Products in Tape & Label Adhesives: Pressure Sensitive Adhesive

Acronal® V 215 is an aqueous acrylate copolymer emulsion made with non-APEO (alkyl phenol ethoxylate) surfactants, intended for the production of pressure-sensitive adhesives. It is designed to provide outstanding pressure-sensitive adhesion in a wide variety of applications, including labels, tapes, and lamination. With its high solids combined with low viscosity, it is especially well-suited for applications such as flooring adhesives and other construction adhesive mastics.

Acronal® A 240 is an APEO-free, aqueous adhesive dispersion specifically employed in manufacturing pressure-sensitive adhesives for self-adhesive articles. It comprises an acrylic copolymer dispersion containing carboxyl groups. Its market focus includes adhesives and sealants, industrial printing, and packaging, catering to applications in chemical and industrial manufacturing. This product is in liquid form.

Butofan® LS 103 is an aqueous dispersion of a butadiene-styrene copolymer with carboxyl groups. Its application involves mixing with resins to manufacture pressure-sensitive adhesives for self-adhesive articles. These adhesives exhibit good adhesive properties, even at low temperatures, low water sensitivity, and excellent adhesion on hard and soft PVC films, polyester films, and electrically pretreated polyolefin films.

acResin® A 204 UV is a UV cross-linkable acrylic hot-melt polymer specifically employed in producing self-adhesive articles. Its market scope encompasses printing and packaging applications, particularly in the production of packaging, paper tape, and label adhesives for tapes and labels. This product, available in liquid form, exhibits a yellow coloration.

Acronal® 80 D is an aqueous dispersion of a polymer based on acrylic ester and styrene. It is utilized in markets such as adhesives and sealants, printing and packaging, with applications extending to tape and label adhesives. The physical form of Acronal® 80 D is a liquid.

acResin® A 250 UV is a UV-reactive, hot-melt acrylic copolymer utilized in manufacturing self-adhesive articles. Its applications span across adhesives and sealants, specifically in the printing and packaging sectors, focusing on packaging, paper tape, and label adhesives for tapes and labels.

Basonat® F 200 WD is primarily used in pressure-sensitive adhesives and is known for its cost-effectiveness and high performance. It is specifically targeted for use in adhesives and sealants within the printing and packaging applications, notably in tape and label adhesives. This product is available in liquid form.

Basonat® DS 3582 is designed for pressure-sensitive adhesive applications, particularly in tape and label adhesives. It boasts cost-effectiveness and high-performance attributes, aligning with CASE ingredient needs. Additionally, it holds labeling claims of being environmentally friendly, suitable for adhesive applications prioritizing sustainability and efficiency.

acResin® UV 3532 is a UV cross-linkable acrylic hot melt polymer used in the production of self-adhesive articles. Its appearance is a clear, slightly yellowish liquid. It may be used as a pressure-sensitive adhesive (PSA) in the production of removable labels, and tapes. Due to its low glass transition temperature, it may also be used as a freezer-grade adhesive in various applications.

acResin® A 260 UV is a UV cross-linkable acrylic hot-melt polymer employed in manufacturing self-adhesive articles. Its market focus lies within adhesives and sealants, especially in printing and packaging applications, specifically for packaging, paper tape, and label adhesives used in tapes and labels. This product, available in liquid form, exhibits a yellow coloration.

Acronal® A 145 is an aqueous dispersion consisting of an acrylate copolymer containing carboxyl groups. It is specifically employed in producing self-adhesive labels, films, and tapes. Due to its resilience against the impact of plasticizers, it is especially recommended for coating plasticized PVC film. However, given that the influence of plasticizers on pressure-sensitive adhesives varies based on the type and quantity of plasticizers in the film, comprehensive trials, especially storage trials, should be conducted before commencing the production of such articles.

Acronal® 3618 is available in liquid form, is a high-performance binder and resin designed for a wide range of applications. Acronal® 3618 is known for its features of high durability, good weather fastness, and weather resistance, it caters to markets including adhesives and sealants, building and construction, industrial, paints and coatings, and printing and packaging. This versatile product finds applications in architectural coatings, industrial adhesives and sealants, and tape and label adhesives, specifically in the form of pressure-sensitive adhesive. Its liquid form ensures ease of incorporation into various manufacturing processes.

CRA® 17 is a highly efficient controlled-release additive designed specifically for adjusting the release force of solvent-free DEHESIVE® systems. It offers exceptional performance in achieving the highest release values among all CRA® modifiers. Its key features include high efficiency, rapid curing, and stable release characteristics.

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

SILRES® 64558 VP is a toluene-based, ready-to-use formulation based on polysiloxanes and silicone resins. The product is preferably used as a binder in highly flexible composite tapes or as an intermediate to manufacture silicone pressure-sensitive adhesive (PSA) formulations. In composite tapes, SILRES® 64558 VP contributes to the tapes' excellent electrical insulation properties and outstanding long-term heat resistance. Besides, composite tapes made with SILRES® 64558 VP are highly stable against environmental impacts such as moisture, pollutants, and UV light, allowing them to be exposed continuously to constantly changing climatic conditions or UV radiation.

CRA® EM 460 is a highly efficient controlled-release additive specifically developed for adjusting the release force of silicone emulsion-based DEHESIVE® systems. It is used in conjunction with coating polymers like DEHESIVE® EM 427 or DEHESIVE® EM 428 to create release coatings. The resulting system is designed for pressure-sensitive adhesive release applications and is compatible with papers of different porosities and films. The cure is achieved through a vinyl addition chemistry mechanism.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

VINNAPAS® eco EAF 67 is an aqueous polymer dispersion, free of plasticizers, produced from vinyl acetate, ethylene, and acrylate monomers. This dispersion serves as a pressure-sensitive adhesive, exhibiting excellent cohesion and adhesion properties that remain effective even at elevated temperatures. The production of VINNAPAS® eco EAF 67 utilizes APEO-free surface active agents.

CRA® 21 is an exceptional controlled release additive specifically formulated for adjusting the release force in solvent-based DEHESIVE® systems. As a solvent-based additive, it delivers high release levels, making it highly efficient in its intended application. Additionally, CRA® 21 exhibits good release stability, ensuring consistent performance over time.

CRA® 42 is an exceptionally efficient controlled-release additive specifically designed to adjust the release force in solvent-free DEHESIVE® systems. It offers remarkable performance in achieving high release levels. Furthermore, CRA® 42 provides an extremely stable release, ensuring consistent and reliable results. It also boasts fast-curing properties.

VINNAPAS® EAF 67 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 67 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 67 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 67 may additionally be used as an adhesion promoter in adhesive formulations.

VINNAPAS® EAF 68 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as an adhesion promoter in adhesive formulations.

CRA® eco 17 is an extremely efficient controlled release additive used for adjusting the release force of solvent-free DEHESIVE® systems. It is derived from renewable raw materials and complies with the "Standard REDcert²." CRA® eco 17 offers the highest release values among all CRA® modifiers.

CRA® 23 is a highly efficient controlled-release additive designed to adjust the release force in solvent-based DEHESIVE® systems. As a solvent-based controlled release agent, it provides exceptional release levels. Moreover, CRA® 23 exhibits good release stability, ensuring consistent performance over time. It also boasts an excellent bathing life.

DEHESIVE® PSA 11 AP is a solvent-free, reactive silane mixture. Applied with addition-crosslinking DEHESIVE® or DEHESIVE® PSA-systems, it increases the adhesion to the substrate. The rub-off resistance of the cured silicone coating is improved significantly. It provides improved anchorage to unprimed PET film.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Vinavil 2841NA is an ammonia-free, high in solids pure acrylic polymer emulsion with high peel adhesion. It also coats well on silicone-coated release paper.

Vinavil 2841 is a high solids pure acrylic polymer emulsion with high peel adhesion. It coats well on silicone-coated release paper.

Rovene 4848 is a very soft non-carboxylated styrene-butadiene emulsion specifically designed for the use in a two part spray adhesive for open or closed cell foams and other contact and cold seal applications. Rovene 4848 has fast break characteristics that may allow it to be used in specially formulated one part spray adhesives. Rovene 4848 has found applications in two part foam-to-foam, one and two part fast breaking spray up adhesives, and special contact or cold seal applications in combination with polychloroprene and natural latex. When working with Rovene 4848 it is important to remember that it may be tackified, thickened and blended with other non-carboxylated and carboxylated emulsions. This flexibility allows for the formulating of a wide variety of adhesives with custom performance properties.

Rovene 4423 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label adhesives and flooring adhesives. This polymer emulsion allows for the formulation of permanent label adhesives which are high in peel and tack, yet require a minimum amount of tackifier. However, it provides good tack on its own, thus minimizing the amount of tackifer required. Rovene 4423 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers. Rovene 4423 can also be blended with natural latex for high shear tape adhesives and for use in special contact adhesive applications.