperature Flexibility, Good Mechanical Properties, High Flexibility, High Consistency
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® R 490/55 OH is a phenyl silicone rubber (PMVQ) specifically designed for the production of articles with excellent low-temperature flexibility. Vulcanizates cured with peroxide made from this compound possess a distinctive set of qualities, including good flexibility, high transparency, and favorable mechanical properties. This compound can be easily pigmented using Elastosil® Color Paste PT and exhibits favorable processing characteristics.
ELASTOSIL® R 805/75 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
Features:
Heat Stabilized, Good Mechanical Properties, Excellent mineral Oil Resistance, High Consistency, Oil Resistant, Low Compression Set
Tear Strength:
17.0 - 17.0 kN/m
ELASTOSIL® R 805/75 OH is a high-consistency silicone rubber (HCR) that produces vulcanizates with excellent resistance to engine oils and aggressive mineral oils, even at high temperatures. It is an oil-resistant, peroxide-curing silicone rubber. The vulcanizates exhibit good mechanical properties and a low compression set.
ELASTOSIL® R 401/30 OH US
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Transfer Molding, Compression Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, Translucent, High Clarity, Good Moldability, Good Mechanical Properties, Excellent Mechanical Strength, High Flexibility, High Consistency
Tear Strength:
22.75 - 22.75 kN/m
ELASTOSIL® R 401/30 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.
ELASTOSIL® R 752/50 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components
Features:
Low Modulus, Low Resilience, High Consistency, Good Damping
Tear Strength:
32.0 - 32.0 kN/m
ELASTOSIL® R 752/50 OH is a high-consistency silicone rubber (HCR) known for its unique properties. The vulcanizates produced from this product exhibit very low rebound resilience and high damping capability. It is particularly suitable for the manufacturing of low-modulus rubber articles using compression, transfer, or injection molding techniques.
ELASTOSIL® R 427/60
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Extrusion, Injection Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, High Clarity, High Strength, Good Tear Strength, Tear Resistance, Good Mechanical Properties, High Consistency, Shorter Cycle Time, High Tensile Strength
ELASTOSIL® R 427/60 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.
ELASTOSIL® AUX Mould Release Agent 32
Functions:
Release Agent, Mold Release Agent
Compatible Polymers & Resins:
Silicones
Processing Methods:
Compression Molding, Injection Molding
ELASTOSIL® AUX Mould Release Agent 32 is a mold release agent for LSR (liquid silicone rubber) and HTV (high-temperature vulcanizing) injection and compression molding. This product functions as an auxiliary that helps improve the demolding of tools for injection and compression molding.
ELASTOSIL® R 427/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Extrusion, Injection Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, High Clarity, High Strength, Good Moldability, Good Tear Strength, Tear Resistance, Good Mechanical Properties, High Consistency, Shorter Cycle Time, High Tensile Strength
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® R 427/70 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.
ELASTOSIL® R 420/30 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Transfer Molding, Compression Molding
End Uses:
Tubes, Exhaust Duct Systems, Vibration Dampers, Profiles
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, Tear Resistance, Good Mechanical Properties, High Flexibility, High Consistency
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® R 420/30 OH is a high-consistency silicone rubber (HCR) that features outstanding tear resistance and high transparency. The peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is known for its good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and demonstrate good processing characteristics.
ELASTOSIL® R Plus 4001/40 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
38.0 - 38.0 kN/m
ELASTOSIL® R Plus 4001/40 MH is a one-component, high-consistency silicone rubber designed for manufacturing molded articles. This addition-cure rubber yields cured articles with high transparency and excellent mechanical properties. It is known for its fast curing process, which is considerably quicker than that of peroxide-cured materials. Additionally, the vulcanization reaction does not produce any peroxide decomposition by-products.