Products in Industrial & Assembly Adhesives: 1K (1 Component) Adhesive

GENIOSIL® XT 55 is a silane-terminated polymer suitable for use in moisture-curing formulations. It readily dissolves in standard organic solvents while being virtually insoluble in aqueous media. When used, it reacts slowly, releasing methanol and forming a resinous deposit. GENIOSIL® XT 55 finds applications in various fields such as assembly adhesives (including hybrids), building and construction adhesives, and industrial adhesives.

GENIOSIL® ZK 26 is a binder that utilizes a siloxane reinforced alpha-silane technology. It is specifically designed for coating and adhesive applications. Notably, its exceptional resistance to water provides opportunities for formulating plasticizer-free two-pack adhesives. GENIOSIL® ZK 26 is a silicone resin reinforced alpha silane-terminated polymer, suitable as a binder in moisture curing formulations.

GENIOSIL® XB 502 is a silane-terminated binder based on alpha-silane technology, specifically designed for formulating high-strength adhesives. It finds applications in various areas, including building and construction adhesives, do-it-yourself projects, and industrial adhesives. One of its specific uses is for wood-to-wood bonding.

LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether that is APEO- and TEA-free. After air-drying, coatings based on LIOPUR PKS 2845 form transparent films that are tacky at room temperature. Because of its film's flexibility at low temperatures, it is especially recommended for manufacturing contact adhesives with good peel strength. It has applications in industrial manufacturing, adhesives, sealant applications, construction adhesives, and other automotive applications.

SYNTHOLUX 197 PE is an aadiation-curing, low-viscosity polyester acrylate resin that is solvent-free. It is used in UV- and electron beam-curing primers and top coats for wood, paper, plastics, and printing inks. It has applications in construction adhesives, industrial adhesives and sealants, wood coatings, and finishes.

NYCOBOND XN-287 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a significantly lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

Coating P. Materials CX-6902 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

ELAPOL 11108 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

Resicure® EMI-24 is commonly used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Typical loading level as a sole curing agent is about 1-5 phr and as a dicy and anhydride cure accelerator is about 0.5 – 3.0 phr. Resicure EMI-24 LV is a lower viscosity version of Resicure EMI-24.

Coating P. Materials CX-6038K is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Coating P. Materials CX-6080 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

Coating P. Materials CX-6040 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Coating P. Materials CX-6038 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Coating P. Materials CX-6041 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

ELAPOL 11110 B by Elachem is a linear, saturated polyester polyol. It is manufactured with synthetic aromatic , aliphatic acid and diethylene glycol (DEG​).

ELAPOL 6520 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

ELAPOL 4010 A is a linear, saturated polyester polyol by Elachem. It contains aliphatic acid & diethylene glycol (DEG).

Radiation-curing, low-viscosity polyester acrylate resin, solvent-free.

Coating P. Materials CX-6029H is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

ELAPOL 11117 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

Solventfree Aqueous, Aliphatic polyurethane dispersion based on a polyether, APEO- and TEAfree

ELAPOL 6510 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

Coating P. Materials CX-6085 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.