Products in Sealants & Caulks: Solventborne Adhesive

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Reinste 259 is Used as a functional filler for onec omp o n e n t o r two - c omp o n e n t polyurethane adhesive and sealant.

Super NEVTAC®99 is a thermoplastic low molecular weight, aromatic modified C5 hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Polytrade CarboBinder is a powerful powdered thermoplastic natural resin with high tackiness for solvent-based automotive sealants and adhesives.Our product has excellent compatibility with nitryl rubber and antioxidant agents. CarboBinder is soluble in several solvents, such as acetone, ethyl alcohol, and ethyl acetate. Once solubilized and mixed into formulations, this thermoplastic resin has a high resistance to ethyl alcohol and gasoline, making it a raw material ideal for applications in the automotive industry.

Hot polymerized SBR 1012C elastomer is particularly useful as a binder for fibrous materials. It imparts increased cohesive strength when added to an adhesive mixture.

ZemaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Xylene, Toluene, Parachlorobenzotrifluoride (PCBTF/Oxsol 100®) and Tertiary Butyl Acetate (TBAc).

Super NEVTAC®90 is a thermoplastic low molecular weight, aromatic modified C5 hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

Rit-Chem PIB 6H is polyisobutylene. Possesses mid-range molecular weight. Used in hot melt and solvent-based adhesive and sealant applications.

Kolon Industries SUKOREZ® SU-100 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-100 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Hot polymerized SBR 1011AC elastomer is recommended for adhesive and pressure sensitive tape and label applications, and in mechanical rubber goods where non-staining and high tack is essential.

NEVTAC® LT is a highly aliphatic petroleum based liquid tackifying resin with a low softening point designed for low temperature applications. This hydrocarbon tackifer is stabilized with 0.1% antioxidant.

Intercorp Boron Silicate Hollow Glass Microspheres 25 is manufactured with applied coupling agents. T-Series has a general treatment.It can be used as Synthetic marble/Furniture (cast polyester),Insulation coating roller, Polyureathane injection etc.

Hot polymerized SBR 1013 elastomer is used in adhesives, tire liners, and mechanical rubber goods, including auto mounts and household products.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

Rit-Chem PIB 4H is polyisobutylene. Possesses low molecular weight. Used in hot melt and solvent-based adhesive and sealant applications.

Hot polymerized SBR 1011AE elastomer is recommended for adhesives, pressure sensitive tape and label, and mechanical rubber goods applications where nonstaining and high tack is essential.

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

CarboGasket is a powdered thermoplastic natural resin with high bonding capabilities for solvent-based gasket sealant formulations. Our product is soluable in acetone, ethyl alcohol and ethyl acetate, while being insoluable in petroleum ether and water. Also, CarboGasket has a high resistance to solvents, such as ethyl alcohol and gasoline, once solubilized and mixed into formulations.

SUSPENO 70 is a liquid flow control agent for use in the production stage or as a stir-in post addition to the finished product. It requires no predispension or activation and will correct sagging, running, dripping and curtaining of paints, or slumping in heavy bodied compounds. SUSPENO 70 has no effect on gloss, color, dry or cure time and flexibility. The prevention of sagging is readily demonstrated by testing wet films with the Leneta Sag Liner.

Hot polymerized SBR 1012 elastomer is particularly useful as a binder for fibrous materials. It imparts increased cohesive strength when added to an adhesive mixture.