Products in Other Adhesives & Sealants Applications: Release Agent

Marcus Oil and Chemical M200 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

RELEASE G 100 H is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. It can also be used with hot-melt pressure sensitive adhesives. The product is silicone-free.

Non-polar, low molecular Polyethylene wax

Non polar, low molecular Polyethylene wax

Silibase SR-6202S MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202S Liquid MQ Silicone Resin can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

RELEASE KB 100 A is a synthetic polymer with high molecular weight in a 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting point (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. It is not recommended for hot-melt pressure sensitive adhesives. The product does not contain silicone components.

RELEASE W 40 S is a water-based release agent based on synthetic SBR polymers added with releasing agents.

RELEASE W40 G2 is a water-borne release agent, based on acrylic polymers containing additional special releasing agents.

Marcus Oil and Chemical M300 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

RELEASE KB 100 is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. It is not recommended for hot-melt pressure sensitive adhesives. The product is silicone free.

RELEASE HT 100 is a synthetic polymer with high molecular weight in a 100% solid form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting point, coated with natural rubber, synthetic rubber and acrylic adhesives. RELEASE HT 100 is produced by a particular polimerization tecnique that avoids heavy metals catalysts. The product does not contain silicone compounds.

RELEASE K 100 DM is a synthetic polymer with high molecular weight in a 100% solid form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting point, coated with natural rubber, synthetic rubber or acrylic adhesives. It has a very good solubility in aromatic solvents (toluene, xylene). RELEASE K 100 DM is produced by a particular polymerization tecnique avoiding heavy metals catalysts. The product does not contain silicone compounds.

RELEASE KF 100 H is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. It can also be used with hot-melt pressure sensitive adhesives, if the chilling roll is well cooled. The product is silicone-free.

RELEASE W 40 HA8 is a water-borne release agent, based on synthetic acrylic polymers compouded with additives, capable to grant very high water repellency to the film.

Marcus Oil and Chemical M500 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

RELEASE W 40 GB4 LV is a waterborne release agent based on acrylic polymers added with special releasing agents.

RELEASE K 100 D is a synthetic polymer with high molecular weight in a 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting point (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. The product does not contain silicone components.

Silibase SR-6202P MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202P MQ Silicone Resin Powder can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

Silibase SR-6202N Liquid MQ Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. Since the introduction of the vinyl group imparts excellent hydrosilylation properties, it has excellent heat resistance, film formability, adhesion, water repellency, aging resistance, and ultraviolet radiation resistance. SilibaseSR-6202N VMQ Silicone Resin can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

RELEASE W 40 S2 is a water-based release agent based on synthetic polymers.

Deuteron ES 224 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in re­moving air-bubbles (for instance when mixing resin and curing agent). It improves wetting of the substrate in systems containing extenders.Because of the above mentioned properties Deuteron ES 224 is an excellent wetting and air release agent in particular for laminating resins based on unsaturated polyester. The product is very suitable in laminating resins where excellent adhesion of polyester resin and glass fiber is required. The product is particularly suitable for thixotropic systems since it has no impact on the rheology (thixotropy). back

RELEASE W 40 HS4 is a water-based release agent based on synthetic SBR polymers compouded with additives that impart a high water repellency.

RELEASE W 40 GB1 is a water-based release agent based on acrylic polymers added with special releasing agents.

RELEASE W 45 GB1 is a water-borne release agent based on acrylic polymers containing special releasing agents.

RELEASE W 40 GB6 LV is a waterborne release agent based on acrylic polymers added with special releasing agents.

VEGETABLE Ethylene-Bis-Stearamide wax (EBS)

RELEASE KF 100 is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. It can also be used with hot-melt pressure sensitive adhesives, if the chilling roll is well cooled. The product is silicone-free.

RELEASE W 40 GP1 is a water-borne product based on acrylic dispersions, modified with special additives and ink receptors.

CERETAN® T 91 is a Non micronized, high melting Fischer Tropsch wax. This Product can be used as lubricant and release agent.

Silibase SR-6201S MQ Methyl Silicone Resin is a very unique silicone high molecular polysiloxane compound with a tight spherical structure with a two-layer structure. It has excellent heat resistance, film formability, adhesion, water repellency, aging resistance and UV radiation resistance. SilibaseSR-6201S MQ Methyl Silicone Resin Liquid can be used as a tackifier for silicone pressure sensitive adhesives, architectural sealants, organic resin coatings, etc., mobile phone buttons, epoxy adhesive bonding, etc.

RELEASE W 40 GB1 LV is a water-based release agent based on acrylic polymers added with special releasing agents.

RELEASE S 100 is a PVSC (Polyvinyl stearyl carbamate), a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. New version with high purity, enhanced solubility and easier release effect. The product is silicone free.

Deuteron ES 222 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in re­moving air-bubbles. This applies in particular after mixing resin and curing agent. Technologically useful is the improved wetting of the substrate, thus making it easier to release air bubbles from the substrate’s surface.Because of the above mentioned properties Deuteron ES 222 is an effective wetting and air release agent in particular for laminating resins based on unsaturated polyester. The product is very suitable in laminating resins where excellent adhesion of polyester resins and glass fiber is required. Deuteron ES 222 is also very suitable as an air release agent in other systems based on unsaturated polyester resins. back

RELEASE KB 100 H is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber, acrylic and hot melt adhesives. The product is silicone free.

RELEASE K 100 DI is a synthetic polymer with high molecular weight in a 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting point (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. RELEASE K 100 DI is produced through a particular polymerization tecnique completely free of heavy metal catalysts. The product does not contain silicone components.