Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
Features & Benefits
- Materials Features
- Ready-to-Use Product Features
- Special Features
- Addition Curing
- Flowable
- Two-component
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Electrics & Electronics
- Encapsulation
- Hydroelectric Power Plants
- Railway Industry
- Application Details
- All-round Potting Compound
- Technical Moldings
- Encapsulation Of Electronic Components
- Slot Exit Potting For Electrical Coils
Important note:
- The platinum catalyst is in component B.
- A and B components may only be used together if they have the same batch number.
Properties
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Excellent Mechanical Properties
- Low Hardness
| Value | Units | Test Method / Conditions | |
| Curing Time (A+B, at 23°C) | 12 | hours | — |
| Dynamic Viscosity (A+B, at 23°C, Spindle 5, 2.5 Upm) | 12000 | mPa·s | DIN EN ISO 2555 |
| Mix Ratio (A:B) | 9:1 | parts by weight | — |
| Pot Life (A+B, at 23°C, up to 60000 mPa.s) | 60 | minutes | — |
| Value | Units | Test Method / Conditions | |
| Density (at 23.0°C) | 1 | g/cm³ | DIN EN ISO 1183-1 A |
| Elongation (at break) | 550 | % | ISO 37 Type 1 |
| Linear Shrinkage | max. 0.1 | % | — |
| Shore Hardness A | 27 | — | DIN ISO 48-4 |
| Tear Strength | 30 | N/mm | ASTM D 624 B |
| Tensile Strength | 6.5 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Density (at 23°C, Componenet B) | 0.97 | g/cm³ | DIN EN ISO 2811-1 |
| Dynamic Viscosity (Component A, at 23°C, Spindle 1, 2.5 Upm) | 18000 | mPa·s | DIN EN ISO 2555 |
| Dynamic Viscosity (Component B, at 23°C, Spindle 5, 2.5 Upm) | 800 | mPa·s | DIN EN ISO 2555 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Compliance
Meets the requirements of EN 45545-2:2020 for Hazard Level HL1 (requirement set R22), and for Hazard Level HL1 and HL2 (requirement set R23 and R24), respectively.
Safety & Health
- Safety Note
Components of the addition-curing grade ELASTOSIL® RT 622 A/B contain only constituents that over many years have proved to be neither toxic nor aggressive.
Packaging & Availability
- Country Availability
- Regional Availability