Products in Building & Construction: 2K (2 component) Coating

Tinuvin® 292is a liquid hindered amine light stabilizer (HALS) developed specifically for coatings. It comprises an almost pure mixture of two active ingredients, allowing it to remain in liquid form, unlike the tendency of pure diester to solidify, even at room temperature. The efficiency of Tinuvin 292 significantly prolongs the lifetime of coatings by reducing paint defects such as cracking and loss of gloss. Key features and benefits include versatility in both water and solvent based coatings, extension of coating lifetime, and excellent compatibility with a wide variety of coating systems.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

Santicizer® Platinum P-1400 is a proprietary, non- phthalate plasticizer designed for use in multiple polymer systems and applications. This material can be used in polymers systems including PVC, latex, polyurethane, and polysulfide to name a few. Santicizer® Platinum P-1400 can be used in many applications including foams, sealants, calendering, plastisols, extrusion and films.

Santicizer® 160 is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer has compatibility in many polymer types, particularly in PVC. Santicizer® 160 can be used as a primary plasticizer or is often blended with general purpose plasticizers to offer faster fusion and better plasticizing efficiency. Together, these properties generate savings in faster production throughput, lower oven temperatures, and lower total plasticizer loadings. Santicizer® 160 is a well-recognized plasticizer utilized in many industrial PVC applications, processes like cleaning/purging, and as a carrier for biocides, pigments, and other additives.

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

Defoamer for water-based coating systems, silicone free. SCHWEGO foam 8013 is a highly effective defoamer suitable for water- based systems and adhesives especially for those based on polyurethane and acrylate.

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

Velsiflex® 342 S is a blend of dipropylene glycol dibenzoate and other benzoate esters. It is a lower moisture / lower hydroxyl plasticizer. It has been widely used in 2K polyurethane systems to reduce cure interface, which also provides better rebound, improved tear strength and reduced swell with solvents. It is also used in many polysulfide sealant applications and has proven to be a very efficient ester from a softening agent perspective.

ZemaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Xylene, Toluene, Parachlorobenzotrifluoride (PCBTF/Oxsol 100®) and Tertiary Butyl Acetate (TBAc).

Bubbling. It’s a problem which pops up time and time again, particularly in areas subject to low temperature and high humidity levels. Fortunately, under these conditions, Aldirez A provides the ability to create primers that remain remarkably resilient and bubble-free. In addition to its exceptional ability to inhibit CO2 generation, formulators are able to accelerate the cure of PU primers, to improve turnaround efficiency, whilst retaining a workable pot life.

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

Super SAP® CLR/CLS is our flagship, high-performance, clear-coating epoxy system. A Super Sap® Formulation, the CLR system is a water-clear, UV-stabilized epoxy system for laminations and coatings that require a low-color, low-yellowing epoxy such as high-colorwork applications. This system features a quick air-release and world-class UV resistance package. CLR works with multiple hardeners to match your working parameters. It has an ideal viscosity for a wide range of applications that use hand layup techniques with fast, room-temperature cures.

Super SAP® CLR/CLF is our flagship, high-performance, clear-coating epoxy system. A Super Sap® Formulation, the CLR system is a water-clear, UV-stabilized epoxy system for laminations and coatings that require a low-color, low-yellowing epoxy such as high-colorwork applications. This system features a quick air-release and world-class UV resistance package. CLR works with multiple hardeners to match your working parameters. It has an ideal viscosity for a wide range of applications that use hand layup techniques with fast, room-temperature cures.

FASCAT® 4202 is a Yellow amber, oily liquid that is the industry standard for coatings, adhesives, solvents and elastomers (CASE) .

Soft binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings