Products in Other Adhesives & Sealants Applications: Radiation Curab...

VISIOMER® BDGMA (butyl diglycol methacrylate) is a monofunctional and label-free methacrylate monomer that contains ether functionality. It possesses a very low glass transition temperature (Tg), making it an excellent plasticizing monomer. This compound is utilized in the formulation of polymers, copolymers, and light-curing systems. Industries such as adhesives and sealants, coatings, and construction benefit from the versatile properties of VISIOMER® BDGMA.

VISIOMER® 1,6-HDDMA (1,6-hexanediol dimethacrylate) is a hydrophobic dimethacrylate monomer highly suitable as a crosslinker for reactive systems. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, as well as plastics and rubber.

VISIOMER® PEG 200 DMA (polyethylene glycol 200 dimethacrylate) is an aliphatic dimethacrylate monomer with low viscosity, making it an excellent choice as a co-monomer to enhance the mechanical properties and chemical resistance of resins. This label-free monomer finds applications in a variety of industries, including 3D printing, adhesives and sealants, coatings, composites, construction and, personal care.

VISIOMER® HEMATMDI (diurethane dimethacrylate) is a difunctional methacrylate monomer featuring a urethane group. It is characterized by its low volatility and high reactivity. This compound finds extensive use in radiation curing formulations for varnishes, inks, adhesives, as well as dental compounds. Industries such as 3D printing, adhesives and sealants, coatings, personal care, and healthcare benefit from its versatile properties.

Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240.The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. back

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

Spectra Group Limited H-Nu 535 initiates both free-radical and cationic photopolymerization, using a different set of co-initiators depending on the polymerization process • Type II photinitiator: H-Nu 535 acts as a light harvester, followed by energy or electron transfer to a co-initiator molecule; produced reactive species activate photopolymerization • Commercial photoinitiator, non-toxic (LD50>2500 mg/kg).

PL-7130 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7130 creates a flexible yet tough polymer with percent elongation near 80%. PL-7130 is non-yellowing and can be used in formulations to add flexibility.

PL-7003 is a low viscosity urethane that exhibits very fast cure speeds. Upon curing, PL-7003 exhibits excellent hardness and very low color. PL-7003 can be used in formulations to add strength.

Spectra Group Limited H-Nu 640MP can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 570 nm to 670 nm (λmax = 649nm in DMSO).

PL-7002 is a tetrafunctional polymethacrylate. This increased functionality results in faster cure speeds due to increased cross-linking capacity. Upon curing, PL-7002 exhibits very high Shore D hardness values. PL-7002 is non-yellowing and can be used in formulations to add strength.

Photomer® 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odor and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3°C.

MM-204 is a mono-functional acrylate monomer. It has low shrinkage and a high glass transition temperature upon cure. The secondary ester linkage is resistant to hydrolysis.

PL-7000 is a low viscosity urethane dimethacrylate. When cured, PL-7000 exhibits good hardness and strength. PL-7000 is low in color.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PL-7210 has a unique combination of high tensile strength and good elongation, which results in excellent toughness upon curing. PL-7210 is also very low color.

PL-7110 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7110 creates a tough polymer with percent elongation near 60%. PL-7110 is non-yellowing and can be used in formulations to add toughness.

PL-7121 is a novel low-shrink urethane monomer based on Esstech's proprietary methacrylate technology. PL-7121 possesses a volumetric shrinkage of 2.0 - 2.5% and conversion of 65 - 80% without filler. PL-7121 has very low color and can be added to formulations to add toughness. PL-7121 possess the excellent combination of superior elongation and strength.

PHOTOMER® 3016-25T is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

PL-7113 is a non-yellowing urethane that exhibits a high degree of elongation. It also has a high rate of conversion with low average shrinkage stress. PL-7113 can be added to formulations to add toughness.

PHOTOMER® 6210 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer with very low viscosity provides excellent light stability, chemical resistance, abrasion resistance and flexibility. The low viscosity of this urethane acrylate allows formulators wide formulating latitude, permits high oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastic and metal substrates.

Photomer® 4061 (TPGDA) is a difunctional acrylate of low viscosity, low odor and moderate skin irritancy. A reactive monomer with good cure response, it forms films that are flexible, hard and glossy. Photomer® 4061 exhibits good solvency and viscosity reducing characteristics with typical radiation curable oligomers and prepolymers.

PHOTOMER® 4149 TF is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257.Deuteron UV 2257 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 2257 is soluble in these binder systems including common solvents and reactive diluents. back

PL-7013 has a relatively low viscosity but upon curing exhibits high conversion and low shrinkage. It exhibits excellent flexibility once cured. PL-7013 is very low color.

Deuteron UV 1250 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250.Deuteron UV 1250 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 1250 is soluble in these binder systems including common solvents and reactive diluents. back

bossin® W-02 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

Spectra Group Limited H-Nu 780 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 650 nm to 810 nm (λmax = 791nm in DMSO).

PL-7021 has a unique structure which results in a flexible cured product. Adding PL-7021 to formulations has been shown to increase toughness.

PL-7011 exhibits excellent flexibility upon curing. It is a non-yellowing extended urethane dimethacrylate and can be used in formulations to add toughness.

Spectra Group Limited H-Nu 815 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 690 nm to 850 nm (λmax = 828nm in DMSO).

Photomer® 3016 is a high viscosity, non-volatile, di functional acrylate ester derived from a low molecular weight aromatic epoxy resin. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

MM-220 is a low viscosity mono-acrylate monomer. The polycyclic ring structure helps minimize shrinkage on cure. It also has low weight loss on cure.