Products in Adhesives & Sealants: Powder Coating

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

MPI Chemie UV-234 (900) is a high molecular weight ultraviolet light absorber (UVA) of the hydroxyphenyl benzotriazole class, imparting good light stability to a variety of polymers.

Hubercarb® G6 is a high purity, fine ground calcium carbonate produced from a high brightness marble deposit in Georgia for applications that require high brightness or pure tints. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, PVC compounds, rubber and plastics.

HisarCal® Ex-5 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

HITOX® STD is a unique color pigment. It is a high quality, cost effective beige colored Rutile titanium dioxide. HITOX® will reduce the amount of expensive organic and inorganic pigments as well as replace some of the expensive white titanium dioxide in selected formulations. It is commonly used in paints and coatings (architectural, industrial, metal finishes, powder coating, coil backers, primers, wood coatings and other types of solvent and water base paint), caulks, sealants, floor tiles, PVC and other plastics.

MicroDyne™ 50 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

FASCAT® 4101 is a amorphous white solid used in the synthesis of saturated polyester resins for powder coatings.

Nordkalk ENRICH C 50 is an ultrafine precipitated calcium carbonate (PCC) product created to replace titanium dioxide and binder in paints and coatings. The multi-functional product innovation of Nordkalk Enrich has increasingly generated greater attention across the market, creating value in various fields of application in paints & coatings, adhesives, paper, inks and building materials.

Zeeospheres Ceramics G-200PC is unique gray-colored, fine particle size, high-strength microspheres. They are opaque to visible light, but transparent to UV light. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness, and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to their low resin demand, high hardness and inert chemistry, these products have found utility in high solids, water reducible radiation - curbale and high durability coatings, powder coatings, and a wide range of premium performance coatings.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

CoatOSil™ 7605 coatings additive has been shown to provide these same performance enhancements to powder coating formulations. Unlike most others in the CoatOSil™ line of additives, it is the waxy solid nature of CoatOSil™ 7605 coatings additive that can allow it be incorporated into powder coating formulations.

Hubercarb® M4 is a fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M4 to be used in a wide range of applications including paints, coatings, PVC compounds, caulks, silicone rubbers, and plastics.

JSC SUMYKHIMPROM Titanium Dioxide Sumtitan R-2041 is characterized by improved dispersibility, high optic characteristics and increased atmospheric resistance. Is recommended to be applied in high quality organo-soluble and water-dispersed paints, primers, linoleum, white cement, sealants, adhesives, beddings, putties, silicate paints, finishing mortars (incl. cement mortars), powder coatings, epoxy coatings, road marking paints, high-solid paints, printing inks, floor coatings.

Hubercarb® Q6 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

MicroDyne™ 180 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

TECHNIREZ® RME-912 is a solid adduct of a “4” type solid diglycidyl ether of bisphenol-A epoxy resin and a carboxyl terminated butadiene acrylonitrile elastomer. RME-912 is epoxy functional and therefore compatible with all epoxy resins. The product offers low temperature melting and high elastomer content. RME-912 is easily dissolved in a variety of solvents such as MEK, toluene and xylene. Due to its high elastomeric content, significant improvements in impact resistance, thermal shock resistance and fatigue resistance may be seen when used alone or in combination with other epoxy resins. The product is offered as a coarse pellet or as a fine ground (180 micron) powder or as superfine 74 micron grade.

Omnicat 270 is a photo initiator recommended for the cationic polymerization of formulations based on epoxies or oxetane. Omnicat 270 is a solid of a high-molecular-weight sulfonium salt free of heavy metals. Omnicat 270 develops very low odor during and after curing and shows very low migration properties which makes the product especially suitable for food packaging applications.

HALTEX® 304 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

INHIBISPHERES® M is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® M is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® M is metal-free. Low levels of INHIBISPHERES® M give superior performance when compared to traditional corrosion inhibitors on steel.

Razeen® SR 5072 is a solid unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution.

Deolink Epoxy TE / TE 50 DL are 50% preparations of [3-(2,3-epoxypropoxy)propyl] triethoxysilane, widely compatible with reactive resins such as epoxy, acrylics, polyurethane as well as thermoplastic resins such as polyester or polyamide. Deolink Epoxy TE / TE 50 DL offer improved adhesion to inorganic substrates, especially to glass. In mineral-filled systems, the coupling function of Deolink Epoxy TE / TE 50 DL leads to improved physical properties and better dispersion. Deolink Epoxy TE / TE 50 DL do not form toxic methoxyethanol and will not cause yellowing effects

Araldite® GT 7072 N is a solid unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution.

ASCOM 40 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

Nordkalk W400 is characterized by different particle sizes and low, medium or high aspect ratio (L/D). In addition, wollastonite products are available surface treated, e.g. in plastics to enhance dispersion in polymer resin. Due to its unique chemical composition, particle structure and high brightness, wollastonite offers many advantages for glazing and body formulations in ceramic applications. Wollastonite is used as a functional filler in paint & coating applications, where technical requirements are high.

Novamet Specialty Products 525 Conductive Nickel Powder 525B are a high purity filamentary powder made from the thermal decomposition of nickel carbonyl They are screened to remove large or agglomerated particles.

Zeeospheres Ceramics G-850 is unique gray-colored, fine particle size, high-strength microspheres. They are opaque to visible light, but transparent to UV light. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness, and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to their low resin demand, high hardness and inert chemistry, these products have found utility in high solids, water reducible radiation - curbale and high durability coatings, powder coatings, and a wide range of premium performance coatings.

FASCAT® 4202 is a Yellow amber, oily liquid that is the industry standard for coatings, adhesives, solvents and elastomers (CASE) .

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Alteo SH60 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

ASCOM 20 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.