POMALUX® Polyoxymethylene (POMC)

1 of 4 products in this brand
Pomalux® Polyoxymethylene (POMC) is a high-performance acetal copolymer used for a wide range of applications. Pomalux® has good chemical and high-temperature resistance. As a semi-crystalline material, Pomalux® has good wear resistance and low frictional characteristics.Pomalux® also has low moisture absorption making Pomalux® a good candidate for a wide range of structural and mechanical components that carry or transmit loads in dry or wet environments .

Polymer Name: Polyacetal Copolymer (POM)

Physical Form: Film, Rods, Sheets, Slab

Features: Chemical Resistant, Dimensional Stability, Excellent Dielectric Properties, Food Contact Acceptable, Good Machinability, High Temperature Resistance, Low Friction, Low Moisture Absorption, Semi Crystalline, Stiffness, Wear Resistant

Density: 1410.0 - 1410.0 kg/m³

Tensile Modulus: 2461.42 - 2461.42 MPa

Color: Black, Natural

Technical Data Sheet

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Technologies

Features & Benefits

Manufacturing Capabilities

Westlake Plastics POMALUX Polyoxymethylene (POMC) Manufacturing Capabilities

Applications & Uses

Applications
  • Jigs and textures
  • Pump and valve parts
  • Bushings and bearings
  • Gears
  • Wear pads
  • Electrical components

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Compressive Strength (10% Deflection)16000psiASTM D695
Flexural Modulus375000psiASTM D790
HardnessM78M ScaleASTM D785
Izod Impact Strength Notched (-40°F)1.2ft•lbs/inASTM D256
Izod Impact Strength Notched (-73°F)1.5ft•lbs/inASTM D256
Tensile Elongation (-40°F)30%ASTM D638
Tensile Elongation (73°F)75%ASTM D638
Tensile Modulus 357000psiASTM D638
Tensile Strength (Yield, -40°F)8800psiASTM D638
Tensile Strength (Yield, 73°F)13700psiASTM D638
Thermal Properties
ValueUnitsTest Method / Conditions
Coefficient of Thermal Expansion1.2x10-4in/in/°FASTM D696
Flammability Rating (060)HBUL94
Heat Deflection Temperature (264 psi)230°FASTM D648
Thermal Conductivity1.6cal/sec/cm2/°C/cmASTM C177
Typical Properties
ValueUnitsTest Method / Conditions
Specific Gravity1.41ASTM D792
Water Absorption (24 hours)0.2%ASTM D570

Regulatory & Compliance

Certifications & Compliance