Products in Adhesives & Sealants: Curing Agent

Baxxodur® EC 310 is a curing agent with features like good adhesion, moisture resistance, toughness, high flexibility, peel strength, and temperature resistance. It finds applications in adhesives and sealants, automotive and transportation, and building and construction.

WACKER® Crosslinker V 58 is a hydrogenpolysiloxane that contains reactive Si-H groups. It offers excellent cure properties, allowing for low platinum concentration and low temperature cure. This crosslinker provides good release stability, ensuring consistent performance over time. It also demonstrates good anchorage, which may vary depending on the substrates used.

POLYTHICK SC-75 is a curing agent in a two-component type pressure-sensitive adhesive suitable for use in the production of paper, synthetic paper, polyester film self-adhesive labels and double-sided adhesive tapes. This product is applicable particularly to paper and synthetic paper labels used for frozen foods, due to its high adhesive strength and excellent tackiness even on wet surfaces and at low temperatures.

DYTEK® HMD (hexamethylene diamine) is a highly pure (>99.9%) aliphatic diamine. DYTEK® HMD is used in the production of Nylon polymers, isocyanates, polyamide resins and adhesives. Other applications include water treatment, UV stabilizers, scale and corrosion inhibitors, and petroleum additives. This product is available as an anhydrous that is solid at room temperature and can be shipped as a warm liquid or diluted aqueous solution.

DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

PEL-CAT™ 9666 Most delayed action trimerization catalyst, suitable for CASE Applications. When used as a co-catalyst, improves wet out and flow without significantly extending overall cure time.

PEL-CAT™ CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the opening of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines and amine adducts. PEL-CAT CA100 finds use in many applications including adhesives, casting and flooring. The low volatility of this product minimizes odors.

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

Kumho P&B Chemicals KCA 2300-X80 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

Curamine 30-887 is a non Toxic 30-850

Kumho P&B Chemicals KCA 2100 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

BlueSky Chemical D-92 Crosslinking Agent is a clear and almost colorless fluid with a typical smell (MEKO). It readily hydrolyzes upon contact with moisture.

EPOTUF® 37-640 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins.

Finomide 1125 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

Shepherd Technologies Activated Manganese Dioxide − Type W is a high manganese content with high surface area and high activity.

Drolite™ 9043 is a phenalkamine used as a curing agent for various Epoxy Resins. Specially for marine coatings and other industrial applications.

Technicure® 54 is commonly used as a cure accelerator in epoxy resin based formulations. Typical loading level as an accelerator is about 0.5 to 8 phr in a standard DGEBA type liquid epoxy resin EEW=190) based formulation.

Shandong Huijin Chemical T-62 is cardanol replace or part replace phenol, via mann nice reaction, modified EDA to create epoxy curing agent.

AFEX™ SB20C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

Curamine 30-100 is a standard semi-solid polyamide with maximum flexibility. [Solution grades available to ease handling].

LAPOX® AH-313 is a light-yellow aliphatic polyamine hardener suitable to cure epoxy resin at ambient temperature. When cured with epoxy resin it provides short pot life and faster cure speed. Due to very low viscosity and low dosage, it finds suitable for applications like adhesive, mortar and casting of small electrical components.

BRITOL 540 is used as Curing Agent For Epoxy Based Adhesives & Coatings.

LAPOX® AH-351 is modified aliphatic amine adduct having high functionality, capable to cure epoxy resin at ambient temperature. It provides faster reactivity and short pot life when reacted with epoxy resins. When cured with stoichiometric ratio with modified epoxy phenol novolac, it provides high thermal and mechanical properties coupled with high chemical resistance. It is suitable to formulate solvent free and high solid coatings for high chemical resistance coatings and floorings.

Shandong Huijin Chemical HJT-31B epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.

CURING AGENT CH is a liquid diisocyanate, designed to cross-link polyols (polyethers and polyesters), polyurethanes and elastomers (natural rubber, chloroprene, ...).

Curamine 30-509 is a conventional amido-amine with medium imidazoline content and moderate reactivity.

Kumho P&B Chemicals KCA 2230 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

WSCM-1100 has low viscosity, fast curing, low surface treatment requirements. The glass transition temperature is high, and the bonding strength is good.

AFEX™ CN20C is a base drying oil called as Canola having no double bond.

WSCM-1102 has low viscosity, excellent adhesion on untreated metal and concrete surfaces.

CURING AGENT W3 is a liquid polyisocyanate, emulsifiable in water. Acrylic and PU dispersion polymers can be efficiently cross-linked with this product.

Kumho P&B Chemicals KCA 2230-X70 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

KemaPox HF 022 is aliphatic amine curing agent-triethylenetetramine.

Kumho P&B Chemicals KCA 2400 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.