Products in Other Adhesives & Sealants Applications: Radiation Curab...

VISIOMER® 1,6-HDDMA (1,6-hexanediol dimethacrylate) is a hydrophobic dimethacrylate monomer highly suitable as a crosslinker for reactive systems. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, as well as plastics and rubber.

VISIOMER® PEG 200 DMA (polyethylene glycol 200 dimethacrylate) is an aliphatic dimethacrylate monomer with low viscosity, making it an excellent choice as a co-monomer to enhance the mechanical properties and chemical resistance of resins. This label-free monomer finds applications in a variety of industries, including 3D printing, adhesives and sealants, coatings, composites, construction and, personal care.

VISIOMER® HEMATMDI (diurethane dimethacrylate) is a difunctional methacrylate monomer featuring a urethane group. It is characterized by its low volatility and high reactivity. This compound finds extensive use in radiation curing formulations for varnishes, inks, adhesives, as well as dental compounds. Industries such as 3D printing, adhesives and sealants, coatings, personal care, and healthcare benefit from its versatile properties.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

Spectra Group Limited H-Nu 535 initiates both free-radical and cationic photopolymerization, using a different set of co-initiators depending on the polymerization process • Type II photinitiator: H-Nu 535 acts as a light harvester, followed by energy or electron transfer to a co-initiator molecule; produced reactive species activate photopolymerization • Commercial photoinitiator, non-toxic (LD50>2500 mg/kg).

Spectra Group Limited H-Nu 640MP can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 570 nm to 670 nm (λmax = 649nm in DMSO).

Photomer® 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odor and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3°C.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 4173 is a proprietary UV/EB curable acrylate oligomer of low functionality and low viscosity. Designed primarily for use in etch-resist inks for printed circuit board manufacture, it can be readily formulated into a UV curable screen ink which exhibits good scratch resistance and improved stripping characteristics.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Nippon Carbide Industries Crossmer-U Has Fast UV curable property => No curing is required and can be immediately completed as a product.

PHOTOMER® 6210 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer with very low viscosity provides excellent light stability, chemical resistance, abrasion resistance and flexibility. The low viscosity of this urethane acrylate allows formulators wide formulating latitude, permits high oligomer content or lower formulation viscosities. Also this oligomer exhibits low odor, good cure speed and excellent adhesion to various plastic and metal substrates.

Photomer® 4061 (TPGDA) is a difunctional acrylate of low viscosity, low odor and moderate skin irritancy. A reactive monomer with good cure response, it forms films that are flexible, hard and glossy. Photomer® 4061 exhibits good solvency and viscosity reducing characteristics with typical radiation curable oligomers and prepolymers.

General Carbon Company Lampblack exhibit excellent resistance to degradation by UV light, acids, alkalis or organic solvents.

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

bossin® W-02 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic.

Omnimer ACMO is a low viscosity, monofunctional UV reactive diluent for UV and EB radiation curable formulations. The product exhibits of excellent heat resistance and low odor (due to its low vapor pressure) .

Spectra Group Limited H-Nu 780 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 650 nm to 810 nm (λmax = 791nm in DMSO).

Spectra Group Limited H-Nu 815 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 690 nm to 850 nm (λmax = 828nm in DMSO).

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

PL-TINP is a highly efficient hydroxyphenol benzotriazole ultraviolet light absorber (UVA).

AGITAN 760 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

Spectra Group Limited H-Nu 640 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 570 nm to 670 nm (λmax = 649nm in DMSO).

Spectra Group Limited H-Nu 470 initiates both free-radical and cationic photopolymerization, using a different set of co-initiators depending on the polymerization process • Type II photoinitiator: H-Nu 470 acts as a light harvester, followed by energy or electron transfer to a co-initiator molecule; produced reactive species activate photopolymerization • Commercial photoinitiator (TSCA status: LVE), non-toxic (LD50>5000 mg/kg).

Photomer® 4071 is a low viscosity and low odor diluent for UV and EB radiation curable varnishes and pigmented coatings like inks as well as for UV inkjet applications.

PHOTOMER® 4050 is an aliphatic difunctional acrylate of low viscosity, low volatility, good flexibility and reactivity. It is an effective reactive diluent with good viscosity reducing and solvency characteristics for a wide range of radiation curable acrylated oligomers and prepolymers.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

bossin® W-33 has excellent properties in curing, fast, heat resistance, low shrinkage and low irritation.

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PL-200 is an effective hydrophilic fumed silica providing excellent gloss and rheology control in inks, coatings, adhesives gel coats and resins.

PHOTOMER® 4127 (NPGPODA) is a low viscosity monomer used to dilute oligomers. It exhibits a low surface tension and very good wetting properties. It is particularly suitable for use in UV/EB curable varnishes for industrial uses, graphic arts, as well as screen printing, flexo and other inks on metal, paper/paperboard, plastic and on wood.