Products in Construction Adhesives: Tile Adhesive

VINNAPAS® eco 4023 N is a versatile dispersible polymer powder designed for dry-mix mortars. It is particularly suitable for applications such as tile adhesives, ETICS (External Thermal Insulation Composite Systems), and self-leveling compounds. This product is based on a flexible copolymer of vinyl acetate and ethylene, belonging to the VINNAPAS® N product class. As a member of this class, it has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, allowing for a wide range of formulation possibilities.

VINNAPAS® eco 8620 E is a versatile dispersible polymer powder designed for dry-mix mortars, with a specific focus on tile adhesives. This product is based on a flexible copolymer of vinyl acetate, ethylene, and vinyl chloride and belongs to the VINNAPAS® E product class. As a member of this class, it offers enhanced properties such as extended open time and excellent adhesion even after water immersion.

VINNAPAS® eco 5044 N is a dispersible polymer powder designed for dry mix mortars, with specific suitability for applications such as ETICS (External Thermal Insulation Composite Systems), waterproofing membranes, and concrete repair. This product is based on a highly flexible copolymer of vinyl acetate and ethylene, and it falls under the VINNAPAS® N product class. Being part of this class means that it has a neutral impact on rheology while offering essential properties like adhesion and flexibility, allowing for a wide range of formulation options.

VINNAPAS® eco 7220 E is a versatile dispersible polymer powder designed for dry mix mortars, with a specific focus on tile adhesives and tile grouts. This product is based on a flexible copolymer of vinyl acetate, ethylene, and methyl methacrylate, belonging to the VINNAPAS® E product class. As a member of this class, it offers enhanced properties such as excellent adhesion even after water immersion and flexibility.

VINNAPAS® eco 8118 E is a versatile dispersible polymer powder designed for dry mix mortars, particularly suitable for tile adhesives. This product is based on a flexible terpolymer of vinyl acetate, ethylene, and vinyl chloride, belonging to the VINNAPAS® E product class. As a member of this class, it has a neutral impact on rheology and offers extended open time, along with very high adhesion after water immersion and heat storage. These properties provide a high level of formulation flexibility.

Texicryl® 13-065 is a styrene acrylic copolymer emulsion,designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and fix and grouts.

Texicryl® 13-066 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives and is especially suitable for floor tile adhesive. It can be compounded into adhesives with a high degree of flexibility for use with wall and floor ceramic tiles.

Texicryl® 13-078 is a styrene acrylic copolymer emulsion, designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and grouts.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.

Cardolite® NX - 8101 is an epoxy curing agent based on modified CNSL waterborne technology, recommended for epoxy primers and self-levelers for concrete floors.

Cimsil® A55G is a thixotropic powder additive developed for use in cement, lime, and gypsum systems. It is designed to improve properties in both fresh and hardened states of mortars and concrete systems, offering low dust and enhancing workability.

Poraver® 0.1 - 0.4 mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Texicryl® 13-308 is an APEO-free ASE (Alkali-Swellable Emulsion) rheology modifier designed for a broad range of water-based applications. It imparts a short pseudoplastic flow, enhancing the rheological properties of the system. This product is easily mixed into water-based systems and, in many cases, can be added directly to the system to be thickened, followed by pH adjustment.

Texipol® 63-258 is an inverse emulsion thickener known for imparting an extremely short flow to a wide variety of aqueous and non-aqueous compositions, effective across a wide pH range. Supplied as a low-viscosity liquid, it offers almost instantaneous thickening upon direct mixing into the composition. Its polymer, already in solution as the ammonium salt, eliminates the need for additional additives to promote thickening. APEO-free, Texipol® 63-258 is suitable for various applications requiring short flow characteristics.

Pangel® M90F is a high-purity smectite-based additive with a selected particle size, specifically designed to adjust the rheology of joint compounds, plasters, and fillers formulated in both powder and paste. It is recommended for applications requiring a fine particle size. Additionally, Pangel® M90F can serve as a binding agent for both organic and inorganic powders. Its high swelling capacity upon contact with water allows it to disperse easily while retaining high resistance when dry.

Texicryl® 13-313 is an alkali swellable thickener crafted specifically for water-based formulations. This product excels in efficiently modifying viscosities at low shear rates to prevent both settling and sagging.

The Micronized Products Mica 325# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Intercorp Boron Silicate Hollow Glass Microspheres 25 is manufactured with applied coupling agents. T-Series has a general treatment.It can be used as Synthetic marble/Furniture (cast polyester),Insulation coating roller, Polyureathane injection etc.