Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Wacker Chemie AG
All Wacker Chemie AG
Search products
Matching Product Categories
Elastomers
Ready-to-Use Products
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
218 Products found on Wacker Chemie AG
Most Viewed
SDS
With SDS
TDS
With TDS
ELASTOSIL® M 4635 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making, Bathroom Accessories
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Medium Hardness, Good Flow, Low Shrinkage, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing, Food Contact Acceptable
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4635 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4635 A/B is in making molds for concrete casting. This grade is also compliant with FDA and BfR regulations for food contact applications.
ELASTOSIL® R Plus 4305/70 US
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Tear Resistance, Food Contact Acceptable, Excellent Transparency Properties, Good Mechanical Properties, High Consistency
Tear Strength:
46.0 - 46.0 kN/m
ELASTOSIL® R Plus 4305/70 US HCR silicone rubbers are addition-curing, two-part compounds (batch grades). The vulcanizates of these silicone rubbers exhibit excellent transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4305/70 US is specifically designed for the fabrication of extruded articles that require high transparency and very good tear resistance values.
ELASTOSIL® R Plus 4360/60 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Tubes, Hoses, Cables
Features:
High Consistency, Tear Resistance, Food Contact Acceptable, High Elasticity, Heat Stabilized, Good Mechanical Properties, Fast Curing
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.
ELASTOSIL® R Plus 4285/30
Polymer Name:
Silicone Elastomer
End Uses:
Catheter Balloons
Features:
High Elongation, High Consistency
ELASTOSIL® R Plus 4285/30 is designed for the production of molded articles, particularly catheter balloons, that exhibit high elongation and low tension set. This addition-curing, two-part compound is composed of HCR silicone rubber. The vulcanizates of ELASTOSIL® R Plus 4285/30 demonstrate excellent transparency and good to very good mechanical properties.
ELASTOSIL® R Plus 4001/50 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Odorless, Fast Curing, High Consistency
Tear Strength:
39.0 - 39.0 kN/m
ELASTOSIL® R Plus 4001/50 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber demonstrate high transparency and exhibit good to very good mechanical properties. This fast-curing silicone rubber offers excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
SILMIX® M40 Red
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 Red is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are known for their good flexibility and mechanical properties. SILMIX® M40 Red is designed for fabricating molded articles. Additionally, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® M 4470
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Long Potlife, High Hardness, High Rigidity, Good Flow, Low Viscosity, Pourable, Heat Resistance, Good Thermal Stability, Excellent Flowability, Thermally Conductive, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:
4.0 - 4.0 kN/m
ELASTOSIL® M 4470 is a room-temperature-curing silicone rubber (RTV-2) that is pourable and condensation-curing. It consists of two components and vulcanizes at room temperature. This grade offers good flowability and self-deaeration, making it easy to handle during the molding process. Additionally, it exhibits outstanding resistance to common casting resins. The main application of ELASTOSIL® M 4470 is in making molds for casting low-melting metal alloys.
ELASTOSIL® R Plus 4305/80
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Cables, Ignition Cables, Wires, Battery Cable, Plugs
Features:
Low Compression Set, Good Mechanical Properties, Fast Curing, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® R Plus 4305/30
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Low Compression Set, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Fast Curing, High Consistency
Tear Strength:
43.0 - 43.0 kN/m
ELASTOSIL® R Plus 4305/30 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® M 4511
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
High Strength, Long Potlife, Good Tear Strength, Low Hardness, Good Flow, Chemical Resistant, Pourable, High Flexibility, Excellent Flowability, High Performance, High Elongation, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® M 4511 is a room-temperature-curing silicone rubber (RTV-2) that is pourable and condensation-curing. It consists of two components and vulcanizes at room temperature. This grade exhibits outstanding chemical resistance to attack by polyester and polyurethane resins, resulting in a significantly extended mold life. The main application of ELASTOSIL® M 4511 is in making cost-effective molds, particularly well-suited for casting PE (polyethylene) and PU (polyurethane) resins.
SILMIX® M70 Red
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
29.75 - 29.75 kN/m
SILMIX® M70 Red is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are known for their good flexibility and mechanical properties. SILMIX® M70 Red is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® RT 646 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
2K (2 component) Sealant, Potting Compound, Encapsulant
Cure Method:
Heat Cure, Air Dry, Chemical Cure
ELASTOSIL® RT 646 A/B is a castable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material with resistance against casting resins, making it suitable for various applications such as encapsulation of electronic components, all-round potting compound, and mold making in reproduction molding.
ELASTOSIL® R 427/30
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Extrusion, Injection Molding
End Uses:
Door Profiles, Medical/Healthcare Applications, Profiles
Features:
Excellent Transparency Properties, High Clarity, High Strength, Good Moldability, Good Tear Strength, Tear Resistance, Good Mechanical Properties, High Consistency, Shorter Cycle Time, High Tensile Strength
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.
ELASTOSIL® R 752/70 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components
Features:
Low Modulus, Low Resilience, High Consistency, Good Damping
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® R 752/70 OH is a high-consistency silicone rubber (HCR) known for its unique properties. The vulcanizates produced from this product exhibit very low rebound resilience and high damping capability. It is particularly suitable for the manufacturing of low-modulus rubber articles using compression, transfer, or injection molding techniques.
ELASTOSIL® P 7600 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.5 - 1.5 kN/m
ELASTOSIL® P 7600 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
ELASTOSIL® R Plus 5305/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Ignition Cables, Battery Cable
Features:
Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Fast Curing, High Consistency, Platinum Catalyzed
Tear Strength:
42.0 - 42.0 kN/m
ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.
ELASTOSIL® M 4125 F A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Room Temperature Vulcanizing, Low Shrinkage, Food Contact Acceptable, Low Viscosity, Pourable, Good Mechanical Properties, Long Potlife, Ease of Handling, Fast Curing, Good Shrinkage Resistance, Excellent Flowability, Medium Hardness
ELASTOSIL® M 4125 F A/B is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature. It provides a very fast and non-shrink cure at room temperature, allowing for efficient and reliable mold-making. The main application of ELASTOSIL® M 4125 F A/B is in the production of shrink-free molds with excellent reproduction accuracy.
SILMIX® E70 White
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
26.95 - 26.95 kN/m
SILMIX® E70 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® E70 White is designed for fabricating extruded articles using high-consistency silicone rubber (HCR). Post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® R 420/40 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Profiles, Bathroom Accessories, Tubes, Tubing, Exhaust Duct Systems, Gaskets, Vibration Dampers
Features:
High Flexibility, High Consistency, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Pigmentable, Good Processability, General Purpose, Tear Resistance, Good Mechanical Properties
Tear Strength:
34.0 - 34.0 kN/m
ELASTOSIL® R 420/40 S is a high-consistency silicone rubber (HCR) that features outstanding tear resistance and high transparency. The peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is known for its good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and demonstrate good processing characteristics.
ELASTOSIL® R 771/60 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Compression Molding, Calendering
End Uses:
Cup Holders, Bellows
Features:
High Consistency, High LOI (Loss On Ignition), Flame Retardant
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® R 771/60 OH is a peroxide-curing HCR silicone for the manufacture of flame retardant products, particularly designed for railway applications. The product has been tested according to EN 45545-2 requirement sets R1, R7 (HL2). The color of the rubber base is white.
SILMIX® M40 White
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
High Consistency, Good Mechanical Properties, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M40 White is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
ELASTOSIL® P 26028 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Anti-Decubitus Cushions, Medical Devices
Features:
Low Viscosity, Good Damping, Good Adhesion
ELASTOSIL® P 26028 A/B is a pourable, addition-curing RTV-2 silicone rubber that cures at room temperature. It provides a very fast and non-shrink cure at room temperature, allowing for efficient and reliable mold-making. The main application of ELASTOSIL® P 26028 A/B is in the production of shrink-free molds with excellent reproduction accuracy.
POWERSIL® 3525 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Cables, Wires, Cable Accessories, Arresters
Features:
Good Moldability, Electrically Insulating, Good Tracking Resistance, Tracking Resistant, Good Mechanical Properties, Fast Curing, Excellent Dielectric Properties, High Consistency, Good Erosion Resistance
Tear Strength:
30.0 - 30.0 kN/m
POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.
CENUSIL® M 825 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Low Hardness, Self Deaeration, Room Temperature Vulcanizing, Low Viscosity, Pourable, Good Mechanical Properties, Fast Curing, Good Shrinkage Resistance, Excellent Flowability, Good Tear Strength
Tear Strength:
20.0 - 20.0 kN/m
CENUSIL® M 825 A/B is a room-temperature curing silicone rubber (RTV-2) that is pourable and cures at ambient temperature. This addition-curing silicone rubber is specifically designed for making molds used in concrete casting. Moreover, CENUSIL® M 825 A/B is compliant with food contact regulations, including FDA and BfR standards.
ELASTOSIL® R Plus 4305/80 US
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Food Contact Acceptable, Excellent Transparency Properties, Good Mechanical Properties, High Consistency, Tear Resistance
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4305/80 US HCR silicone rubbers are addition-curing, two-part compounds (batch grades). The vulcanizates of these silicone rubbers exhibit excellent transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4305/80 US is specifically designed for the fabrication of extruded articles that require high transparency and very good tear resistance values.
ELASTOSIL® P 7671 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Cushions, Orthotics, Prosthetics, Medical Devices
Features:
Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:
1.5 - 1.5 kN/m
ELASTOSIL® P 7671 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.
ELASTOSIL® M 4642 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Long Potlife, Good Shrinkage Resistance, Good Tear Strength, Medium Hardness, Good Flow, Low Shrinkage, Pourable, Good Mechanical Properties, Excellent Mechanical Strength, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® M 4642 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. It offers a fast and non-shrink cure at room temperature, which can be significantly accelerated with the application of heat. It is used in making shrink-free molds with excellent reproduction accuracy.
ELASTOSIL® R Plus 4350/55
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Household Goods
Features:
High Resilience, Food Contact Acceptable, Heat Stabilized, Heat Resistance, Good Mechanical Properties, Good Thermal Stability, Fast Curing, High Consistency
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® R Plus 4350/55 is a two-component high consistency silicone rubber designed for the manufacture of extruded articles. It utilizes an addition-curing system and offers excellent heat stability. This product is suitable for various applications including household applications, where it can be used for addition curing, food-contact, heat resistance, and high rebound resilience.
ELASTOSIL® R 865/50 S
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Automotive Components
Features:
Pigmentable, Good Processability, High Consistency, Excellent Rebound, Low Compression Set, High Resilience, Food Contact Acceptable
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® R 865/50 S provides various functional advantages. This material delivers superior rebound resilience and minimal compression set. The compounds can be easily pigmented using ELASTOSIL® PT Pigment Pastes and exhibit favorable processing characteristics. The different grades available, ranging from ELASTOSIL® R 865/40 to ELASTOSIL® R 865/70, can be blended in any proportion to achieve intermediate hardness levels.
ELASTOSIL® R 862/60 OH
Polymer Name:
Silicone Elastomer
End Uses:
Bellows, Automotive Components, Gaskets
Features:
Low Compression Set, High Resilience, High Elasticity, Heat Stabilized, Hot Air Resistant, Heat Resistance, Good Thermal Stability, High Consistency
Tear Strength:
15.0 - 15.0 kN/m
Vulcanizates of ELASTOSIL® R 862/60 OH are heat-resistant peroxide-curing silicone rubbers that possess particularly good resistance to hot air in combination with several heat stabilizers. The vulcanizates are highly elastic and show extraordinary low compression. The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.
SILPURAN® 2400 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Prosthetics
Features:
Good Damping, Low Skin Sensitivity, Low Hardness, Room Temperature Vulcanizing, Low Viscosity, Biocompatible, Translucent, Pourable, Fast Curing, Excellent Flowability
Tear Strength:
3.0 - 3.0 kN/m
SILPURAN® 2400 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer of low hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2400 A/B can be used for flexible molding applications in prosthetics. The components A and B of SILPURAN® 2400 A/B are mixed homogeneously in a ratio of 1:1 and vulcanize rapidly at temperatures over 100°C.
ELASTOSIL® R Plus 4305/40
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Low Compression Set, Food Contact Acceptable, Heat Stabilized, Excellent Transparency Properties, Good Mechanical Properties, Fast Curing, High Consistency
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® R Plus 4305/40 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® R Plus 4060/50 MH
Polymer Name:
Silicone Elastomer
End Uses:
Automotive Components
Features:
Fast Curing, High Consistency, Tear Resistance, Low Compression Set, High Resilience, Food Contact Acceptable, High Elasticity, Heat Stabilized
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® R Plus 4060/50 MH is an addition-curing, one-component high consistency silicone rubber specifically designed for molding applications. The cured articles produced using this silicone rubber demonstrate excellent elasticity and low compression set. ELASTOSIL® R Plus 4060/50 MH is well-suited for the manufacturing of molded articles.
ELASTOSIL® R 701/50 OH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Injection Molding
End Uses:
Automotive Components
Features:
Excellent mineral Oil Resistance, High Consistency, Excellent Elasticity, Oil Resistant, Excellent Seal Properties, Reversion Resistance, Low Compression Set, Heat Stabilized
Tear Strength:
17.0 - 17.0 kN/m
ELASTOSIL® R 701/50 OH is a high-consistency silicone rubber (HCR) grade for extrusion and molding applications. The compound is recommended for all kinds of seals that come into contact with mineral oil. ELASTOSIL® R 701/50 OH is used especially when low compression set is crucial for achieving good seal properties. It may also be used for making a high-quality silicone-rubber-covered roller.
ELASTOSIL® M 4370 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Good Shrinkage Resistance, High Hardness, High Rigidity, Good Flow, Very Good Heat Resistance, Low Shrinkage, Low Viscosity, Pourable, Heat Resistance, Good Thermal Stability, Fast Curing, Excellent Flowability, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:
4.0 - 4.0 kN/m
ELASTOSIL® M 4370 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4370 A/B is in creating silicone surfaces for printing rollers and making molds for casting low-melting metal alloys. This grade is compliant with FDA and BfR regulations for food contact applications.
SILPURAN® 2420 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Orthotics, Prosthetics
Features:
Translucent, High Hardness, Medium Hardness, Low Skin Sensitivity, Tear Resistance, Low Viscosity, Biocompatible, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing
Tear Strength:
13.0 - 13.0 kN/m
SILPURAN® 2420 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer of medium hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2420 A/B can be used for flexible molding applications in orthopedic technology. Components A and B of SILPURAN® 2420 A/B are mixed homogeneously in a ratio of A:B = 1:1 and vulcanize rapidly at temperatures over 100°C.
Show
36
of 218 results
Go to page
1
2
3
4
5
6
7