Products in Tape & Label Adhesives: Polyolefins

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

FluoroGrip® F (HD-FEP) Teflon® is made from high molecular weight resin for applications where chemical resistance, high flex life and stress-crack-resistant performance are required.

Tasnee PP H3080 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 8 g/10min. Tasnee PP H3080 is designed for cast polypropylene (CPP) film, both for metallization and general purpose applications with excellent processability characteristics. Cast film produced by Tasnee PP H3080 offers excellent transparency, gloss and high stiffness.

Tasnee LD 1925F is a Low Density Polyethylene with a Melt Flow Rate of 2.0 g/10min (190°C/2.16 kg). Tasnee LD 1925F is mainly recommended for crosslinked and non-crosslinked foam applications. It designed to provide uniform cell distribution during LDPE foam extrusion process. Special additive package is used to control the foam cell structure so that uniform cell size and distribution occurred during foam extrusion process. It has a suitable molecular structure and special additive package for providing control and uniform foam cell structure and excellent mechanical properties to the foam. Tasnee LD 1925F can be easily processed on all types of LDPE foam extrusion equipment. The melt temperature is recommended to be in the range of 160 - 200°C.

SAHARA H 034EM is a polypropylene homopolymer used for extrusion and thermoforming applications. This product is formulated with a low water-carry-over additive package.

Tasnee PP H3030T is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3.0 g/10min. Tasnee PP H3030T is designed for Bi-axial Oriented Polypropylene (BOPP) film applications, offering excellent transparency and gloss, high stiffness and excellent processability. Tasnee PP H3030T is designed for High Speed Bi-axial Oriented Polypropylene (BOPP) film lines. Tasnee PP H3030T is formulated to be used for both general purpose and metallized films.

Tasnee PP H3030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3.0 g/10min. Tasnee PP H3030 is designed for Bi-axial Oriented Polypropylene (BOPP) film applications, offering excellent transparency and gloss, high stiffness and excellent processability. Tasnee PP H3030 is formulated to be used for both general purpose and metallized films.

COPYLENE® CH020XK is a polypropylene homopolymer made with a non-phthalate catalyst. It is designed for BOPP (biaxially oriented polypropylene) film extrusion applications with high crystallinity. It is made with a non-phthalate catalyst.

PHS4000R is general purpose injection molding, low water carryover polypropylene homopolymer.

Ras Lanuf Oil & Gas Processing Company LLF-181H is a low density polyethylene which is used in food packaging tapes and tapes for agricultural purposes.

Kolon Industries HIKOTACK® P-120P is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. This grade especially shows very good compatibility with polar polymer such as epoxy resin, alkyd resin and ethylene vinyl acetate(EVA) by modification of phenolic monomer. The major usages are vehicles in the coating industry and tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA). .

HOMOPOLYMER POLYPROPYLENE (PP) FS2011E is a polypropylene homopolymer intended for the extrusion of biaxially oriented film. It is easy to process and suitable for metallization. The film made from this resin exhibits excellent transparency, excellent mechanical and barrier properties.

NIPLENE F50 AGR contains characteristics called Chemically Coupled Reinforcement, Homopolymer.

FULXUS® FX-SB-180 is used by changing the base resin from SEBS to SBS, low cost products can be manufactured. However, it has low weather resistance, and therefore it is not suitable for outdoor use.

PHS3600R is general purpose injection molding, low water carryover polypropylene homopolymer.

RG 1102 G is a Polypropylene Homopolymer for Extrusion and Thermoforming Applications With High Melt Stability. It is used in Thermoformed Parts (High Thickness or Big Size), Tape Yarns,  MonoFilaments, Strapping, Sheets

RG 1102 J is a Polypropylene Homopolymer With Narrow MFR Range and High Processing Stability. It is used in General Thermoforming, Diary Products, Desserts, Tapes, Carpet Backing

Safron® H713 - 06 polypropylene resin is developed for the production of slit film tapes where high extrusion speeds are required. It offers excellent processability and low water carry over. Safron® H713-06 is also suitable for general purpose injection molding applications.

Kolon Industries HIKOTACK® P-110S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

KVIS 10 is the trade name of Kothari’s polyisobutylene product with molecular weight ranging from 950 to 1000. Produced in our state of the art plant complex. KVIS 10 is transparent, free of particles, and is a leading choice for a wide range of applications.

HDPE product for stretched tape are divided into product for mono-filament, flat yarn and wool pack. YUHWA HIDEN E308U product can be handled under various processing conditions due to high tenacity and good tensile properties and can be used for fishing nets, ropes, shade nets, wool bags and stretched tapes. This product have good chemical resistance, electric properties, weatherability and flexibility as a product with the good processability.

Trilene HY3.8FY is a polypropylene homopolymer for production of stretched tape (yarn or raffia). Also can be use for transparent woven bag which require good clarity, stiffness.This grade uses Unipol® polypropylene technology with latest catalyst technology.

COPYLENE® CH005 is a fractional melt flow polypropylene homopolymer resin available in pellet form. It is made with a non-phthalate catalyst.

Ras Lanuf Oil & Gas Processing Company LLF-183N is a low density polyethylene which is used in casting tapes and uses where good mechanical properties.

HDPE product for stretched tape are divided into product for mono-filament, flat yarn and wool pack. YUHWA HIDEN HT306 product can be handled under various processing conditions due to high tenacity and good tensile properties and can be used for fishing nets, ropes, shade nets, wool bags and stretched tapes. This product have good chemical resistance, electric properties, weatherability and flexibility as a product with the good processability.

Kolon Industries HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

Petroquim PH0130 is Suitable for general extrusion processes, raffia, blow molding and thermoforming. It is easily processable and productivity is good. Has good stiffness/impact and tenacity/elongation ratios. Is also highly resistant to melting.

Nano4 Bio PE EC MB 12 is an electrically conductive masterbatch based on bio-polyethylene.

UltraPly™ TPO Flex Adhered is a flexible Thermoplastic Polyolefin roofing membrane produced with polyester weft-inserted reinforcement designed specifically for adhered installations. UltraPly TPO Flex Adhered membrane meets or exceeds all requirements for ASTM D 6878 Specification. This reflective, heat weldable TPO membrane is available in 60 mil (1.52 mm) thickness and is suitable for a variety of low-slope adhered roofing applications.