Products in Other Adhesives & Sealants Applications: Waxes

VEGETABLE Ethylene-Bis-Stearamide wax (EBS)

Water-borne emulsion of polar oxidized HDPE DEUREX® EO 45

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

DONGRAY® OPE WAX 600A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Fischer-Tropsch wax

Marcus Oil and Chemical M500 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

KELAILI® PE WAX KL-10 is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Fischer Tropsch wax

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

King Honor International KH FT WAX 105 use the feedstock from coal, They have the fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax 105 can reduce the dosage by about 15%-50% compared to paraffin wax and PE wax.

CERETAN® T 91 is a Non micronized, high melting Fischer Tropsch wax. This Product can be used as lubricant and release agent.

TRECORA POLYETHYLENE WAX – TRECOR HMA-1 is a High Density Polyethylene Wax with a narrow molecular weight distribution. It is designed for use in Hot melt adhesives intended for the packaging industry to provide heat resistance, reduce the viscosity of the HMA formulation, and also control open and set time.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

SCG Chemicals WD2110P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Wax granules and powders

Adiplast Wax AD-10 is polyethylene wax used in adhesive manufacturing.

DONGRAY® PE WAX 200A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

CERALENE® 1X is a low density polyethylene wax with a typical average molecular weight of 1200 MW.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

King Honor International KH FT WAX 120 is the coal-based Fischer-Tropsch wax. It has a higher melting point and the lower penetration. KH FT wax 120 is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of FT wax 120 can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

TRECORA POLYETHYLENE WAX – CHU610 is a High Density Polyethylene Wax. It is used in applications where a higher viscosity is desirable. Compared to other low density polyethylene waxes, the viscosity of Trecor CHU610 is still relatively low.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

IRM Scale waxes differ from their paraffin counterparts due to a lower degree of refinement resulting in a higher oil content of 1.5% - 5.0%. The greater oil content increases the ability to manipulate the wax compared to the harder and more brittle paraffin wax family - still scale waxes have a negligible tensile strength. Melting points are between 122 and 145°F (50 - 63°C). Scale waxes of 124 to 126°F melting point are used in the match industry. Scale waxes of higher melting point are used in kraft paper industry, e.g. builder's papers, cement bag stock, roofing felt, car liners, and heavy kraft wrappings. Scale waxes of low oil content are required in the manufacture of crayons. Scale waxes are also used as a blend or as alone in making candles.

DONGRAY® PE WAX 100A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Water-borne emulsion of polyethylene wax DEUREX® E 11 K

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less then 0.5% (0.8% for the high welted products) oil and have been hydro-treated or clay treated to remove impurities and decolorarion . The resulting waxes are water clear, odor free, and normally food grade. Semi refined paraffins contain between 0.5 and 1.5% oil. Below we give the usual melting point ranges of our fully and semi-refined paraffins. For other characteristics (penetration, color, viscosity) please call our sales staff to identify the best fit for your application.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.