Products in Tape & Label Adhesives: Styrene Butadiene Rubber (SBR)

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

Teckrez® CX-902 is a hydrocarbon resin based on selected C9 and DCPD feedstocks. It is used as an alkyd coating modifier to increase hardness, gloss, and chemical resistance. As a resin binder in printing inks, Teckrez® CX902 improves pigment wetting and solvent release. Teckrez® CX902 is used as a rubber processing aid, tackifier resin in mastic adhesives, and modifier in concrete curing and other coating applications.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L120 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L130 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

HT9100 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9100 is a transparent granular solid with the color of yellow to light brown. HT9100 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Aquadhes® 6001 is a a water-based rosin ester dispersion and solvent free.

Aquadhes® 6002 is a a water-based rosin ester dispersion and solvent free.

China Star Materials Octylated diphenylamine (Antioxidant OD) is antioxidant for NR, SBR, NBR and CR. It has good protective character to heat, oxygen, flexing and crazing, and is efficient to rubber whether used together with carbon black. It has obvious thermal brittleness resistance in CR, and can increase its protective character to ozone aging.

COLOR PASTE W BIANCO 4C (White) is a water based dispersion of rutile titanium dioxide.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L110 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Aquadhes® 6102 is a a water-based rosin ester dispersion and solvent free.

Konson® accelerator MTT is a thiazole heterocyclic compound containing active sulfur atoms, which cross-links halogen-containing polymers. It is suitable for vulcanization cross-linking of CIIR and CR,especially as a highly effective accelerator for CR. Compared with NA-22, Konson® accelerator MTT maintains the good physical properties and aging resistance of NA-22 vulcanized CR, and also improves the scorch performance and operation safety of the rubber compound. Also combines faster curing characteristics. Konson® accelerator MTT is easy to disperse in rubber, no pollution, non-discoloring . It is usually used in the manufacture of cables, tapes, rubber shoes, tires, and bright-colored products.

Aquadhes® 6101 is a a water-based rosin acid dispersion and solvent free.

UVISTOP TRM 1 is a synergistic blend of light stabilizers in powder form.

ANTIOX ASX is a synergistic blend of three non-staining antioxidants, including a primary phenolic stabilizer, a thio-ester for the long term stability, and finally a phosphite, for the high temperature protection.

UVISTOP UV-HM is a synergistic blend of light stabilizers (HALS) and UV absorbers (benzotriazole class) in powder form.