Products in Building & Construction: 1K (1 component) Coating

Tinuvin® 292is a liquid hindered amine light stabilizer (HALS) developed specifically for coatings. It comprises an almost pure mixture of two active ingredients, allowing it to remain in liquid form, unlike the tendency of pure diester to solidify, even at room temperature. The efficiency of Tinuvin 292 significantly prolongs the lifetime of coatings by reducing paint defects such as cracking and loss of gloss. Key features and benefits include versatility in both water and solvent based coatings, extension of coating lifetime, and excellent compatibility with a wide variety of coating systems.

WACKER® Polymer FD 120 is a colorless, clear, and odorless liquid that is not miscible with water. It serves as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and is suitable for applications in sealants and silicone sealants.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

WACKER® Polymer AL 60 is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 60 is used as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers. Applications include sealants, silicone sealants, and special raw materials for silicone sealant compounding.

WACKER® Polymer AL 110 is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 110 is used as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers. Applications include sealants and silicone sealants.

WACKER® Polymer AL 100 is a polydimethylsiloxane with dimethoxysilyl end groups. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 100 is used as a reactive polymer in formulations of moisture-reactive sealants and adhesives (RTV-1 silicones). Applications include sealants, silicone sealants, and special raw materials for silicone sealant compounding.

WACKER® Polymer AL 55 M is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear to slightly cloudy liquid that is immiscible with water. WACKER® Polymer AL 55 M is used as a raw material for the production of alkoxy crosslinking RTV-1 silicone rubbers.

EZ-Blox® optimizes the performance of alkyd-based paint and coating formulations by preventing surface skin formation due to contact with atmospheric oxygen when, between uses, such formulations sit in containers. EZ-Blox® is a breakthrough product that offers a safe, cost-effective replacement for MEKO, typically with equal efficacy and compatibility with other components in such formulations. With EU-REACH certification and low-toxicity, EZ-Blox® is ideal for paints and coatings producers looking to reformulate high-performance alkyd-based systems post ECHA’s reclassification of MEKO as a Carcinogen 1B substance on March 1, 2022.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.

Santicizer® Platinum P-1400 is a proprietary, non- phthalate plasticizer designed for use in multiple polymer systems and applications. This material can be used in polymers systems including PVC, latex, polyurethane, and polysulfide to name a few. Santicizer® Platinum P-1400 can be used in many applications including foams, sealants, calendering, plastisols, extrusion and films.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Santicizer® 160 is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer has compatibility in many polymer types, particularly in PVC. Santicizer® 160 can be used as a primary plasticizer or is often blended with general purpose plasticizers to offer faster fusion and better plasticizing efficiency. Together, these properties generate savings in faster production throughput, lower oven temperatures, and lower total plasticizer loadings. Santicizer® 160 is a well-recognized plasticizer utilized in many industrial PVC applications, processes like cleaning/purging, and as a carrier for biocides, pigments, and other additives.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5003 is oxide black colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5004 is oxide yellow colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5039 is white colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5023 is flame red colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5010 is violet colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5015 is blue PB 15:3 colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5202 is oxide black colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5006 is chrome green colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5009 is rose colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5005 is oxide red colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5007 is green colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5036 is black colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5012 is yellow colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5002 is ultramarine blue colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5011 is lemon yellow colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5013 is light-yellow colored.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5008 is red PR 254 colored.