Products

ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

SILPURAN® 6000/10 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/10 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

BELSIL® eco DM 5 is an unmodified, linear polydimethylsiloxane derived from renewable raw materials, certified according to the "TÜV NORD Standard REDcert²." This product features low surface tension and a high spreading coefficient. The flexible polymer backbone of dimethicones enables excellent gas permeability, allowing the skin to breathe by facilitating the passage of gasses such as water vapor and oxygen.

BELSIL® PF 100 is an aryl- and alkyl-modified silicone fluid of medium viscosity. BELSIL® PF 100 is characterized by having a higher refractive index than standard dimethicone fluids (1.38-1.40). It offers significant improvements in regards to gloss and shine. BELSIL® PF 100 is used in all kinds of cosmetic formulations, but mostly in hair care compositions and color cosmetics due to its shine-enhancing benefits.

HDK® H20 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H20 is used as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. It also serves as a reinforcing filler in elastomers, particularly silicone-elastomers. Additionally, HDK® H20 acts as a free flow additive in the production of powder coatings.

VINNAPAS® 510 ED is a polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. VINNAPAS® 510 ED offers several advantages in building chemical applications as well as in general adhesives. To achieve optimum weathering resistance, opaque pigments should be used to ensure adequate pigmentation.

ELASTOSIL® SOLAR 1200 is a non-slump, condensation-curing RTV-2 silicone adhesive designed for the solar industry. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® SOLAR 1200 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

ELASTOSIL® Color Paste FL Black RAL 9011 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

BELSIL® W 3230 is a blend of dimethicone and stearoxy-modified polydimethylsiloxane. It is a white wax that offers effective protection against aqueous media. In skin care formulations, BELSIL® W 3230 creates a protective barrier, providing moisturizing benefits. It imparts a non-greasy, soft, velvety feel to the skin and exhibits excellent compatibility with a wide range of cosmetic raw materials. In color cosmetic formulations, it enhances gloss and brilliance, contributing to a more lustrous appearance.

ETONIS® 1400 S is a polymer dispersion designed for soil stabilization purposes. When applied to the soil, this product creates polymer bridges between the soil or aggregate particles and the hydrated cement particles. These bridges contribute to the formation of a flexible and strong network that is both durable and resistant to water.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

ELASTOSIL® LR 3001/55 FR A/B is a paste-like, low-inflammable, two-component compound of liquid silicone rubber. The excellent flame retardancy is confirmed by the achieved UL94-V0 listings at 0.75 mm and 3 mm thickness and f1 rating according to UL746C: Unterwriters Laboratories File E75704 (Wacker Chemie AG). It exhibits good heat resistance, high oil resistance, and short curing times, which are further benefits of this material.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.

WACKER® AK 30000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 30000 mm²/s. Its chemical structure provides it with exceptional properties that differentiate it from organic materials like mineral oils. Notably, WACKER® AK 30000 exhibits good dielectric properties, making it suitable for applications requiring electrical insulation. Additionally, it has low surface tension, which contributes to its high surface activity.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

Wacker Chemie 1,1,3-Trichloroacetone (1,1,3-TCA) is a colorless to reddish, lachrymatory liquid with a pungent odor. It serves as an intermediate in the production of folic acid. Additionally, it is used as a building block for the synthesis of active pharmaceutical ingredients (APIs), including vitamins. Furthermore, it is utilized as a building block for agrochemical substances and actives.

ELASTOSIL® Color Paste PT Green RAL 6032 F is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® RT 402 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is characterized by its antistatic properties, condensation-curing mechanism, and flowability. This silicone rubber is commonly used in applications such as elastomers for pad printing, where its unique properties are beneficial.

BELSIL® DM 12500 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 12500 mm²/s. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gasses such as water vapor and oxygen, allowing the skin to respire.

ELASTOSIL® AUX FL Non-Healing is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures homogeneous covulcanization without migration, as may be observed for systems based on silicone oil. It can be used to reduce self-healing and other sticking phenomena.

ELASTOSIL® LR 3066/30 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® R Plus 4000/60 is a two-component, high consistency silicone rubber designed for the production of molded articles. Once cured, these articles exhibit exceptional tear resistance and high transparency. This fast-curing silicone rubber demonstrates impressive elongation values and maintains excellent tear resistance. The addition cure process enables a significantly faster vulcanization reaction compared to peroxide curing materials. Furthermore, no peroxide decomposition products are formed during vulcanization.

LIOSIL® TS 80 E is a specially developed macroemulsion of a functional silicone fluid designed as a softener for the tissue industry. It provides an excellent soft touch along with very good hydrophilicity. This product can be easily diluted with water and exhibits high substantivity on cellulose fibers.

ELASTOSIL® LR 3671/30 A/B is a self-adhesive liquid silicone rubber from the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.

VINNEX® 2522 is a solid, thermoplastic homopolymer that is transparent, colorless, and odorless. It is produced through the polymerization of vinyl acetate. This product is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.

ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

SILFOAM® SE 6 is a milky, comparatively viscous antifoam emulsion used in various fields, including cosmetic and food contact applications. It contains broad-spectrum, physiologically safe active ingredients based on polydimethylsiloxane and silicon. SILFOAM® SE 6 is widely used for controlling foam in systems and products that might come into indirect contact with foodstuffs, such as cleaners for food containers, conveyor systems, and storage surfaces.

ELASTOSIL® LR 3844/50 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® SOLAR 1109 White is a solvent-free and non-corrosive, one-part silicone adhesive that does not slump. Upon exposure to air moisture, ELASTOSIL® SOLAR 1109 White cures at room temperature, resulting in a permanently flexible silicone rubber with excellent mechanical properties. When fully cured, it exhibits long-term stability against weathering, moisture, and UV radiation. This silicone elastomer can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without sustaining any damage.

WACKER® L 067 is a superspreading surfactant based on trisiloxane technology. Due to its unique structure, WACKER® L 067 exhibits high surface activity, allowing it to effectively wet and spread on almost any hydrophobic surface. It has versatile applications, including use as a tank-side adjuvant to improve spray coverage and uptake, or to reduce spray volume. It can also serve as an adjuvant in agrochemical formulations.

BELSIL® DM 1000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is known for its low surface tension and high spreading coefficient. Dimethicones, like BELSIL® DM 1000, have a flexible polymer backbone that enables them to have high permeability to gasses such as water vapor and oxygen. This property allows the skin to breathe and maintain its natural respiration.

ELASTOSIL® Color Paste PT Orange RAL 2004 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® Color Paste PT Light Blue RAL 5015 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

SILFOAM® SC 120 is an anhydrous antifoam compound known for its low viscosity, making it easier to handle compared to high-viscosity alternatives. It demonstrates exceptional resistance to alkaline environments, showcasing its versatility in various applications. The excellent alkali resistance of SILFOAM® SC 120 further enhances its suitability for a wide range of uses.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.