Products in Other Adhesives & Sealants Applications: Monomer

Guangzhou Chemical MAA(Methacrylic Acid 99.5%) is formed via the acetone cyanohydrin (ACH) route to manufacturing MMA and is used in many applications, which include the production of speciality methacrylates for automotive coatings, in cement modifiers, NBR latex for disposable synthetic rubber gloves and in vinyl ester resins. MAA contributes a number of additional beneficial properties including surface adhesion, toughness and chemical resistance.

PL-3214C is a difunctional reactive monomer that provides excellent diluecy as well as water resist. and weathering prop.

MM-204 is a mono-functional acrylate monomer. It has low shrinkage and a high glass transition temperature upon cure. The secondary ester linkage is resistant to hydrolysis.

Guangzhou Chemical MAA(Methacrylic Acid 99.9%-Oxidation Route) is formed via the C4 Oxidation Route to manufacturing MMA and is used in many applications, which include the production of speciality methacrylates for automotive coatings, in cement modifiers, NBR latex for disposable synthetic rubber gloves and in vinyl ester resins. MAA contributes a number of additional beneficial properties including surface adhesion, toughness and chemical resistance.

Bisomer® LMA97 SP is a hydrophobic methacrylate monomer.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PL-3110 is a monofunctional monomer providing good adhesion and low viscosity.

PHOTOMER® 4399 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response together with good water and chemical resistance when formulated into UV/EB curable applications.

MM-220 is a low viscosity mono-acrylate monomer. The polycyclic ring structure helps minimize shrinkage on cure. It also has low weight loss on cure. 

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

Bisomer® S10W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

PL-3220 is a difunctional monomer providing a good balance of hydrophobicity and hydrophilicity.

Bisomer® LMA (Lauryl Methacrylate) is a hydrophobic methacrylate monomer.

PL-3100 is a monofunctional monomer with excellent hardness properties.

Bisomer® MPEG550MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

Bisomer® IDMA (Isodecyl Methacrylate).

PHOTOMER® 2317 is a Hydroxypropyl Methacrylate (HPMA) which provides important properties to polymer products including hydrophilicity, improved adhesion to substrates, and crosslinking sites.

PL-3203 is a difunctional monomer providing good flexibility and is water soluble.

Basis® F15 has Adipic Acid base used as adhesives, PU coatings, PU shoe soles, elastomers, PU flexible foam.

Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses.

Photomer® 4361 is an ethoxylated analog of 1,6-hexanediol diacrylate (Photomer® 4017). It is a very low irritation monomer which can be substituted for HDDA due to its comparable solvency characteristics. This monomer can be used as a high performance diluent in UV/EB energy curable coatings and inks.

Bisomer® MPEG350MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

Designer Molecules CS-697 is a polyglycidyl ether cyclosiloxane monomer. The structure above shows a representation of the predominant component. Low viscosity and low color make it ideal for formulating adhesives. This resin is very compatible with most organic resins.

Purol® R-04 has phthalic anhydride base used as an adhesive, PU coatings, PU rigid foam, Elastomers.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

PHOTOMER® 4142 (THFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UVand EB curable applications. Photomer 4142 offers good flexibility and toughness, low Tg and excellent solvency.

PHOTOMER® 4356 is a tri-functional acrylated monomer which can be polymerised in the presence of free radicals. This monomer is typically designed for use in UV- and EB curable applications. PHOTOMER® 4356 offers high reactivity, high cross linking density and excellent scratch, abrasion water and chemical resistance and good heat resistance combined with low shrinkage properties and none yellowing properties

Bisomer® PPA6 is a hydroxyl functional acrylate monomer.

PL-3216B is a difunctional monomer providing water resistance and fast cure.

Guangzhou Chemical Butyl Methacrylate can be used as comonomer of polymethyl methacrylat. The monomer polymer has higher adhesive bonding and well elasticity, can be used for making the transparent interlayer material of complex safety glass; the polymer or copolymer of butyl methacrylate can be used as insulating potting compound, photo negative anti-halation layer, underwater paint, saloon car coating, synthetical adhesive, oil additives, finishing agent for paper, leather and textile.

CE CRYL DPGDA is a Dipropylene Glycol Diacrylate Monomer.

Guangzhou Chemical HEMA(2-Hydroxy Ethyl Methacrylate) is mainly used for hot curing acrylic coating, UV-curable acrylic materials, photosensitive coating, water soluble plating coating, adhesive, textile treatment agent, ester polymer, modifier polymer, and stem acid water reducing agent, etc.

Purol® R-09 has Phthalic Andydride base used adhesives, PU coatings, PU rigid foam, Elastomers.

PHOTOMER® 4141 (CTFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. This Cyclic Trimethylolpropane Formal Acrylate (CTFA) is typically used in UV and EB curable applications. PHOTOMER® 4141 offers good solvency and very good adhesion properties on metals and plastics.

CE CRYL HDDA is a Hexane-diol Diacrylate Monomer.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.