Products in Construction Adhesives: Alkyds

Tinuvin® 292is a liquid hindered amine light stabilizer (HALS) developed specifically for coatings. It comprises an almost pure mixture of two active ingredients, allowing it to remain in liquid form, unlike the tendency of pure diester to solidify, even at room temperature. The efficiency of Tinuvin 292 significantly prolongs the lifetime of coatings by reducing paint defects such as cracking and loss of gloss. Key features and benefits include versatility in both water and solvent based coatings, extension of coating lifetime, and excellent compatibility with a wide variety of coating systems.

Cardolite® Lite 2020 is a low viscosity multipurpose resin modifier designed for use in coatings, adhesives, and other applications. It features a long hydrophobic aliphatic side chain of the cardanol molecule, providing excellent early water resistance and corrosion protection. It can be used as an epoxy diluent, allowing for enhanced workability and higher solids in formulations without sacrificing performance properties. It can also be used in alkyds, urethanes, and acrylics.

Teckrez® CX-902 is a hydrocarbon resin based on selected C9 and DCPD feedstocks. It is used as an alkyd coating modifier to increase hardness, gloss, and chemical resistance. As a resin binder in printing inks, Teckrez® CX902 improves pigment wetting and solvent release. Teckrez® CX902 is used as a rubber processing aid, tackifier resin in mastic adhesives, and modifier in concrete curing and other coating applications.

FloraRez® DR115 polymerized rosin is produced by the partial dimerization of gum rosin. This catalytic polymerization process results in an elevated softening point while maintaining the acid functionality of rosin. This resin is pale, thermoplastic, crystallization-resistant, and less prone to oxidation than unmodified rosin. The high acid functionality promotes specific adhesion to a variety of substrates.

An increased reactivity hybrid carboxy/ hydroxyl functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as a solution in water.

PUREsorb 292 is a liquid hindered amine light stabilizer developed especially for coatings. The almost pure mixture of Bis (1, 2, 2, 6, 6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate keeps the product liquid even at room temperature. The efficiency of PUREsorb 292 provides significantly extended lifetime to coatings by minimizing paint defects such as loss of gloss and cracking.

An increased reactivity amino functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as a solution in propylene glycol.

FloraRez® DR95 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with an elevated softening point while still maintaining the acid functionality of rosin. FloraRez® DR95 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to various substrates.

An amino functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as an aqueous solution.

An increased reactivity amino functional metal organic adhesion promoter synthesized with a stabilized MEA neutralized metal complex. The product is supplied as a solution in propylene glycol. The MEA level has been reduced, resulting in further enhancements in wet adhesion.

FloraRez® DR140 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with a high dimeric acid content and a very high softening point, while still maintaining the acid functionality of rosin. FloraRez® DR140 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to a wide range of substrates.

NEVCHEM® 140 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

CUMAR® 105 is a thermoplastic low molecular weight, hydrocarbon resin produced by catalytic polymerization of predominantly indene and other aromatic monomers.

LX®-1200-130 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

LX®-2600 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

NEVCHEM® 130 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

NEVCHEM®100 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

NEVCHEM® 220 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

NEVCHEM®250 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

Winlex 4100 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

NEVCHEM®150 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

NEVCHEM® 120 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

NEVCHEM®200 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

NEVPENE® 9511 is a thermoplastic low molecular weight, C5 modified C9 hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

CUMAR® 130 is a thermoplastic low molecular weight, hydrocarbon resin produced by catalytic polymerization of predominantly indene and other aromatic monomers.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

NEVPENE® 9510 is a thermoplastic low molecular weight, C5 modified C9 hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

NEVCHEM®240 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

NEVCHEM® 110 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.