Products in Agricultural Films: Good Sliding Properties

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaflex® / U A85 ST C01 is a TPU with a Shore hardness of A 85. It is characterized by its excellent flowability and is also suitable for thin-walled components. Kebaflex® / U A85 ST C01 is very resistant to hydrolysis, flexible at low temperatures and resistant to microorganisms,.

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

POM-MD30, POM copolymer unreinforced, medium viscosity, 30% mineral-reinforced

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

POM copolymer unreinforced, medium viscosity, electrically conductive

POM-CF20, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

BARLOG plastics GmbH Kebablend® / WR XB 111001/2 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

Acetal-C ESD90, dissipative is a high-quality engineering plastic material. It is used to prevent uncontrolled static discharge in sensitive electronic environments or in explosive atmospheres.

GEHR PET® is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

POM copolymer unreinforced, medium viscosity

Acetal-C + PTFE is a high-quality engineering plastic material.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified, reduced emissions for automotive interior applications

BARLOG plastics GmbH Kebaflex® / U A90 ST B01 is a TPU with a Shore hardness of A 90. It is characterized by high flexibility and very good wear and abrasion resistance.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

BARLOG plastics GmbH Kebablend® / EC FE 190501 TPE is a TPU with a Shore hardness of A 87. It is characterized by good hydrolysis resistance, very good wear and abrasion resistance as well as good damping and resilience behavior. It also has good electrically conductive properties.

POM-MD30, POM copolymer, medium viscosity, 30% mineral-reinforced

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

BARLOG plastics GmbH Kebablend® / WR 01/1125/2110 is a special compound based on POM that combines high strength and rigidity with good sliding behavior and high wear resistance.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

POM copolymer unreinforced, very low viscosity

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

POM copolymer unreinforced, medium viscosity, antistatic

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

KEBABLEND / WR 01/2110 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Acetal-C ESD60, conductive is a high-quality engineering plastic material. It is used to prevent uncontrolled static discharge in sensitive electronic environments or in explosive atmospheres.

BARLOG plastics GmbH Kebaflex® / U D63 ST B.01 is a TPU with a Shore hardness of 63D. It is characterized by flexibility and good wear and abrasion resistance.

POM-GF27, POM copolymer, medium viscosity, 27% glass fiber reinforced

BARLOG plastics GmbH Kebablend® / WR 04/1310/2115 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

GEHR E-CTFE® is a linear block copolymer and belongs to the group of amorphous high-performance plastics. It is highly UV and weather resistant and also withstands high-energy (radioactive) radiation. Ethylen-Chlortrifluorethylene exhibits an extraordinary impact strength at temperatures ranging from -76 °C to +150 °C. A great part of the product properties attributes to the very smooth surface and differentiates HALAR® from other fluoropolymers. Due to the fact that E-CTFE is very pure, this material is being used to process chemicals and ultrapure water for the semiconductor industry. Also the permeation resistance to oxygen, carbon dioxide, chlorine gas and hydrochlorid acid is 10 to 100 times better than PTFE.

POM-HI, POM copolymer unreinforced, medium viscosity, impact modified