Products in Agricultural Films: Cost Effective

MAKROTECH™ UV is a range of opaque colored polycarbonate sheets. The product is virtually unbreakable with extremely high impact resistance. The product offers high temperature performance too. MAKROTECH™ UV is one side UV-protected sheet which allows possibilities for outdoor applications.

Kritilen® I R770 contains the same Infra-Red absorber as KRITILEN® IR700, but at a higher concentration. Its proposed addition rate in LDPE or LDPE/EVA films is at the range of 2%-7%, depending on the film thickness, VA content of the film and required "thermic effect".

SPECIAL BLACK 4 is a versatile post oxidized, regular color gas carbon black for masstone coloring and tinting of solvent and water-based coatings. It is also suitable for high quality printing and duplicating inks and can be used for coloring plastics or synthetic fibers with high insulating properties. Amorphous carbon. Used for solvent-based flexo inks, tin printing inks UV curing printing inks, screen printing inks, copperplate printing inks and for all kinds of automobile and industrial coating. Offers high insulating properties.

Black Masterbatch 354 is used for Blow Molding and recommended for injections, Sheets, Pipes, Cables and Compound.

ETHYLENE PROPYLENE RUBBER (EPR/EPDM) 552E is a non-oil extend grade with high molecular weight, 552E can offer high filler and oil loading formulations which contribute to have cost saving compounds.

B2190 is a film grade black PE masterbatch. PE carrier black masterbatch, it contains premium carbon black , with high opacity, blackness & dispersion.

Unirubber Virgin EPDM Mulch is a mulch for protection, recreational surfaces and walkways.

Black Masterbatch 360 is recommended for injections,Thin films, Sheets, Pipes, Blow moldings, Cables and Compound.

LS‐783 areas of application include polyolefin (PP, PE), polyurethane, polyfomaldehyde, polyamide and polyester and polyester with elastomers. And it can be used in engineering plastic suchad ABS When be used in Iow concentration agricultural film system (LDPE or LLDPE), it delivers excellent cost/perfomance benefits.

CARBOMAX® BIO S65BH is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable and bio-sourced polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the products made of bioplastics.

KRITILEN® IR550 contains an effective inorganic Infra-Red absorber. Recommended addition in LDPE films is 5%-15% depending on film thickness and required "thermic effect". For LDPE/EVA co-extruded films, recommended addition is 2%-10% depending on film thickness, VA content of the film and required "thermic effect".

InnoPlastics AG P-Nr. 2020 - InnoPE-HD gray is a type of HDPE Regranulate.

TPE Solutions TPV 135A is an EPDM/PP TPV compound designed to replace thermoset elastomers such as polychloroprene (Neoprene) and EPDM compounds as well as sponge. This grade is a Shore 35A fully vulcanized EPDM/PP TPV. This grade is black and designed for applications that require low hardness. Ideal for applications in the Automotive and Building Construction market that requires excellent ozone and uv resistance. TPV rubber provides the advantage of low-cost thermoplastic processing such as Injection Molding, Extrusion and blow molding.

KE-8020 is Most economical products. KE-8020 is used in thick extrusion and molding.

AROSPERSE® 15 thermal black is the largest particle sized DEC carbon black available. It is an extremely clean (low sieve residue) thermal black that produces smooth extrusions finding applications in XLPE electrical cable insulation / jacketing, thin wall membranes of many types and metals refining. It also works well in hose & liners, sponge applications, gaskets and as an extender for fluorocarbons. It provides excellent compression set properties.

InnoPlastics AG P-Nr. 1821 - InnoPE-LD colored is a type of LDPE Regranulate for Pipes.

Black Masterbatch 4420 is recommended for injections, Blow moldings, Cables, Sheets, Pipes, Water Pipes, Fibers and Compound.

InnoPlastics AG P-Nr. 1815 - InnoPE-LD transparent is a type of LDPE Regranulate for Sheets.

AROSPERSE® 3 is a medium color specialty carbon black that provides good dispersibility with medium to long term UV protection. Its low sieve residue and low ash levels results in good extrudability and low screen pressure build up. Uses include high pressure plastic pipe, geomembrane, geogrid and wire and cable jacketing.

Black Masterbatch With Recycled Pe Resin, 20% Carbon Black Powder, With Calcium Filler. Low Price, Fine Dispersion Great Tinting Strength. Garbage bag is a film made of plastic resins (commonly used polypropylene, polyethylene, polyester, nylon, etc.). It is an essential item in people's daily life and are mostly disposable, low in price. The color masterbatch for waste bags is also low. Many of them are recycled materials with carbon black content ranging from 5% to 35%.

Oxy Vinyls 216S is suspension PVC resin designed for rigid applications.

InnoPlastics AG P-Nr. 1920 - InnoPE-MD light gray is a type of LDPE Regranulate for Pipes.

UV MB 01(SV 91A001UVA) U.V 770 is used for Specifically, LDPE Lamination on PP Raffia and it having advantage of Excellent light stabilizer at low cost.

Hubei Hongxin Chemical OB-1 For PP is yellow greenish powder.

Gemapilen® BRC GF15 is 15% glass fiber reinforced PPR. It is manufactured for the new generation of co-extrusion PPRC multilayer composite pipes reinforced withglass fiber and specially formulated additives. Composite pipes are an alternative to foil reinforced pipes that are tougher and more cost beneficial. Which demonstrate outstanding mechanical properties such as high strength, high stiffness and excellent impact resistance.

Brightening masterbatch is also known as fluorescent brightener masterbatch. The whitening masterbatch produced with imported fluorescent whitening agent, covering agent, antireflection nucleating agent and other substances. The whitening masterbatch has the functions of whitening, brightening, and removing yellow-green light.

Polyknit Easyform P401 is a warp knitted fabric composed of high tenacity (HT) Polyester yarns knitted in an innovative design specifically to provide optimum reinforcement of silicone hoses. Product is typically used for cold side applications such as coolant transmission hoses.

Shandong Chuanjun Chemical Diethylene glycol dibenzoate(DEDB)e is a new plasticizer in China. It widely used in PVC products as main plastizer the 1970's abroad. It can replace the dioctyl phthalate and dibutyl ester. Its features include light color, good plasticized capacity, good compatibility , low release, good heat stability, good resistance to freeze , extraction, UV ray, oxidization and volatilization and good electrical performance. It is the cheapest new plasticizer in China.

AROSPERSE® 11 is an easily dispersible carbon black that is useful in adhesives for adding and improving uncured sag resistance. The high structure and small particle size also imparts excellent cured modulus and elongation to the cured products made with it. Its small particle size also improves resistance to ultraviolet light degradation.

AROSPERSE® 7 is an excellent large particle carbon black with blue tone for producing utility concentrates. It disperses well, lets down easily to lower concentrations and in general processes well producing low screen pressure build up. Product use include polymer extension, molded goods, medium gage films, and cold water pipe and in general tinting applications, for both solvent and waterborne coatings.

Kritilen® HT 555 is a special IR-absorber that does not affect film clarity. For better results, it is recommended to combine it with EVA, at an addition of 3%-10%.

Bemalon 1000 Antistatisk is a partially crystalline modified thermoplastic (PE-UHMW).