Products in Agricultural Films: Good Mechanical Properties

Evalene® LF10181 is the resin of choice for tough flexible films. It exhibits a good balance of tensile and impact strength which makes it ideal for a wide range of film and packaging applications.

GEHR PBT® is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

GREENSTAB® 5115(PF) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

Goldstab Organics PP 3040 K Provides higher output, reducing the processing cost & excellent mechanical and esthetic properties.

Polyknit Easyform H402 is a warp knitted fabric composed of glass and aramid yarns and knitted in a pattern specifically to provide optimum reinforcement of silicone hoses.

INOFLON® 230 has good flow with high bulk density and good mold filling behavior and it is used in automatic and isostatic molding of parts, molded sheets, small diameter and thin wall thickness tube.

GREENSTAB® 4220(P) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

Gemapilen® BRC GF25 is 25% glass fiber reinforced PPR. It is manufactured for the new generation of co-extrusion PPRC multilayer composite pipes reinforced withglass fiber and specially formulated additives. Composite pipes are an alternative to foil reinforced pipes that are tougher and more cost beneficial. Which demonstrate outstanding mechanical properties such as high strength, high stiffness and excellent impact resistance.

GREENSTAB® 4440(P) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

UV MB 04(SV 91A004 UVA) is used for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP in fibers and film. and it having advantage of The best UV Stabilizer for high Temperature & long service life.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

Goldstab Organics 3018 P Provides higher output, reducing the processing cost & excellent mechanical and esthetic properties.

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

CARBOMAX® BIO S65LX-HT is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable and 100% bio-based polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the products made of bioplastics.

• One of the BioBlend® BC Resins designed for injection molded applications.• Made from annually renewable agricultural resources.• BC 27255 contains 50% NuPlastiQ® CG BioPolymer blended with a high heat, high flow PLA homopolymer.• BC 27255 is 100% biobased.• BioBlend® BC 27255 is supplied in pellet form, fully compounded.

• One of the BioBlend® BC Biodegradable/Compostable Resins designed for mulch films.• Made from 50% annually renewable agricultural resources and PBAT.• BioBlend® BC 27150 is supplied in pellet form, fully compounded.

Gemapilen® BRC GF40 is 40% glass fiber reinforced PPR. It is manufactured for the new generation of co-extrusion PPRC multilayer composite pipes reinforced withglass fiber and specially formulated additives. Composite pipes are an alternative to foil reinforced pipes that are tougher and more cost beneficial. Which demonstrate outstanding mechanical properties such as high strength, high stiffness and excellent impact resistance.

IKAMOD 135A is a synthetic material, kind of thermoplastic elastomer, made from high density polyethylene (HDPE) and chlorine. This chlorinated polyethylene (CPE) material is designed as an additive to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. It has very good mechanical properties (elongation at break, tensile strength) and very good toughness.

Gemapilen® BRC GF20 is 20% glass fiber reinforced PPR. It is manufactured for the new generation of co-extrusion PPRC multilayer composite pipes reinforced withglass fiber and specially formulated additives. Composite pipes are an alternative to foil reinforced pipes that are tougher and more cost beneficial. Which demonstrate outstanding mechanical properties such as high strength, high stiffness and excellent impact resistance.

BRALEN RB 03-23 is a general purpose grade of low density polyethylene. It is characterized by high environmental stress cracking resistance and very good mechanical properties. This grade is additives free.

UV MB 02(SV 91B003 UVA) U.V. 770 is used for Specifically, LDPE Lamination on PP Raffia and it having advantage of Better cost performance ratio

Semi-crystalline high-performance plastic with very good sliding properties and very good mechanical Properties even under thermal stress. In addition, PEEK is characterized by a excellent chemical resistance.

PA 6 reinforced with glass beads

Goldstab Organics 3016 N Provides higher output, reducing the processing cost & excellent mechanical and esthetic properties.

Diamond HI-851 is a High Impact Polystyrene grade with Opaque & matt finish surface. It gives excellent mechanical and heat resistance properties while providing with easy process ability and molding applications.

OpaLene LL F2001S is a butene co-monomer based linear low density grade produced with the latest Ineos Gas Phase polymerization technology.

• One of the BioBlend® BC Biodegradable/Compostable Resins designed for mulch films.• Made from 50% annually renewable agricultural resources and PBAT.• BioBlend® BC 27152 is supplied in pellet form, fully compounded.

• One of the BioBlend® BC Biodegradable/Compostable Resins designed for mulch films.• Made from 50% annually renewable agricultural resources and PBAT.• BioBlend® BC 27154 is supplied in pellet form, fully compounded.

Minima GP1003 is a certified compostable resin for blown film extrusion. It is ideal for takeaway bags, kitchen waste bags and other compostable.

CARBOMAX® BIO S65MC-IG is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the films made of bioplastics.

INOFLON® 210 has good flow with high bulk density and good mold filling behavior and it is used in automatic and isostatic molding of parts, molded sheets, small diameter and thin wall thickness tube.

The chemical structure of Chlorosulfonated Polyethylene is a fully saturated backbone. CSM has excellent ozone resistance, atmospheric aging resistance chemical resistance, ionizing radiation resistance and color stability, good mechanical properties, thermal aging resistance, low temperature resistance, flame resistance, abrasion resistance and electrical insulation function.

HIPTEN® 22003 is used in Heavy duty bags, Agricultural films, Shrink film.

CARBOMAX® BIO S65MC is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the films made of bioplastics.

HIPLEX® TR 455 natur is used in Gas pipes and potable water pipes.

GREENSTAB® 4660(P) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.