Products in Adhesives & Sealants: Vinyls, Vinylics & Vinyl Derivatives

VINNAPAS® CA 5588 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity—a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents of 80 percent or even greater. VINNAPAS® CA 5588 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® eco CA 5880 is a sustainable solution that promotes the conservation of fossil resources by enabling the substitution of fossil-based raw materials with certified sustainable renewable feedstock. This substitution process adheres to the REDcert² mass balance approach and is independently audited by a third party. The precise amount of fossil raw material replaced varies depending on the specific product version and is documented in the corresponding certificate.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

VINNAPAS® eco CA 55 is an environmentally conscious product that helps conserve fossil resources. When purchasing this product, it is possible to replace up to 100% of the fossil-based raw materials used in its manufacturing with sustainably certified renewable feedstock. This substitution process follows the REDcert² mass balance approach, which is audited by TÜV Nord. The specific amount of fossil raw material replaced depends on the chosen product version and is specified in the REDcert² certificate.

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

VINNAPAS® EF 575 is a carboxylated vinyl acetate-ethylene copolymer dispersion stabilized with surfactants. It has a glass transition temperature (Tg) of 0 °C and serves as a versatile binder suitable for various applications, including caulks, sealants, and mastics. This product exhibits excellent adhesion to aluminum, galvanized and stainless steel, wood, FRP, and PVC substrates. Furthermore, VINNAPAS® EF 575 is manufactured without the use of alkylphenol ethoxylate (APEO) surfactants or defoamers.

Evonik VQM 909 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

Evonik VQM 907 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

Evonik VQM 973 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

VINNAPAS® UW 10 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless. Typical applications for VINNAPAS® UW 10 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® eco 7220 E is a versatile dispersible polymer powder designed for dry mix mortars, with a specific focus on tile adhesives and tile grouts. This product is based on a flexible copolymer of vinyl acetate, ethylene, and methyl methacrylate, belonging to the VINNAPAS® E product class. As a member of this class, it offers enhanced properties such as excellent adhesion even after water immersion and flexibility.

VINNAPAS® eco 8620 E is a versatile dispersible polymer powder designed for dry-mix mortars, with a specific focus on tile adhesives. This product is based on a flexible copolymer of vinyl acetate, ethylene, and vinyl chloride and belongs to the VINNAPAS® E product class. As a member of this class, it offers enhanced properties such as extended open time and excellent adhesion even after water immersion.

VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNOL® E 22/48 A is a copolymer composed of approximately 75 wt.% vinyl chloride (VC) and 25 wt.% carbon acid esters with hydroxyl functionality. It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® E 22/48 A undergoes film formation as the solvent within the formulation evaporates.

VINNAPAS® EF 8860 is an aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene. This dispersion is specifically formulated to be plasticizer-free. VINNAPAS® EF 8860 demonstrates excellent cohesion and adhesion properties, even at elevated temperatures. It offers good adhesion to plastic floor coverings and exhibits high resistance to plasticizer migration. Additionally, this dispersion provides high heat resistance.

VINNAPAS® eco 4023 N is a versatile dispersible polymer powder designed for dry-mix mortars. It is particularly suitable for applications such as tile adhesives, ETICS (External Thermal Insulation Composite Systems), and self-leveling compounds. This product is based on a flexible copolymer of vinyl acetate and ethylene, belonging to the VINNAPAS® N product class. As a member of this class, it has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, allowing for a wide range of formulation possibilities.

VINNAPAS® UW 25 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless and finds application in building and construction adhesives, as well as resin modification for composites. The product is available in the form of solid, colorless beads that are odorless and tasteless.

VINNAPAS® eco 8118 E is a versatile dispersible polymer powder designed for dry mix mortars, particularly suitable for tile adhesives. This product is based on a flexible terpolymer of vinyl acetate, ethylene, and vinyl chloride, belonging to the VINNAPAS® E product class. As a member of this class, it has a neutral impact on rheology and offers extended open time, along with very high adhesion after water immersion and heat storage. These properties provide a high level of formulation flexibility.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

Crestafix® 630PA is a pre-accelerated vinyl ester-based high-performance bonding paste. This product is a non-sagging, filled compound with high strength, specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, internal core materials, and composite constructions. This product provides high shear strength bonded joints without the need for mechanical fixings.

Rovene 6091 is a functionally modified vinyl acetate copolymer latex recommended for use as a water-based release coating. As a water based release coating, Rovene 6091 is recommended for use with adhesives exhibiting a high degree of tack. Rovene 6091 is recommended as a blending component for Rovene 6090 to modify the degree of adhesive release. This fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with easy release. Features: Firm hand High riding Fast drying Low TMLI release values (easy release) Excellent mechanical stability

Rovene 6090 is a functionally modified, water-based vinyl acetate copolymer latex. As a water-based release coating, Rovene 6090 is recommended as a blending component for Rovene 6091 to modify the degree of adhesive release. On its own, this fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with very tight release values. When combined with Rovene 6091, release values can be easily tailored to specific needs. Features: Firm hand High riding Fast drying High TMLI release values (tight release) Excellent mechanical stability

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® VDM 500 Polymers are vinylmethyldimethyl polysiloxane copolymers that are also vinylterminated. The products have pendant vinyl groups along the polymer backbone to enhance the crosslink density of the cured RTV (Room Temperature Vulcanization).

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Ultiloc 5003 has proven to be one of the more popular and interesting products in the Ultiloc series. It exhibits enhanced adhesion characteristics to many substrates including corona treated BOPP and BOPET, and is often used in flexible packaging film, contributing to a reduction in layers and decreased gage weight. Ultiloc 5003 also has well established superior gas barrier performance allowing it to be considered an acceptable replacement for alternative barrier technologies.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® VQM Products are additives for the improvement of mechanical properties of addition cured silicone elastomers. The curing mechanism of vinyl-functional silicone polymers (Andisil® VS) is a platinum catalyzed addition reaction with silicone crosslinkers containing silicon-hydride groups. The mechanical properties of the unfilled RTV are rather poor. Therefore the properties are improved with the addition of appropriate fillers i. e. Carbon black, fumed or precipitated silica and other fillers well known to formulators with expertise in compounding silicones. Andisil® VQM Products are comprised of vinyl-functional silicone polymers and vinyl-functional QM-resins. The product group is beneficial in formulating filler free, transparent systems which require good mechanical properties. The products will also enhance improvement of mechanical properties of filled formulations.

Andisil® 158 Silane is a high performing crosslinker for one component moisture cure RTV silicones. Its relatively low MW can reduce the total crosslinker requirement by ~25% as compared to an oxime crosslinker. Silanes are used in a variety of industrial applications.Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.