Products in Adhesives & Sealants: Ethylene Vinyl Acetate (EVA)

Aquadhes® 6001 is a a water-based rosin ester dispersion and solvent free.

Puyang United Chemical C5 Petroleum Resin B-1200 is 100% C5 Aliphatic hydrocarbon resin. The key feature of B-1200 is lower softening point, excellent initial adhesive and holding power. The major usages of B-1200 are tackify a variety of adhesive polymers inclu ding natural rubber, synthetic polyisoprene, polyisobutylene, butyl rubber, AO,APAO, SIS and EVA.

Foreverest Resources Liquid Terpene Resin 31393 is polymerized by gum turpentine, which is a kind of excellent tackifier, with the characteristics including strong cohesive force, good aging resistance, heat resistance, radiation-proof, acid resistance, alkali resistance, odorless, nontoxic and excellent dielectric properties. It is designed to improve the initial viscosity of pressure sensitive tapes, and provide excellent compatibility and solubility in a wide range of applications which widely used for Pressure Sensitive Tapes, rubber, adhesive, hot melting coating, lacquer, superior printing ink, packing, anti-rust oil and chewing gum, etc.

LESTAC P110 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Winlex 4100 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

SCG Chemicals LP1040T is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40T is guaranteed its high quality for various applications.

TRIOBAN PC DKW is a blend of hydrocarbons with fatty acid esters.

Construction film black masterbatch is designed specially for geomembranes, drip irrigation tapes and PE pipes. Construction film black masterbatch is designed specially for geomembranes, drip irrigation tapes and PE pipes. It adopts imported carbon black with excellent blackness and brightness, composite antioxidant, UV absorber, and light stabilizer. It prolongs the service life of products.

Resin Chemicals Terpene Resin TP85 is a pale yellow transparent solid, and it is made from α-Pinene and aluminum trichloride. It has good compatibility with thermoplastic elastmomer SIS, SBS, SEBS, Natural Rubber and EVA..

LESTAC P120 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Bitoner Resin TR-120 include C5 modified C9 resin and C9 modified C5 resin.

LESTAC C100 is pale yellow color, thermal or catalysis-copolymerization process, thermoplastic resin,obtained from mainly thermal polymerizing unsaturated aliphatic diolefins and aromatic coumarone, indene derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for Paint, Printing Ink, Rubber Compound, tire, water repellent agent, concrete curing agent and binder for asphalt, etc.

Pine Rosins PR 510.3 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

TERGUM 100 is a stabilized pentaerythritol esterified rosin in flakes.

Fushun Huaxing Petroleum Chemical HX-1690S is aromatic modified aliphatic hydrocarbon resin. HX1690S is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It is primarily designed tackification of styrene-isoprene-styrene (SIS) block copolymers, but also has utility in natural rubber, poly-isobutylene, butyl rubber, EVA, APP and APAP. It is suggested as tackifying resin for high quality hot melt and hot melt pressure sensitive adhesives.

Novotrade Invest AS HCR-135V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

SCG Chemicals WD2110P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Aquadhes® 6102 is a a water-based rosin ester dispersion and solvent free.

FlameGard™ is a ground Bayer hydrated alumina designed for specific application in polymeric adhesive backing of tufted carpeting to provide a level of flame retardancy to the carpet system. It is specially ground to maintain relatively coarse particle distributions in the median range of 22 to 26 microns and provides a high loading potential in high viscosity backing compounds. FlameGard ATH has a slight off-white or ivory color that is acceptable in most applications.

Pine Rosins PR 097.1 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Novotrade Invest AS HCR-105A is a solid polymer with fractional composition up to 3 mm.It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It also has a good adhesive properties, tackifying characteristics and heat stability.

Novotrade Invest AS HCR- 95A is a solid polymer with fractional composition up to 3 mm.It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It also has a good adhesive properties, tackifying characteristics and heat stability.

HIGREE™ HB1310 is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It is primarily designed tackification of styrene-isoprene-styrene(SIS)block copolymers, but also has utility in natural rubber, polyisobutylene, butyl rubber, EVA, APP and APAP. It is suggested as tackifying resin for high quality hotmelt and hotmelt pressure sensitive adhesives.

Pine Rosins PR 097.43 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

HIGREE™ CL6200 hydrocarbon resin premium aliphatic hydrocarbon resin which is designed to takcify a variety of adhesive polymers including EVA, APP, APAO,NR ,SIS block copolymers and Butyl rubber. It could be used for EVA hotmelt adhesives, hot melt PSA and other adhesives products.

EVERNOX-B310 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

LESTAC P130 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

West Tech Chemical Ltd WR 1095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

Aquadhes® 6101 is a a water-based rosin acid dispersion and solvent free.

LESTAC RT100 is pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated aliphatic 1,3-pentadiene (1,3-piperlene) and some monomers derived from the process of thermal cracking of naphtha. The major usages are the binder for rubber compounding and tire,shoes,straps,etc, also can be tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength.

Foreverest Resources Hydrogenated C5 Hydrocarbon Resin H51000 is water white thermoplastic hydrocarbon resin obtained from polymerizing of C5 and Hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure senstitive adhesive (HMPSA) because of the good heat resistance and good compatibility with base polymers, such as EVA, SIS.

Novotrade Invest AS HCR-135AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Pine Rosins PR 097.2 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

The styrene modified C5 resin HC5090 is a thermoplastic hydrocarbon resin. The hydrocarbon resin has a low molecular weight, low odor. Styrene modified C5 resin has better viscosity and good solubility with different materials. It has lower softening point and lower the polar of the C5 Resin.

Niknam Chemicals Zinc Hydroxystannate has excellent flame retardant and smoke suppression properties of ZHS. Further, this can be used in Flame Retardant Low Smoke (FRLS) & Halogen-Free Flame Retardant (HFFR).

West Tech Chemical Ltd WR 3095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.