Products

SILRES® BS 280 CF is a solvent-free silicone concentrate based on silane or siloxane. Like SILRES® BS 280, it can be diluted with organic solvents. Diluted solutions of SILRES® BS 280 CF serve as high-quality water repellents for impregnating mineral building materials, particularly silicate-free natural stones like limestone or gypsum. It also develops its water-repellent effect through a reaction with atmospheric humidity.

GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This versatile product finds applications in various industries. It is commonly used in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 93 offers excellent adhesion and bonding properties, making it an ideal choice for a wide range of applications in the construction and home improvement sectors.

ELASTOSIL® 8000 N is a one-part, neutral-curing, low-modulus silicone sealant with excellent adhesion and a long shelf life for perimeter sealing and glazing applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

GENIOSIL® XL 70 is a clear, colorless liquid known as an alkoxyarylsilane. When exposed to moisture, it undergoes hydrolysis, leading to the formation of silanols and the release of methanol. These silanols can further react to form siloxanes. GENIOSIL® XL 70 finds applications in building & construction adhesives and flooring installation.

ELASTOSIL® 6100 is a one-component, acid-curing, non-sag silicone sealant for general purpose sealing in do-it-yourself (DIY) applications, especially in sanitary areas. ELASTOSIL® 6100 cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

VINNAPAS® EP 760 is a unique rapid-setting vinyl acetate-ethylene copolymer dispersion. It stands out as more than just a high-solids version of the VINNAPAS® EP series. This polymer exhibits exceptional adhesion to challenging substrates that are typically difficult to bond, such as polyester, polyethylene terephthalate, tempered aluminum foil, and polystyrene.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

ELASTOSIL® R Plus 4370/50 is a two-component high consistency silicone rubber designed for the manufacturing of extruded articles. It utilizes addition curing and possesses self-bonding properties. This product is well suited for the production of two-component combinations using pressure-free extrusion or co-extrusion techniques.

SILRES® BS 1803 is a solvent-free emulsion based on organo-modified silanes and siloxanes. It is specifically designed to act as a water-repellent admixture for semi-dry concrete and other non-load-bearing cement-based building materials, including paving stones and concrete blocks. SILRES® BS 1803 helps to minimize the amount of water absorbed by the concrete or other cement-based materials, thereby enhancing their durability and resistance to moisture-related issues.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.

SILRES® BS 5133 is an aqueous and water-dilutable emulsion of reactive polydimethylsiloxane (PDMS). It is specifically formulated to provide water repellency to thermal insulation materials made of glass or stone mineral wool that are bound with organic binder systems. SILRES® BS 5133 has been carefully developed and optimized to ensure compatibility with binders based on carbohydrates, allowing for effective integration into various insulation materials and systems.

ELASTOSIL® 5000 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and very good processing properties for construction and industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

SILRES® BS 5350 is a pure liquid siloxane specifically designed to provide water repellency to autoclaved aerated concrete (AAC) and effectively reduce its capillary water absorption. It is suitable for application on AAC with densities above 150 kilograms per cubic meter. Despite being a non-water-based product and free from surfactants or solvents, SILRES® BS 5350 is commonly used as an integral or in-mass hydrophobizing additive in the aqueous AAC slurry. It disperses within the mixer through the shear forces generated between the liquid and solid components.

SILRES® IC 678 is a solventless, reactive, methoxyfunctional phenyl polysiloxane with a narrow molecular weight distribution. This solvent-free liquid resin is specifically designed to enhance the weathering and heat resistance of organic resins. It is highly suitable for incorporating a compatible silicone component into other binder systems, thereby increasing their weathering or heat resistance properties. By adding SILRES® IC 678 to binder formulations, the overall performance and durability of the resulting materials can be significantly improved.

ELASTOSIL® 7100 P is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing and window applications, industrial applications, and sanitary areas. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

SILRES® BS 30 is a solventless silicone concentrate based on a mixture of silane and siloxane. In its undiluted form, it provides water and stain repellency to mineral substrates while enhancing their appearance. SILRES® BS 30 is suitable for a wide variety of mineral substrates used in the tile industry, including tumbled marble, limestone, slate, and saltillo clay tile.

VINNOL® E 15/45 is a copolymer composed of approximately 85 wt.% vinyl chloride (VC) and 15 wt.% vinyl acetate (VAc). It serves as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

SILRES® BS 1702 is a solvent-free mixture of silane and siloxane that can be applied either in undiluted form or diluted with organic solvents. It is specifically designed as a high-quality specialty water repellent for impregnating fiber cement. When applied to fiber cement, SILRES® BS 1702 acts as an effective water repellent, helping to protect the material from moisture absorption and potential damage caused by water.

VINNAPAS® EF 8300 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was specifically formulated as a high-performance polymer for interior architectural coating formulations, offering environmental advantages. This technology serves as an alternative to various other technologies, including vinyl acrylic/acrylic blends, vinyl acrylics with wet adhesion, and pure acrylics.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

WACKER® Plasticizer 100 is a colorless, clear, and odorless liquid with a density of approximately 0.96 g/cm³ at 25°C. It is not soluble in water. This product is commonly used in silicone sealants. WACKER® Plasticizer 100 serves as a raw material for the production of RTV-1-silicone rubbers.

VINNAPAS® EP 6300 is a high-solids vinyl acetate-ethylene (VAE) copolymer dispersion with carboxylation. It has a glass transition temperature (Tg) of 0°C. This dispersion exhibits excellent adhesion to films and metals, and it also offers impressive cohesive film strength. Furthermore, it has the ability to be crosslinked.

SILRES® BS SMK 1311 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield microemulsions. The dilute aqueous solution of SILRES® BS SMK 1311 serves as a high-quality, general-purpose water repellent for impregnating and priming mineral and even alkaline substrates. SILRES® BS SMK 1311 also serves as a chemical damp-proofing agent in a diluted aqueous solution.

WACKER® Polymer FD 50 is a colorless, clear, and odorless liquid that is not miscible with water. It is used as a raw material for the production of RTV-1 silicone rubbers. This product serves as a special raw material for silicone compounding, particularly in the production of sealants and silicone sealants.

SILRES® BS 1705 is a high-quality water-thinnable emulsion that is solvent-free and based on a mixture of silane and siloxane compounds. It is specifically designed to act as a specialty water repellent for impregnating cement-based products, including fiber cement. By impregnating cement-based materials, such as fiber cement, with SILRES® BS 1705, their water repellency is significantly enhanced, providing long-lasting protection against water absorption and related problems. This makes SILRES® BS 1705 an excellent choice for improving the durability and performance of cement-based products in various applications.

ELASTOSIL® 6000 is a one-component, acid-curing silicone sealant for general-purpose sealing in do-it-yourself applications. ELASTOSIL® 6000 cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber. It adheres excellently to glass, vitrified surfaces, ceramic tiles, selected plastics, and most coatings.

GENIOSIL® GF 82 is an epoxy-functional alkoxysilane. It is a clear, colorless liquid with a characteristic odor similar to gasoline. It hydrolyzes slowly in the presence of water, releasing ethanol, and forms silanols that can react with themselves to produce siloxanes or bind to inorganic substrates. The epoxy group on GENIOSIL® GF 82 can undergo a ring-opening reaction with nucleophiles such as alcohols and amines.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

VINNAPAS® CA 5824 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium/firm hand is required. VINNAPAS® CA 5824 combines high solids content with a low viscosity—a combination that permits the addition of very high filler loadings, such as calcium carbonate, aluminum trihydrate (ATH), or other fillers. This results in adhesive formulations with high solid contents of 80 percent or even greater.

ELASTOSIL® K760 C is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, excellent tooling characteristics, and very good fire retardant properties for construction, glass, and window building, as well as industrial applications. ELASTOSIL® K760 C cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.