Products in Adhesives & Sealants: Hot Melt Adhesive

Fujian Zhongde Energy Co-Solvent Polyamide Resin 3303 is a alcohol-soluble polyamide resin.

BONDiT™ C-52 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-52 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is especially useful as a primer and adhesion promoter for injection molding to metal and glass with polyethylene, polypropylene and polyolefins in general, PPS, PVC, PBT, ABS, polysulfone, polystyrene, polyamide (nylon 6 and 66), polyamide-imide, polyimide, polyvinylbutyral, melamine, polycarbonate, polyester, polyether, phenolic, and epoxy, with molding temperatures up to 328°C/622°F.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

King Honor International KH FT WAX 80 is the medium-melt Fischer-Tropsch synthetic wax. It is specially designed to meet the above two requirements by adhesives producers. It has narrow melt range and the high onset of melt, which can balance strength and flexibility, performing excellently in hot melt adhesives.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

Polybut™ 28 is a low molecular weight conventional polybutene.

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Bondthane™ UD-301 is a soft and non-tacky with excellent adhesion to a variety of substrates for both coating and adhesive.

Calprene 500 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure.This product is presented in porous pellets and has excellent optical properties due to its clarity.It is stabilized with a non staining antioxidant system FDA approved for use in food contact applications and is essentially gel free with a very clear color.C-500 is used in adhesive formulation, in thermoplastic injected shoe sole formulations, and transparent compounds.

Polybut™ 9 is a low molecular weight conventional polybutene.

SCG Chemicals LP1040P is a refined polyethylene homopolymer wax which is derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40P is guaranteed its high quality for various applications.

Coating P. Materials CX-6038 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Asahi Kasei Tuftec™ H1521 is particularly designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1521 super-finely dispersed into PP. PP and H1521 blends provides transparent and flexible extruded products such as sheets, films and tubes. The blends are also applicable to injection molding due to its high MFR. It has excellent adhesion, which is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1521 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.

King Honor International KH Paraffin Wax 67H is made from the deep refinement. Comparing the general fully refined paraffin wax, it has the more narrow carbon distribution. There is a more linear structure. That endows it with many good characteristics while using in the high-grade hot melt adhesives. It has the fast setting time, good cohesive strength and has good compatibility with the major groups of polymers. This grade is specially produced for the customer who uses it in the hot melt for packages. And we could help the customer with a slight adjustment to fulfill their own production process.

Non-polar, low molecular Polyethylene wax

RELEASE K 20 DL is a release agent dissolved in toluene.

SYLVARES TP 2040HM tackifier is a high softening point thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

Fushun Huaxing Petroleum Chemical HX-C9 140 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

TRECORA POLYETHYLENE WAX – CHU561 is a High Density Polyethylene Wax suitable for use in general purpose Hot melt adhesives to reduce viscosity and control open and set time. It can be used in applications where penetration is not of paramount importance.

UNI-REZ 2671 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2671 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

Calprene 710 is a 70/30 linear structure butadiene/styrene thermoplastic copolymer, polymerized in solution.This product is presented in porous pellet form that allows rapid oil absorption.It is stabilized with a non-staining antioxidant system (free of TNPP), that is FDA approved for use in food contact applications. It is essentially gel free and very transparent.

TRECORA POLYETHYLENE WAX – CWP500 E is a High Density Polyethylene Wax intended for use in hot melt adhesive applications to reduce viscosity and control open and set times.

Rit-Chem BT95 is alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications.

Fujian Zhongde Energy Co-Solvent Polyamide Resin 3301 is a alcohol-soluble polyamide resin.

Deqing Jiyuan Synthetic Resin MP-955 Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

Calprene H6120 is a 68/32 ethylene-butylene/styrene thermo-plastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance. Calprene H6120 meets the requirements of the USP class VI plastic classification.This product is available in: - Calprene H6120 porous crumbs. - Calprene H6120 P powder form dusted WITH amorphous silica. - Calprene H6120 PH powder form WITHOUT any dusting agent.

Fischer Tropsch wax

DONGRAY® PE WAX 100A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Mangalam Organics Limited ESTER GUM (Penta) is an ester gum is produced by esterification of gum resin with Pentaerythritol.

LUBA-print® 154/C is a Wax dispersion / Wachsdispersion. It is also used as aqueous paint-systems, to improve slip and mar resistance. aqueous flexo printing inks to improve the rub resistance. Hot melts, to improve antiblocking properties.

C5 Petroleum Resin XD-1001J is a kind of light yellow granular thermoplastic solid resin. It is mainly made of carbon five fraction by-product of ethylene plant and specific modifiers as raw materials. Through special production process, under certain temperature and pressure Under the conditions, the low-molecular-weight polymer produced by the polymerization reaction has good compatibility with natural rubber (NR), synthetic rubber, styrene polymers (such as SIS, SBS, SEBS, EVA), etc. Tackifying resins (such as terpenes, rosin and their derivatives) are also compatible. It has good water resistance, insulation, thermal stability, light stability, chemical stability to acid and alkali, good adhesion and low thermal conductivity.

Kolon Industries SUKOREZ® SU-400 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-400 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Winlex 4115 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

Protex JH3100 C5 is a petroleum resins used for Hot Melt Road Marking, Printing Inks.