Products

ELASTOSIL® R 416/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.

ELASTOSIL® LR 3074/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3074 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3092/65 A/B is a paste-like, two-component liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +210°C, and for a short time up to 300°C. Low compression sets can be achieved after post-curing.

ELASTOSIL® R 863/65 MH is a peroxide-curing silicone rubber known for its exceptional green strength, which greatly improves calendering and extrusion performance. When uncured, the extruded hoses made from this silicone rubber exhibit high dimensional stability and a non-sticky surface. ELASTOSIL® R 863/65 is specifically formulated as a high green-strength peroxide-curing silicone rubber. It is recommended to add heat stabilizers when operating at service temperatures exceeding 180 °C.

ELASTOSIL® RT 728 A/B is a two-part paste-like silicone rubber that can be thermally cured. When vulcanized, it exhibits excellent resistance to coolants and has a low compression set. This product is commonly used in applications such as bonding and sealing, as well as in the production of cured-in-place gaskets (dry type). Its notable properties include strong adhesion on synthetic materials that are resistant to antifreeze-water mixtures, as well as a low compression set.

ELASTOSIL® E303 Transluzent is an acetoxy-cure, free-flowable, solvent-based RTV-1 silicone dispersion. It cures at room temperature or at elevated temperatures by reacting with air humidity to form a flexible silicone coating. A typical application is the selective coating of heat exchangers (automotive radiators).

ELASTOSIL® R 760/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.