Products in Adhesives & Sealants: Styrene Isoprene Styrene (SIS)

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Dragonox® 1726 is an effective thermo-oxidative stabilizer for adhesive materials. It is also suitable for SBS/SIS block copolymers and polyurethane sealants.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

Teckrez® C95-99L is an aromatic (C9) based resins with aliphatic (C5) modification to provide cost effective performance in EVA hot melts and other applications.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

FloraRez® G85 is the glycerol ester of gum rosin, which is also known as ester gum. It is a pale-colored thermoplastic resin that has a low odor and low acid number. FloraRez® G85 is commonly used as a resin component in various adhesives, inks, coatings, and personal care compositions.

Deqing Jiyuan Synthetic Resin MP-110 Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

Resin Chemicals Rosin Ester GE85 is the solid with slight yellow of transparent flakes or beads, which esterified by gum rosin and glycerol or pentaerythritol, GE Series is glycerol ester of gum rosin, and PE Series is pentaerythritol ester of gum rosin. It has good compatibility with EVA, SIS, SBS, NR, CR, SBR, waxes, ketones and chlorinated solvents. It is soluble in aromatic and aliphatic hydrocarbon solvents esters, ketones and chlorinated solvents..

Puyang United Chemical C5 Petroleum Resin UCA100 hydrocarbon resin is an aliphatic tackifier resins with an excellent compatibility with SIS, SIBS, and SBS block copolymers, EVA copolymers and nature rubber.

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

HIGREE™ HB1300 is thermoplastic, low molecular weight and narrow molecular weight distribution, slightly yellow C5 resin with slightly C9 modified. It is characterized by its excellent compability with SBS,EVA and SIS ,and is suggested as tackifying resin for high quality hotmelt and hotmelt pressure sensitive adhesives.

Winlex 4115 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

Bitoner Resin C-2130 include C5 modified C9 resin and C9 modified C5 resin.

Bitoner Resin BT-1200 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Pine Rosins PR 509.1 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Guangxi Zhongchang Resin RA90 resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance. Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

C5 Petroleum Resin XD-1001J is a kind of light yellow granular thermoplastic solid resin. It is mainly made of carbon five fraction by-product of ethylene plant and specific modifiers as raw materials. Through special production process, under certain temperature and pressure Under the conditions, the low-molecular-weight polymer produced by the polymerization reaction has good compatibility with natural rubber (NR), synthetic rubber, styrene polymers (such as SIS, SBS, SEBS, EVA), etc. Tackifying resins (such as terpenes, rosin and their derivatives) are also compatible. It has good water resistance, insulation, thermal stability, light stability, chemical stability to acid and alkali, good adhesion and low thermal conductivity.

Pine Rosins PR 510.1 is a disproportionated gum rosin is a thermoplastic resin obtained by distillation of pine oleoresin–steam and modified by action of heat and catalysts to decrease the abietic acid content present in the natural Gum rosin. These resins are compatible with most well known compounds such as, EVA polymers, SIS, SBR, natural rubber, butyl rubber, hydrocarbon and terpene resins.

Bitoner Resin BT-1115 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Deqing Jiyuan Synthetic Resin MP-955 Rosin pentaerythrite resin are irregular transparent solid made from gum rosin esterified by pentaerythrite.

Puyang United Chemical C5 Petroleum Resin O-1102 is pure C5 aliphatic hydrocarbon resin. It's designed for Solvent based pressure sensitive adhesive (SBPSA), especially for NR and lIR SBPSA. 0-1102 has lower crystallinity which can brings adhesive good flexibility and creep resistance. So it works as a good tackifier for packing ad hesive, carton sealing, shoes adhesive and mouse trap glue etc. 0-02 lower molecular weight distribution and good color make it can works in SIS based HMPSA. It also can replace part of hydrogenated hydrocarbon resin when production APAO and EVA hot melt adhesive. The lower crystallinity of O-1102 makes it can works as tackifier and softener for tire rubber etc rubber parts production.

Bitoner Resin TR-120 include C5 modified C9 resin and C9 modified C5 resin.

TERGUM 100 is a stabilized pentaerythritol esterified rosin in flakes.

TERGUM 120 is a stabilized pentaerythritol esterified rosin in flakes.

Fushun Huaxing Petroleum Chemical HX-1690A is C5 aliphatic hydrocarbon resin based on purified piperylene. HX1690A hydrocarbon resin is a low molecular weight, light color thermoplastic resin produced from aliphatic petroleum-derived monomers.It owns good balance of tack and cohesive properties ,excellent heat stability and wild compatibility.This grade is especially for EVA hot melt adhesive and SIS, SBS based pressure sensitive adhesive.

HIGREE™ HB1410 is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It could be used for SIS , NR , SBS basis PSA ,and also owns good compatibility with EVA , APAO etc .It is suggested as tackifier for high quality hotmelt and hotmelt pressure sensitive adhesives.