Products in Packaging & Paper: Solventborne Adhesive

Kolon Industries HIKOREZ® A-2115 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive(HMA). .

RELEASE WR 3308 is a water-borne release agent based on synthetic acrylic polymers compounded with additives that impart water repellency.

Kolon Industries SUKOREZ® SU-100 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-100 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Kolon Industries HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

Staybelite Ester 10 is the glycerol ester of partially hydrogenated wood rosin.

Hot polymerized SBR 1011AC elastomer is recommended for adhesive and pressure sensitive tape and label applications, and in mechanical rubber goods where non-staining and high tack is essential.

ANTIOX ASX-HSD is a synergistic blend of variuos antioxidants: phenolic, phosphorous-derivatives and thioester. It has been developed to stabilize natural rubber solvent-based adhesives. The product is a homogeneous powder blend, so to achieve an easy dissolution into the solvent.

Asahi Kasei Tuftec™ P1500 is a selectively hydrogenated polymer. It is good as a base polymer for pressure sensitive adhesives (PSA). It has excellent compatibility with a variety of tackifiers. With blending tackifier and white oil, it provides solvent-borne as well as hot-melt adhesives. It is particularly suitable for hot-melt adhesive with low viscosity and good thermal stability.

Guangxi Zhongchang Resin RGM128 is a maleic modified glycerine ester of gum rosin. designed to provide aliphatic compatibility in ink or oil paint formulations. The good solubility makes it a good co-resin to adjust solubility parameters in a wide variety of lithographic ink and varnish applications. It is an excellent pigment wetting resin and is recommended for use in economical flushing varnishes for heatset and sheetfed flushes.

Kolon Industries SUKOREZ® SU-130 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-130 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

ETERAC 7005-40 is Solvent-based PSA.

Kolon Industries HIKOREZ® T-1100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. It is used together with natural rubber for solvent based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Isoprene-Styrene copolymer (SIS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). .

COLOR PASTE S AVANA 893 is a dispersion of iron oxides, Titanium dioxide and inert filler in paraffin oil. Pigment concentration: 67%

RELEASE W20 GB3 is a waterbased release agent, based on acrylic polymers and special releasing agents.

RELEASE WR 2603 is a waterborne release agent based on synthetic acrylic polymers compounded with additives that impart a very high water repellency combined with excellent release properties.

Kolon Industries SUKOREZ® SU-120 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

West Tech Chemical Ltd WR 5095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

ichemco COLOR TAPE HM BIANCO 20 SIS is a very efficient white pigment masterbatch, aimed at coloring adhesive masses, either solvent born or hot-melt. The product is supplied in free flowing, dust free flakes suitable for a continuous adhesive production process. It is completely solvent free. The addition of COLOR TAPE HM BIANCO 20 SIS to the adhesive does not alter the adhesive properties, including aging, and will not cause any corrosion to the metal parts of the production plant. Appearance: dust free flakes Type of pigments: inorganic (metal oxides) Pigment content: 80% minimum Other ingredients: dispersing agents, antioxidants, thermoplastic rubbers.

ANTIOX ASX-HS is a synergistic blend of variuos antioxidant: phenolic, phosphorous-derivatives and thioester. It has been developed to stabilize natural rubber solvent-based adhesives. The product is a homogeneous powder blend. This enables to achieve an easy dissolution into the solvent.

Guangxi Zhongchang Resin RL10 Liquid Rosin Ester is a liquid rosin ester tackifier designed for applications requiring low odor and excellent stability. Soluble in esters, petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone aliphatic and chlorinated solvents.

Hot polymerized SBR 1006 elastomer is used in applications such as adhesives, mechanical rubber goods, floor tile, cove base and brake friction products.

Kolon Industries HIKOREZ® T-3100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). HIKOREZ® T-3100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

COLOR PASTE S NERO 54 is a carbon black dispersion in resin and solvent. Pigment concentration is about 16%, Total Solids are about 66%.

Hot polymerized SBR 1013 elastomer is used in adhesives, tire liners, and mechanical rubber goods, including auto mounts and household products.

RELEASE WP 3527 is a water borne release agent, based on synthetic polymers compounded with hydrophobic and releasing agents.

Puyang United Chemical C5 Petroleum Resin O-1102 is pure C5 aliphatic hydrocarbon resin. It's designed for Solvent based pressure sensitive adhesive (SBPSA), especially for NR and lIR SBPSA. 0-1102 has lower crystallinity which can brings adhesive good flexibility and creep resistance. So it works as a good tackifier for packing ad hesive, carton sealing, shoes adhesive and mouse trap glue etc. 0-02 lower molecular weight distribution and good color make it can works in SIS based HMPSA. It also can replace part of hydrogenated hydrocarbon resin when production APAO and EVA hot melt adhesive. The lower crystallinity of O-1102 makes it can works as tackifier and softener for tire rubber etc rubber parts production.

COLOR TAPE OIL AVANA 1 is a dispersion of pigments in mineral oil. Oil content = 25 ± 5%.

Hot polymerized SBR 1006C elastomer is used in applications such as adhesives, mechanical rubber goods, floor tile, cove base and brake friction products.

Hot polymerized SBR 1011AE elastomer is recommended for adhesives, pressure sensitive tape and label, and mechanical rubber goods applications where nonstaining and high tack is essential.

Kolon Industries HIKOREZ® A-1115 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive(HMA). .

LESTAC TR100 is terprene resin, also known as polyterprene resin,a pale yellow granular thermoplastic resin obtained from mainly terprene feedstocks either from wood sources or from citrus fruits, by the use of turpentine and α pinene and β pinene, in the role of aluminum trichloride catalyst. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for rubber compound, tire, etc.

Guangxi Zhongchang Resin RGM135 is a maleic modified glycerine ester of gum rosin. designed to provide aliphatic compatibility in ink or oil paint formulations. The good solubility makes it a good co-resin to adjust solubility parameters in a wide variety of lithographic ink and varnish applications. It is an excellent pigment wetting resin and is recommended for use in economical flushing varnishes for heatset and sheetfed flushes.

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

COLOR PASTE W HONEY is a brownish water borne dispersion of organic and inorganic pigments. Pigments concentration is about 40%.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Norst® PB-402-24 is a highly modified polyisobutylene polymer that exhibits high tack and cold flow over a very wide temperature range (-70°F to 450°F, with variants stable to 650°F and 800°F). It is impermeable to water or oxygen. It has good tensile and bond strength, high film strength, permanent tackiness, excellent aging/weather resistance, low stain, low electrical conductivity. It is odorless, colorless, and highly stable. Chemical resistance is comparable to other polyisobutylene polymers. PB-402-24 can be used as a high performance additive in any non-aqueous system where high tack and elasticity are needed.