Products in Other Adhesives & Sealants Applications: Epoxies (EP)

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

SB-632 is a ground high whiteness Alumina Trihydrate (ATH) flame retardant with an average median particle size of 3.5 microns.SB-632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of SB-632 provides a low-cost approach to flame retardant and smoke suppression in applications such as urethane foam, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS,polyolefins and XLPE.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

SB-332 ground ATH that provides low cost flame retardance and smoke suppression, and arc-track resistance. The medium-fine particle distribution yields desirable flow properties, good physical properties and suspension characteristics required in SMC/BMC compression molding and many rubber compounds. Applications utilizing SB-332 includes SMC/BMC electrical switch gear, appliance electrical sheet and office equipment housings along with epoxies, polishes, adhesives and coatings. A complete range of surface modifications is available to aid processing and enhance physical properties.These include silanes, stearates and wetting agents. .

Curamine 30-850 is a modified polyamide with moderate cure rate.

EPOXOL® EMS is a zero VOC functional modifier, reactive diluent, acid scavenger, chemical intermediate, and plasticizer. It exhibits high solvency strength, excellent viscosity reduction and plasticization properties. Epoxol® EMS is compatible with epoxies, polyurethanes, acrylics, alkyds, and a variety of other resins. It has epoxide functionality, very low color and odor, is non-yellowing, very hydrophobic, and does not contain halogens. Applications include Coatings, Sealants, Adhesives, Elastomers, Electronic Applications, Degreasers, PVC, Rubber and Lubricants. The high bio-derived content makes EPOXOL® EMS an excellent choice for renewable formulations.

Merginamid A 210/5 is a solvent-free, modified polyamine-adduct that is able to emulsify unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogeneous coatings with unobjectionable film properties are obtained.

Shandong Huijin Chemical T-60 is cardanol replace or part replace phenol, via mann nice reaction, modified EDA to create epoxy curing agent.

Curamine 30-508 is a conventional amido-amine with lowest imidazoline content and relatively short pot-life.

Designer Molecules BMI-1500 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in many common solvents such as toluene, xylene, MIBK, etc. .

Polyflo® 5 is a C11-C24 high flash aromatic naphtha solvent. The aromatic content of Polyflo 5 is typically min. 99%. The product has no detectable level of naphthalene at a detection limit of 500 ppm. Applications include refining, fuel, and lube additives, industrial cleaning, sealants, and as a processing fluid.

CreaFill Fibers Corp. Creamix and Createch provides industrial fillers capable of meeting all of a manufacturer’s requirements from lower cost functional fibers to very pure specialized powders. Cellulose fibers are not all the same; Some are superior. CreaMix and CreaTech outperforming the rest.

LAPOX® AH-315 is a long chain polyether amine having slow reactivity towards epoxy resin at ambient temperature. It is a clear colorless liquid with amine-like odor. It is miscible with water and soluble in many organic solvents. It provides long pot life and very low exotherm when cured with epoxy resins. Appropriately cured mass shows relatively high elongation, toughness, excellent resistance to impact and thermal shock resistance.

Merginamid A 154 is a solvent-free modified polyaminoamide-adduct dissolved in water. It emulsifies unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogenous films with unobjectionable coating properties are obtained.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

PL-TINP is a highly efficient hydroxyphenol benzotriazole ultraviolet light absorber (UVA).

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

PIQ-White Filler 300 is a fine sized dry pulverized carbonate filler. Material is available in 50 lb. paper bags, palletized and stretch wrapped, 2000 lb. mini bulk bags or in bulk. Piqua Minerals fillers are available with various average particle sizing for other filler applications.

BRASMIDE R 15 is a reactive polyamide resin with high viscosity.

Kanamoll is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

KİSAMİD® 1038 is a modified aliphatic polyamine with excellent resistance against water and chemicals such as inorganic acids. used for SF coatings, mortars, adhesives, laminates, castings.

NOFO 1032 is a blend of silicone and organic acid esters. Designed for use in most nonaqueous based coating systems, adhesives and inks. Allows for air release of high build epoxy, urethane, and various casting resins.

West System 407-B Low-Density, 14 lb is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty. It’s easy to sand or carve this putty once it has cured. The filler is reasonably strong on a strength-to-weight basis. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. The higher the percentage of 407 in your epoxy mix, the easier it will be to fair. Cures to a dark red/brown color.

Curamine 30-510 is a conventional amido-amine with medium imidazoline content and moderate reactivity.

AKTISIL PF 777 is a SILLITIN Z 86 coated with alkyle silane.

epamine pa41 is a fast curing, mainly used for epoxy - PU adhesives.

BRASMIDE R 25 is a reactive polyamide resin with medium viscosity

Curamine 30-697 is a modified polyamide with very high flexibility and toughness – high loading level.

Merginamid A 160 is a solvent-free modified polyaminoamide-adduct that is able to emulsify unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogenous films with unobjectionable coating properties are obtained.

Puyang Ruicheng Chemical DCPD petroleum resin RC-D120 is the pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated dicyclopentadiene derived from a special process, at a certain temperature and pressure, formed by the polymerization of low molecular weight polymer. D120 has a good compatibility with ester and polyurethane solvents. In the ester solvent, it has a good compatibility with epoxy resin, furthermore it has a good curing speed with epoxy resin .It can be used as the modifier for the marine paints and some other special paint as well as the shrinkage force to the cement and steel, furthermore, it also can strengthen the wetting property to paint and improve the leveling property of paint film.

Technirez® NC-36 is adduct of a semi-solid epoxy novolac resin and a carboxyl terminated butadiene acrylonitrile elastomer. NC-36 is used with epoxy resins to improve toughness, adhesion and fatigue resistance while maintaining thermal properties.

XYSIL® R120B is a fumed silica after treated with DDS(Dimethyldichlorosilane). It is based on a hydrophilic fumed silica with a specific surface area of 150m2/g.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.