Products in Industrial & Assembly Adhesives: Binder & Resin

UNI-REZ 2226 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Guangxi Zhongchang Resin RGM128 is a maleic modified glycerine ester of gum rosin. designed to provide aliphatic compatibility in ink or oil paint formulations. The good solubility makes it a good co-resin to adjust solubility parameters in a wide variety of lithographic ink and varnish applications. It is an excellent pigment wetting resin and is recommended for use in economical flushing varnishes for heatset and sheetfed flushes.

UNI-REZ™ thermoplastic polyamide adhesives resins bond to a variety of substrates. Kraton’s leading technology position enables a tailored combination of strength, flexibility, environmental resistances, adhesion and open times.

Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.

POLYTONE™ AP 132 is a non heat reactive thermoplastic unmodified phenol-formaldehyde resin designed to give a consistent performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, excellent chip and abrasion resistance when cross linked with a methylene donor.

PHOTOMER® 6630 is a di-functional aliphatic urethane acrylate oligomers.

PHOTOMER® 3052 is a high viscosity, non-volatile, difunctional acrylate ester derived from a modified epoxy acrylate blend. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

PHOTOMER® 5850 is an amine modified polyether acrylate used in UV/EB curable systems. The product exhibits a low viscosity. It gives a high crosslinking density with a high reactivity.

UNI-REZ™ 2502 is a thermoplastic polyamide resin. Used in high-gloss paints. Offers a high degree of thixotropy. Possesses very good flow and leveling characteristics.

UNI-REZ 2930 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2930 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

EST 5510 99 is a Glycerine ester of Gum Rosin.

Designer Molecules BMI-1500 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in many common solvents such as toluene, xylene, MIBK, etc. .

MOBECOL 503/45 is water-based Polyvinyl Acetate Homopolymer.

Designer Molecules BMI-1700 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in most aromatic and aliphatic solvents such as toluene, xylene, NMP, etc.

Foreverest Resources Glyceryl Rosinate (Industrial) G1004 is a Glycerol Ester of Gum Rosin, Ester Gum, GEGR. The Industry grade of Glyceryl Rosinate (a polyol ester of rosin), also called Glycerol Ester of Gum Rosin (GEGR), which is used for specialty industries of adhesives,coating and paints. It is also widely used in polymers including EVA, acrylics, polyurethanes, SIS and SBS.

Coating P. Materials CX-6029H is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

UNI-REZ 2248 polyamide resin is an alcohol soluble type resin for flexographic printing. It has high compatibility with nitrocellulose, excellent gel resistance, and excellent moisture tolerance.

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

FiberStar® P+ is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. FiberStar P+ is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. FiberStar P+ is an excellent product for binding and adhesive applications where economics is important. FiberStar P+ is a cost-effective corn-based product with excellent binding and adhesion properties.

UNI-REZ 2632 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2632 hot melt polyamide adhesive has excellent low temperature flexibility and adhesion to various plastic substrates. The low viscosity and moderate softening point allows for lower application temperatures when used with temperature sensitive substrates.

CarboGasket Flake is a thermoplastic natural resin soluble in ethanol and has a high adhesive capacity for gasket sealant formulations. Our product is soluble in ethanol and due to its flaked form, has an easy solubility. CarboGasket Flake is also compatible with nitryl rubber, providing excellent balance and performance as a vehicle of metal to metal adhesion.

Emulprene 1006CR is a crumb hot emulsion styrene-Butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent.

Coating P. Materials CX-6040 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

PHOTOMER® 6578 is a low viscosity tetra functional aromatic acrylate, which gives very good abrasion and scratch resistance in combination with high flexibility.

Hot polymerized SBR 1009 is recommended for use in calendared products such as slab soling for footwear, and in extruded mechanical goods where smoothness and controlled shrinkage are critical requirements. It is also widely used in sealants and adhesives.

Epilox A 19-04 is a low molecular weight bisphenol A epoxy resin with medium viscosity.

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

UNI-REZ 2532 (formerly UNI-REZ E3525) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2532 with the alkyd resin at temperatures between 210-230°C. UNI-REZ 2532 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy. UNI-REZ 2532 forms very strong and rigid thixotropic gels that are resistant to high levels of polar solvents.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Photomer® 3016-25G is a high viscosity, non-volatile, di functional acrylate ester derived from a low molecular weight aromatic epoxy resin. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

Guangxi Zhongchang Resin RPF100 series resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance.Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

Photomer 6024 is an aliphatic urethane diacrylate oligomer which exhibits, good flexibility, yellowing resistance and good UV/EB cure reactivity.

Omnivad 280 is a radically curable silicone acrylate utilized in a broad array of UV/EB curable coatings and printing inks. Omnivad 280 provides superior substrate wetting and surface slip by reducing the surface coefficient of friction. It enhances durable anti-mar and anti-blocking performance.

Daikalac 5040 is a solution type of synthetic resin obtained by the polymerization of monomers such as vinyl acetate, acrylic ester and styrene in the presence of a solvent such as ethyl acetate and methanol.

Essential Polymers R5034 is a very hard, high Tg acrylic emulsion polymer that can be formulated into DTM formulations, as well as, stain resistant waterborne wood sealer. Formulations based on R5034 will give excellent salt spray resistance properties. Also, when formulated into a wood sealer it exhibits excellent resistance properties to coffee, iodine, mustard, tea and many other staining agents.

Foreverest Resources Colorless Fully Hydrogenated Rosin 400 is refined from hydrogenated rosin or high-hydrogenated rosin that are eliminated foreign matter. With the benefit of colorless, is applied as solid or liquid solder flux, and the raw material of light-colored rosin resin and hot melt adhesives. It’s the substitue for Eastman® product.