Products in Sealants & Caulks: Pressure Sensitive Adhesive

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flyprene SIS 1209 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 29% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flyprene SIS 1124 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 14% and 25% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1126 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 16% and 50% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1105 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flyprene SIS 1106 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 15% and 17% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

FloraRez® DR115 polymerized rosin is produced by the partial dimerization of gum rosin. This catalytic polymerization process results in an elevated softening point while maintaining the acid functionality of rosin. This resin is pale, thermoplastic, crystallization-resistant, and less prone to oxidation than unmodified rosin. The high acid functionality promotes specific adhesion to a variety of substrates.

FloraRez® DR95 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with an elevated softening point while still maintaining the acid functionality of rosin. FloraRez® DR95 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to various substrates.

FloraRez® DR140 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with a high dimeric acid content and a very high softening point, while still maintaining the acid functionality of rosin. FloraRez® DR140 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to a wide range of substrates.

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Polybut™ X7 is a low molecular weight conventional polybutene.

Polybut 1800 is a low molecular Weight Conventional Polybutene

Polybut™ 4 is a low molecular weight conventional polybutene.

Asahi Kasei Tuftec™ H1221 is specially designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1221 ultra-finely dispersed into PP. PP and H1221 blends provide transparent PP sheets and films with excellent flexibility and resistance to hazing or whitening on bending. The excellent adhesion is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1221 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.

Polybut™ 0 is a low molecular weight conventional polybutene.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVARES TP 2019 terpene phenol is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This resin has a high terpene level, which exhibits excellent tackifying, flexibility, and compatibility properties for use in styrenic-block-co-polymer.

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

SYLVARES 1150 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin exhibits excellent compatibility and tackifying properties for use in styrenicblock-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

SYLVALITE 9000 resin is a biobased tackifier that combines differentiated adhesion with light color and advanced stability.

Resin Chemicals Terpene Phenolic Resin TP-P85 is obtained by copolymerization of the renewable material terpene monomer and phenol. By altering the phenol modification degree for each grade, we offer grades that are compatible with low to high polarity materials. Our grades improve the adhesion to difficult surfaces such as polyolefin resins..

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

AQUATAC 6025 resin dispersion is a low softening point rosin ester waterborne tackifier for pressure sensitive adhesives. AQUATAC 6025 can be used with higher softening point waterborne tackifiers to improve low temperature adhesion.

SYLVARES 540 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. The phenolic component improves compatibility with high polarity polymers. The low Tg of SYLVARES 540 resin improves elasticity at low temperature.

Polybut™ X10 is a low molecular weight conventional polybutene.

Polybut™ 30 is a low molecular weight conventional polybutene.

AQUATAC XR-4343 resin dispersion is a waterborne tackifier combining high solid content with high adhesion performance and stability at high speed. This product is especially designed to be formulated into pressure sensitive adhesives (PSA) where high shear strength is required together with high adhesion.

SYLVARES TR A25L polyterpene resin is a clear, light-colored, low molecular weight resin. This liquid resin may be used as a tackifier in a broad range of adhesive systems or as a modifying resin with other tackifiers to improve adhesion to hard-to-bond surfaces. SYLVARES TR A25L liquid polyterpene can also be used to improve low temperature properties.