Products in Construction Adhesives: Natural Rubbers (NR)

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

FloraRez® DR115 polymerized rosin is produced by the partial dimerization of gum rosin. This catalytic polymerization process results in an elevated softening point while maintaining the acid functionality of rosin. This resin is pale, thermoplastic, crystallization-resistant, and less prone to oxidation than unmodified rosin. The high acid functionality promotes specific adhesion to a variety of substrates.

FloraRez® DR95 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with an elevated softening point while still maintaining the acid functionality of rosin. FloraRez® DR95 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to various substrates.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

FloraRez® DR140 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with a high dimeric acid content and a very high softening point, while still maintaining the acid functionality of rosin. FloraRez® DR140 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to a wide range of substrates.

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

AQUATAC 6025 resin dispersion is a low softening point rosin ester waterborne tackifier for pressure sensitive adhesives. AQUATAC 6025 can be used with higher softening point waterborne tackifiers to improve low temperature adhesion.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L120 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

SYLVALITE RE 105L rosin ester is a pentaerythritol ester of rosin with a higher softening point than typical products of its type. It has been formulated to provide outstanding heat and aging stability. The stability, low volatility and polymer compatibility of this product make it useful in wide variety of adhesives and other applications where improved heat resistance and shear strength are required.

Polytrade CarboBinder is a powerful powdered thermoplastic natural resin with high tackiness for solvent-based automotive sealants and adhesives.Our product has excellent compatibility with nitryl rubber and antioxidant agents. CarboBinder is soluble in several solvents, such as acetone, ethyl alcohol, and ethyl acetate. Once solubilized and mixed into formulations, this thermoplastic resin has a high resistance to ethyl alcohol and gasoline, making it a raw material ideal for applications in the automotive industry.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L130 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

AQUATAC XR-4343 resin dispersion is a waterborne tackifier combining high solid content with high adhesion performance and stability at high speed. This product is especially designed to be formulated into pressure sensitive adhesives (PSA) where high shear strength is required together with high adhesion.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Shiraishi Kogyo Kaisha Hakuenka CC is our original Ultra-fine precipitated calcium carbonate coated with organic compounds. It was originally developed for reinforcing rubber materials in the early 20th century. Hakuenka CC has 50 nm uniformed ultra-fine particles as primary particle. These particles are surface treated with fatty acid in order to improve dispersion property at mixing stage with organic materials. Hakuenka CC is specially applied for construction application where Silicone & Polysulfide sealants are used. Hakuenka CC is commonly used as other application such as rubber, plastics and so forth.

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

Winlex 4100 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

CarboGasket Flake is a thermoplastic natural resin soluble in ethanol and has a high adhesive capacity for gasket sealant formulations. Our product is soluble in ethanol and due to its flaked form, has an easy solubility. CarboGasket Flake is also compatible with nitryl rubber, providing excellent balance and performance as a vehicle of metal to metal adhesion.

Kolon Industries HIKOREZ® A-1100S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking. .

V-TAC™ 7901 dispersion is an aqueous, 53% solids, solvent-free anionic hybrid dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, polychloroprene and natural rubber. V-TAC™ 7901 enhances adhesion and is especially recommended for acrylic latex systems. V-TAC™ 7901 offers an excellent balance of adhesion for polyolefin substrates and recycled corrugated.

SYLVARES TR 7115 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

Winlex 4115 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

V-TAC™ 8501

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

SYLVARES TR M1115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance. It has a narrower molecular weight distribution, which improves compatibility with some adhesive elastomers.