Products in Industrial Manufacturing: Rheology Modifier

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

DeCAL 1201 is a powder-grade rheological control additive that can be used in a wide range of water-based systems. The product is designed to disperse and rapidly wet out in aqueous systems. Alternatively, the product can be incorporated into powder blends and formulations.

Kraton D1114 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied from North America in the physical form identified below. Kraton D1114 PT - supplied as a dusted dense pellet Kraton D1114 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1101 J is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from Japan in the physical form(s) identified below. Kraton D1101 JU - supplied as undusted crumb Kraton D1101 JO - supplied as crumb dusted with organic dusting agent Kraton D1101 JSM - supplied as powder dusted with amorphous silica Kraton D1101 J is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton D1126 P is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. In addition, it has a diblock content of 30% and high melt flow. It is supplied from North America in the physical form identified below. Kraton D1126 PT - supplied as a dusted dense pellet Kraton D1126 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1165 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1165 PT - supplied as a dusted dense pellet Kraton D1165 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D0246 E is a high vinyl, high diblock SBS polymer with bound styrene of 26% mass. The polymer contains uncoupled, dicoupled, and multi-coupled components. The major component is the uncoupled species. Kraton D0246 ET - supplied as a porous pellet dusted with talc Kraton D0246 E is used as a modifier of bitumen.

Kraton D1192 A is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 AT - supplied as porous pellets dusted with talc Kraton D1192 AS - supplied as porous pellets dusted with amorphous silica Kraton D1192 ASM - supplied as powder dusted with amorphous silica Kraton D1192 ATM - supplied as powder dusted with talc for the North American market Kraton D1192 A is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton D1164 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied from North America in the physical form identified below. Kraton D1164 PT - supplied as a dusted dense pellet Kraton D1164 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1111 KT - supplied as a dusted porous pellet Kraton D1111 KU - supplied as an undusted porous pellet Kraton D1111 KSM - supplied as a dusted powder Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton G1643 V is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is supplied from Taiwan in the physical form identified below. Kraton G1643 VS - is supplied as a dusted, dense pellet. Kraton G1643 V is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1161 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1161 JSP - supplied as dusted dense pellets Kraton D1161 JS - supplied as dusted crumb Kraton D1161 JU - supplied as undusted crumb Kraton D1161 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1152 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1152 ES - supplied as porous pellets dusted with amorphous silica Kraton D1152 ET - supplied as porous pellets dusted with talc Kraton D1152 ESM - supplied as powder dusted with amorphous silica Kraton D1152 E is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1162 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from North America in the physical form identified below. Kraton D1162 PT - supplied as a dusted dense pellet Kraton D1162 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton D1171 P is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied from North America in the form below. Kraton D1171 PT - supplied as a dusted dense pellet Kraton D1171 P can be used as a base material for hot melt adhesives. It may also find use as a base material for compound formulations and as a modifier for bitumen.

Omnivad Mirroflex SB 50 % is a product specifically designed for the Energy Curing coating and ink industry. This product can be used in many applications where high gloss and flexibility are required. Omnivad Mirroflex SB 50% is an outstanding coating modifier for clear and pigmented coatings.

Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton A1536 HU - supplied to customers as an undusted powder. Kraton A1536 HS - supplied to customers as a dusted powder Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

Kraton D-1161 polymer is a clear linear triblock copolymer based on styrene and isoprene, with bound styrene of 15% mass. Kraton D-1161 polymer is used in fomulating adhesives ,sealants and coatings, and may also be used as a modifier of bitumen.

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Omnivad SB Flakes is an organic filler. For absorbent substrates Omnivad SB Flakes can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate. This additive will help with enhancing higher gloss, increase color strength and improve cure. This Resin is compatible with radically curable inks, coatings and adhesives.

Kraton D1124 K is a clear, radial triblock copolymer based on styrene and isoprene, with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 KU - supplied as an undusted porous pellet Kraton D1124 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1116 A is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied from Europe in the physical form identified below. Kraton D1116 AT - supplied as a porous pellet dusted with talc Kraton D1116 ASM - supplied as a powder dusted with silica Kraton D1116 A IM - supplied as a powder dusted with inorganic dusting agents for supply to the North American market Kraton D1116 A is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.