Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Wacker Chemie AG
All Wacker Chemie AG
Search products
Matching Product Categories
Elastomers
Plastics
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
112 Products found on Wacker Chemie AG
Most Viewed
SDS
With SDS
TDS
With TDS
ELASTOSIL® LR 3003/03 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, General Purpose
Features:
Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, General Purpose, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
3.0 - 3.0 kN/m
ELASTOSIL® LR 3003/03 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
ELASTOSIL® LR 5040/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices, Bathroom Accessories
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 5040/60 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/60 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
ELASTOSIL® LR 3003/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers, General Purpose, Household Goods, Batteries
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, General Purpose, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3003/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
ELASTOSIL® LR 3066/80 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Bathroom Accessories
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, Low Compression Set, Good Electrical Properties, Good Mechanical Properties, Fast Curing, Low Coefficient of Friction
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3066/80 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
ELASTOSIL® R 402/60 US
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Transfer Molding, Compression Molding
End Uses:
Profiles, Door Profiles, Medical/Healthcare Applications
Features:
High Consistency, Good Green Strength, Shorter Cycle Time, Good Extrusion Properties, High Tensile Strength, Food Contact Acceptable, Excellent Transparency Properties, High Clarity, Good Moldability, Good Mechanical Properties
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® R 402/60 US is a high-consistency silicone rubber (HCR) that is known for its high transparency and good mechanical properties. This product has a high green strength, making it suitable for the production of complex extruded profiles. Its vulcanizing characteristics allow for short cycle times in the manufacturing of rubber moldings through compression, transfer, and injection molding processes. The post-cured vulcanizates of this product are suitable for applications in the health care and food handling industries. ELASTOSIL® R 402/60 US is formulated with ingredients that are suitable for food contact applications, complying with Title 21 "Food and Drugs," Part 177.2600, which regulates rubber articles intended for repeated use. However, it is the responsibility of the user to ensure compliance with this regulation due to its limitations.
ELASTOSIL® LR 3040/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Household Goods
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3040/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent).
ELASTOSIL® LR 3003/30 R A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Garden Equipment, Appliances, Lawn Equipment, Automobile Door Seals, Cables, Gaskets, Connectors
Features:
Fast Curing, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, Good Mechanical Properties
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.
ELASTOSIL® LR 3003/05 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, General Purpose
Features:
Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, General Purpose, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
8.0 - 8.0 kN/m
ELASTOSIL® LR 3003/05 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
ELASTOSIL® LR 5040/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices, Bathroom Accessories
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® LR 5040/70 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/70 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
ELASTOSIL® LR 3002/35 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Wires, Cable Accessories, Cables, Insulators
Features:
Low Viscosity, Low Volatility, Good Mechanical Properties, Low VOC, Good Processability, Excellent Dielectric Properties
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3002/35 A/B is a low-viscous, two-component liquid silicone rubber (LSR) compound with excellent processing properties. The material fits very well all requirements for the manufacturing of large articles with special dosing and metering equipment because of its low viscosity.
SILPURAN® 6700/60 A/B
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Features:
Good Electrical Properties, Low Volatility, Good Mechanical Properties, Pigmentable, Low VOC, Fast Curing, Excellent Surface Properties
Tear Strength:
26.0 - 26.0 kN/m
SILPURAN® 6700/60 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/60 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
VINNEX® 2522
Functions:
Filler
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Compatible Polymers & Resins:
Bioplastics, Polybutylene Succinate (PBS), Polyhydroxyalkanoates (PHA), Polylactic Acid (PLA), Polyhydroxybutyrate (PHB)
Processing Methods:
Film Extrusion, Extrusion, Blown Film Extrusion, Calendering, Injection Molding, Thermoforming
End Uses:
Food Packaging, Medical/Healthcare Applications
VINNEX® 2522 is a solid, thermoplastic homopolymer that is transparent, colorless, and odorless. It is produced through the polymerization of vinyl acetate. This product is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.
ELASTOSIL® LR 3015/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Gaskets
Features:
Oil Resistant, Low Compression Set, Low Volatility, Good Mechanical Properties, Cost Effective, Pigmentable, Low VOC, Fast Curing
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® LR 3015/50 A/B is a liquid silicone rubber. It is a paste-like, readily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high oil resistance. It is colored off-white and has moderate mechanical properties. Thanks to the excellent compression set, there is no need to post-cure technical parts.
ELASTOSIL® LR 3040/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Household Goods
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
10.0 - 10.0 kN/m
ELASTOSIL® LR 3040/70 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).
ELASTOSIL® LR 3005/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Cables, Vibration Dampers, Batteries
Features:
Heat Stabilized, Low Volatility, Cost Effective, Pigmentable, Low VOC, Low Compression Set, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
ELASTOSIL® R 701/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Injection Molding
End Uses:
Automotive Components
Features:
Excellent mineral Oil Resistance, High Consistency, Excellent Elasticity, Oil Resistant, Excellent Seal Properties, Reversion Resistance, Low Compression Set, Heat Stabilized
Tear Strength:
17.0 - 17.0 kN/m
ELASTOSIL® R 701/60 OH is a high-consistency silicone rubber (HCR) grade for extrusion and molding applications. The compound is recommended for all kinds of seals that come into contact with mineral oil. ELASTOSIL® R 701/60 OH is used especially when low compression set is crucial for achieving good seal properties. The compound may also be used for making a high-quality silicone-rubber-covered roller.
POWERSIL® 415 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Refractive Field Control Device, Control Devices, Cables, Wires
Features:
Excellent Dielectric Properties, High Consistency
Tear Strength:
25.0 - 25.0 kN/m
POWERSIL® 415 MH is a high-permittivity, high-consistency silicone rubber specifically designed for the production of refractive field control devices for cable accessories. This ready-to-use material is suitable for all types of molding applications and ensures optimal performance in the production of cable accessories requiring refractive field control.
POWERSIL® 310 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Arresters Housings, Bushings, Power Transformers, Insulators, Electrical Components, Arresters
Features:
High Impact Resistance, Long Term Protection, Light Weight, Electrically Insulating, Arc Resistant, Tracking Resistant, Good Mechanical Properties, Shock Resistant, Excellent Dielectric Properties, Excellent Hydrophobic Properties, High Consistency, High LOI (Loss On Ignition), Good Erosion Resistance
Tear Strength:
11.0 - 11.0 kN/m
POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.
ELASTOSIL® LR 3003/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Plugs, Automobile Door Seals, Vibration Dampers, General Purpose, Household Goods, Batteries
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, General Purpose, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
VINNEX® 2501
Functions:
Filler
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Ethylene Copolymer
Compatible Polymers & Resins:
Bioplastics, Polybutylene Succinate (PBS), Polyhydroxyalkanoates (PHA), Polylactic Acid (PLA), Polyhydroxybutyrate (PHB)
Processing Methods:
Film Extrusion, Extrusion, Blown Film Extrusion, Calendering, Injection Molding, Thermoforming
End Uses:
Food Packaging, Medical/Healthcare Applications
VINNEX® 2501 is a vinyl acetate/ethylene copolymer powder that is frequently employed for blending with natural fibers or flours like wood, starch, and cork. Its versatility shines in the modification of biopolymers and their compounds, making it an excellent choice as an additive for biopolymers as well as for various applications such as PBS, PHA/PHB, and PLA.
VINNEX® 2525
Functions:
Filler
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Compatible Polymers & Resins:
Bioplastics, Polybutylene Succinate (PBS), Polyhydroxyalkanoates (PHA), Polylactic Acid (PLA), Polyhydroxybutyrate (PHB)
Processing Methods:
Film Extrusion, Extrusion, Blown Film Extrusion, Calendering, Injection Molding, Thermoforming
End Uses:
Food Packaging, Medical/Healthcare Applications
VINNEX® 2525 is a solid, thermoplastic homopolymer obtained through the polymerization of vinyl acetate. This resin is clear, colorless, and tasteless. It is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.
ELASTOSIL® LR 3040/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Household Goods
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® LR 3040/60 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).
SILPURAN® 6740/40 A/B
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Features:
Tear Resistance, Food Contact Acceptable, Low Volatility, Good Mechanical Properties, Pigmentable, Low VOC, Fast Curing, Excellent Surface Properties
Tear Strength:
27.0 - 27.0 kN/m
SILPURAN® 6740/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber compound with a short curing time. Vulcanizates are noted for their self-adhesive properties on various substrates and excellent mechanical properties. SILPURAN® 6740/40 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
ELASTOSIL® LR 3004/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Good Mechanical Properties, Cost Effective, Pigmentable, Low VOC, Fast Curing
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® LR 3004/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
ELASTOSIL® LR 3043/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
Features:
Tear Resistance, Good Electrical Properties, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Good Mechanical Properties, Cost Effective, Pigmentable, Low VOC, Fast Curing
Tear Strength:
8.0 - 8.0 kN/m
ELASTOSIL® LR 3043/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
POWERSIL® 730 A/B
Processing Methods:
Injection Molding
End Uses:
Cables, Wires, Cable Accessories, Insulators
Features:
Easier Processing, Good Processability, Outdoor Durability, Electrically Insulating, Arc Resistant, Good Electrical Properties, Tracking Resistant, Low Viscosity, Good Mechanical Properties, Good Weather Stability, Excellent Dielectric Properties, Excellent Hydrophobic Properties, Good Erosion Resistance, UV Resistant
Tear Strength:
26.0 - 26.0 kN/m
POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.
ELASTOSIL® R 755/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Extrusion, Injection Molding, Compression Molding
End Uses:
Tubing, Profiles, Household Goods
Features:
High Consistency, Steam Resistant
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® R 755/60 OH is a high-consistency silicone rubber grade developed specifically for manufacturing articles with good steam resistance. This product is steam-resistant and is suitable both for extrusion of tubings and profiles and for compression, transfer, and injection molding.
VINNEX® 2504
Functions:
Filler
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Ethylene Copolymer
Compatible Polymers & Resins:
Bioplastics, Polybutylene Succinate (PBS), Polyhydroxyalkanoates (PHA), Polylactic Acid (PLA), Polyhydroxybutyrate (PHB)
Processing Methods:
Film Extrusion, Extrusion, Blown Film Extrusion, Calendering, Injection Molding, Thermoforming
End Uses:
Food Packaging, Medical/Healthcare Applications
VINNEX® 2504 is a vinyl acetate/ethylene copolymer powder known for its soft and flexible nature, which is a result of its relatively high ethylene content. The resin has a glass transition temperature below the freezing point. Typical applications for VINNEX® 2504 include blending with natural fibers or flours like wood, starch, and cork. It is highly recommended for modifying biopolymers and their compounds.
VINNEX® 2526
Functions:
Filler
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Compatible Polymers & Resins:
Bioplastics, Polylactic Acid (PLA), Polybutylene Succinate (PBS), Polyhydroxyalkanoates (PHA)
Processing Methods:
Film Extrusion, Extrusion, Injection Molding, Blown Film Extrusion, Thermoforming, Calendering
End Uses:
Medical/Healthcare Applications, Food Packaging
VINNEX® 2526 is a solid, thermoplastic homopolymer derived from the polymerization of vinyl acetate. This clear and colorless resin possesses a tasteless quality. It finds common applications in the modification of biopolymers and biopolymer compounds, as well as in blending with natural fibers or flours such as wood, starch, and cork.
ELASTOSIL® R 401/10 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Extrusion
End Uses:
Tubes, Exhaust Duct Systems, General Purpose, Profiles
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose, Good Damping, Good Mold Release, Low Hardness, Heat Resistance, Good Mechanical Properties, High Flexibility, High Elongation, High Consistency
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R 401/10 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics. This product serves as a low-duro silicone rubber base suitable for extrusion and molding applications. It is also used in the manufacturing of silicone sponge articles in combination with peroxide crosslinkers.
ELASTOSIL® R 401/70 OH US
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding, Transfer Molding, Compression Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, Translucent, High Clarity, Good Moldability, Good Mechanical Properties, Excellent Mechanical Strength, High Flexibility, High Consistency
Tear Strength:
175.0 - 175.0 kN/m
ELASTOSIL® R 401/70 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.
ELASTOSIL® LR 3170/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Automobile Door Seals
Features:
Flame Retardant, Good Electrical Properties, Low Flammability, Low Volatility, Heat Resistance, Good Mechanical Properties, Cost Effective, Low VOC, Fast Curing
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® LR 3170/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3170 series. It is a paste-like, low-inflammable, two-component compound with an extremely short curing time. The vulcanizates of this product are noted for their excellent mechanical and electrical properties.
ELASTOSIL® LR 5040/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices, Bathroom Accessories
Features:
Food Contact Acceptable, Excellent Transparency Properties, Low Volatility, Cost Effective, Excellent Productivity, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 5040/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/40 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
ELASTOSIL® LR 3005/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers, Batteries
Features:
Heat Stabilized, Low Volatility, Cost Effective, Pigmentable, Low VOC, Low Compression Set, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3005/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
ELASTOSIL® LR 3040/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Household Goods
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, Tear Resistance, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3040/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Especially noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent),
ELASTOSIL® LR 3003/80 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers, General Purpose
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Low Volatility, Cost Effective, Pigmentable, Low VOC, General Purpose, Good Electrical Properties, Good Mechanical Properties, Fast Curing
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® LR 3003/80 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Show
36
of 112 results
1
2
3
4