Products in Adhesives & Sealants: Monomer

PHOTOMER® 4006 TF (TMPTA) is a toluene free aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers

PL-3220 is a difunctional monomer providing a good balance of hydrophobicity and hydrophilicity.

Guangzhou Chemical Butyl Methacrylate can be used as comonomer of polymethyl methacrylat. The monomer polymer has higher adhesive bonding and well elasticity, can be used for making the transparent interlayer material of complex safety glass; the polymer or copolymer of butyl methacrylate can be used as insulating potting compound, photo negative anti-halation layer, underwater paint, saloon car coating, synthetical adhesive, oil additives, finishing agent for paper, leather and textile.

UVP 0102 99 is a clear liquid with low viscosity and good solvency.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

PL-3216A is a difunctional monomer providing water resistance and fast cure.

MERACRYL™ n-BMA is used to provide flexibility to polymers due to its softening temperatures of 20 °C.

PL-3116 is a monofunctional monomer providing good adhesion, high Tg, and low viscosity.

PHOTOMER® 4335 is a multifunctional monomer which contains a mixture of tri and tetra acrylate. It can be used in a variety of UV curable applications, where a high degree of cross linking is required.

Photomer® 4361 is an ethoxylated analog of 1,6-hexanediol diacrylate (Photomer® 4017). It is a very low irritation monomer which can be substituted for HDDA due to its comparable solvency characteristics. This monomer can be used as a high performance diluent in UV/EB energy curable coatings and inks.

CE CRYL 800T is a 80% Epoxy Acrylate Oligomer with 20% monomer (TPGDA) .

PL-3216 is a difunctional monomer providing water resistance and fast cure.

Photomer® 4135 is a low odor, low volatility mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UV- and EB curable applications and is particularly suited to use in coatings for optical media.

MM-304 is a liquid mono-functional methacrylate monomer. It has similar properties as Isobornyl Methacrylate (IBOMA) when polymerized but with lower weight loss on cure. It has a mild, pleasant odor. MM-304 has good resistance to hydrolysis.

PHOTOMER® 4356 is a tri-functional acrylated monomer which can be polymerised in the presence of free radicals. This monomer is typically designed for use in UV- and EB curable applications. PHOTOMER® 4356 offers high reactivity, high cross linking density and excellent scratch, abrasion water and chemical resistance and good heat resistance combined with low shrinkage properties and none yellowing properties

MERACRYL™ i-BMA provides flexibility due to its softening temperatures of 50 °C.

PHOTOMER® 4142 (THFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UVand EB curable applications. Photomer 4142 offers good flexibility and toughness, low Tg and excellent solvency.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

Bisomer® IDMA (Isodecyl Methacrylate).

Bisomer® MPEG550MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

PHOTOMER® 2317 is a Hydroxypropyl Methacrylate (HPMA) which provides important properties to polymer products including hydrophilicity, improved adhesion to substrates, and crosslinking sites.

PHOTOMER® 4006 (TMPTA) is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers.

Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses.

Designer Molecules CS-697 is a polyglycidyl ether cyclosiloxane monomer. The structure above shows a representation of the predominant component. Low viscosity and low color make it ideal for formulating adhesives. This resin is very compatible with most organic resins.

Bisomer® MPEG350MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

Basis® F15 has Adipic Acid base used as adhesives, PU coatings, PU shoe soles, elastomers, PU flexible foam.

Purol® R-04 has phthalic anhydride base used as an adhesive, PU coatings, PU rigid foam, Elastomers.

PL-3203 is a difunctional monomer providing good flexibility and is water soluble.

Bisomer® LMA97 SP is a hydrophobic methacrylate monomer.

MM-204 is a mono-functional acrylate monomer. It has low shrinkage and a high glass transition temperature upon cure. The secondary ester linkage is resistant to hydrolysis.

Purol® R-08 has Phthalic Andydride base used as adhesives, PUR hot melts, PU coatings, PU rigid foam, Elastomers.

PL-3110 is a monofunctional monomer providing good adhesion and low viscosity.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 4211 is a highly reactive monofunctional acrylate monomer, it can be used as a low viscosity diluent for ultraviolet radiation cured systems.