Products in Agricultural Films: Oil Resistant

Dragonsorb® 783 has good compatibility, processing thermal stability, oil resistance, water resistance, and extraction resistance. This product reflects the mechanisms of various light stabilizers and has the best synergistic and complementary effect. It can be used for food packaging and is mainly used for PE agricultural film, polyethylene, polypropylene, polyurethane, polyamide, and polyester elastomers. This product can also be used in ABS and engineering plastics.

NBR 2655 is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

NBR 1845 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

NBR 4045 is essentially an acrylonitrile (36-40%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. High content of acrylonitrile, very high oil resistance.

NBR 2675 is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

Millathane® 26 is often used in non-food handling applications, including rollers, because of its hydrolysis resistance and good strength properties. The inherent hydrolysis resistance of polyether urethanes makes it more forgiving in steam autoclave cure processes than polyester grades.

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

Product Information: BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Processing Method: Injection Molding and Some Extrusion Applications Chemically bonds with polyethylene and polypropylene for overmold applications - Seals, Grips

RE-FLEX® 1588AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

MM-PVC I 1583 is PVC plasticized compound by Injection Processing

Shandong Donglin New Materials CPE (Chlorinated Polyethylene) 135A is a high molecular polymer with linear structure generated by the reaction of HDPE and chlorine. It itself is a special thermoplastic elastomer. It has the following excellent chemical properties: good weather resistance, flame retardancy, It is resistant to chemicals and ozone. Its basic function is to improve the impact strength and weather resistance of PVC products. Donglin CPE 135A has excellent elongation at break and the best tensile strength. Compared with other CPE products, our CPE has higher impact strength.

CHLOROPRENE M-40 is applied in General purpose, cables, belts, hoses, other industrial applications.

Nancar® NBR 1041 is a copolymer of butadiene and acrylonitrile with excellent oil resistance. It is polymerized at low temperature and contains sufficient antioxidant for normal aging conditions. It cures faster and provides higher modulus and tensile strength..

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

CHLOROPRENE EM-40 is applied in Calendared sheets, extruded products, sponge products with complex shapes.

Epoxidized soybean oil/ESBO can be used in most products of polyvinyl chloride, such as all kinds of food package materials, medical products, different kinds of films, sheet materials, tubing, sealing strip of refrigerator, artificial leather, plastic wallpaper, electrical wires and cables and other commodity plastic products .It also can be used as special

RE-PLAS® PPA 150 plasticisers are saturated polyester resins used in the production of PVC compounds and rubber compounds, providing resistance to volatility, resistance to chemical extraction and migration. These polymeric plasticisers are long chain polyesters with high molecular weight which results in a stable, durable and long lasting plastic or rubber product.

V71C is a Terpolymer FKM material developed to offer increased efficiency and service life in low temperature applications.V71C extends the operational performance of FKM seals by a full 15°C lower than is possible with well established low temperature FKM grades. It sets a new industry benchmark in low temperature performance.V71C exhibits the same chemical and mechanical properties as B-type and G-type FKM grades.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V71C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold (Arctic) operating environments Mechanical seals Flow meters & sensors Seal applications that are exposed to cold situations or high temperature variations.

CHLOROPRENE DCR-66 is applied in Automotive parts / High strength and loading with excellent low temperature resistance, anti-vibration properties.

RE-FLEX® 780AJLM is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

CHLOROPRENE DCR-30 is applied in General industrial purpose, automotive parts / Products requiring low tempearture resistance (for high loading).

BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Chemically bonds with polyethylene and polypropylene for overmold applications

BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Chemically bonds with polyethylene and polypropylene for overmold applications

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications.V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance.V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold operating environments Seal applications that are exposed to cold situations Applications that demand high variations in temperature

RE-FLEX® 795AS is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Product Information: BP Flex TPV's are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria.Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves - seals, Grommets, Under Hood Applications Reprocessable Processing Method: Injection Molding and Some Extrusion Applications Chemically bonds with polyethylene and polypropylene for overmold applications

RE-PLAS® 333 plasticisers are saturated polyester resins used in the production of PVC compounds and rubber compounds, providing resistance to volatility, resistance to chemical extraction and migration. These polymeric plasticisers are long chain polyesters with high molecular weight which results in a stable, durable and long lasting plastic or rubber product.

CHLOROPRENE DCR-107 is applied in Belts, air springs / Low exothermic polymer.

RE-FLEX® 1592AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-PLAS® 210 plasticisers are saturated polyester resins used in the production of PVC compounds and rubber compounds, providing resistance to volatility, resistance to chemical extraction and migration. These polymeric plasticisers are long chain polyesters with high molecular weight which results in a stable, durable and long lasting plastic or rubber product.

Tovo Gomma NBR/SBR ANTI EC 70 is a rubber composite with the trade name Economic oil resistant sheet 70 ShA with Oil resistance application.

Aipol Spa APAN is a thermoplastic polyurethane (TPU) pellet, produced through “reactive extrusion” in the Aipol plant of Montegranaro. The TPUs combine the high technical properties of the polyurethane elastomers, to the possibility of processing through a termoplastic technology. A bridge between rubber and traditional thermoplastics.

RE-FLEX® 580AXL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

N70M is a NBR copolymer that provides excellent resistance to petroleum based oils and fuels.N70M has been developed to offer excellent mechanical properties such as compression set, tear and abrasion resistance, making it ideal for dynamic applications. Good water resistance is also a characteristic of this material.Meets BS2751 BA70 and ASTM D2000/SAE J200 line call-out M2BG 714, B14, EA14, EF11, EF21, EO14, EO34 and F17.Key Attributes Low temperature flexibility Stability to mineral oils and hydraulic fluids Good resilience Typical Applications Topside pipe systems General purpose sealing applications

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves