Products in Agricultural Films: Polyamide 6 (PA 6)

Akulon® F136-C is a polyamide 6 (PA 6) that functions as a resin with several notable features, including excellent mechanical strength, food contact acceptability, good barrier properties, high viscosity, and lubrication characteristics. It is utilized in markets such as agriculture, feed, printing, and packaging.

Akulon® F136-C CRC-MB is a polyamide 6 (PA 6) that functions as a resin suitable for food contact applications and is characterized by its high viscosity and lubrication properties. It is often employed in the agricultural sector, specifically for producing agricultural films, including other agricultural film applications where its specific features are beneficial.

Adell Plastics, Inc. Adell™ Polyamide BR-18 is a Polyamide 6 (Nylon 6) material filled with 40% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-18: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BH-38 is a Polyamide 6 (Nylon 6) material filled with 40% mineral. It is available in North America.Typical application of Adell Polyamide BH-38: Automotive

Adell Plastics, Inc. Adell™ Polyamide BD-10 is a Polyamide 6 (Nylon 6) material. It is available in North America. Primary attribute of Adell Polyamide BD-10: Impact Resistant.

Adell Plastics, Inc. Adell™ Polyamide BD-30 is a Polyamide 6 (Nylon 6) material. It is available in North America. Primary attribute of Adell Polyamide BD-30: Impact Resistant.

PA 6 reinforced with glass beads

PA 6 reinforced with glass beads

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

RUGOPA® M40 100 NT00 is a PA6 unfilled natural for injection applications.

Next Nylon 6 Industrial Series NG15-02JBK is PA6 Glass Fiber Reinforced Black Compound

RUGOPA® M60 100 NC00 is a PA6 unfilled natural for injection applications.

SINTERLINE® Unfilled are the first polyamide 6 powder range designed for selective laser sintering (SLS). This solution yields the mechanical and thermal performance required to make 3D parts printing a compelling option for prototyping and low to medium volume production.

Nylene Nylon 6 polymer designed for use in extrusion coating and cast and blown filmExcellent grease resistance, toughness, and resistance to abrasion.Films made from Nylene® 615 C have barrier properties against oxygen and aroma typical of nylon 6.Meets the requirements of 21 CFR 177.1500 for food contact.

Nevimid 6 B E302 NATURALE is a Polyamide 6, toughened. its used in Automotive & Agricolture Consumer Goods

Nevimid 6 B G30 ST NATURALE is a Polyamide 6, reinforced with 30% glass fiber, toughened. its used in Automotive & Agricolture Consumer Goods

SINTERLINE® 40 % GLASS FILLED are the first polyamide 6 powder range designed for selective laser sintering (SLS). This solution yields the mechanical and thermal performance required to make 3D parts printing a compelling option for prototyping and low to medium volume production.

Nevimid 6 MLD E300 NATURALE is toughened. Its used in Automotive & Agricolture Consumer Goods.

Nylene Glass and ceramic fiber reinforced nylon 6 injection molding material Designed to provide high dimensional stability, very high stiffness, and a hard surface, while maintaining the heat and chemical resistance typical of nylon products Suitable for such uses as valve bodies, pump housings, hydraulic fittings and couplings, and other applications which require this unique set of characteristics

Normal viscosity polyamide 6, modified with 25% PTFE

Glass Sphere Reinforced Nylon Resin (PA6)

UBE NYLON 1030 B is a high viscosity, unmodified Polyamide 6 for general application (tubes, film, sheets).

Nevieco PA6 FF BK is a industrial grade.

Nylene 50% glass fiber reinforced, heat-stabilized nylon 6 injection molding resin Specifically designed for maximum strength and stiffness while maintaining the heat and chemical resistance typical of nylon 6 resins Suitable for brackets, enclosures, valve bodies, and other uses where maximum strength and stiffness are required

Nevimid 6 B B30 NERO is a Polyamide 6 reinforced with 30% glass beads. its used in Automotive & Agricolture Consumer Goods

Normal viscosity polyamide 6, modified with 25% PTFE

Nevimid 6 B G10 NERO is a industrial grade. Its used in Automotive & Agricolture Consumer Goods.

RUGOPA® M60 016 NC00 1000 is a PA6 50% glass fiber natural (Heat stb.+UV Protection) for injection applications.

Nevimid 6 B G15 NATURALE is a Polyamide 6 reinforced with 15% glass fiber. its used in Automotive & Agricolture Consumer Goods

Nevimid 6 B B30 NATURALE is a natural color. Its used in Automotive & Agricolture Consumer Goods.

Nylene Heat stabilized version of NYLENE 451 recommended for molding - Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Normal viscosity polyamide 6, modified with 25% PTFE

Nevilub PA6 GF10 NATURALE is a Polyamide 6 filled with 10% graphite. its used in Automotive & Agricolture Consumer Goods Metal Replacement

Nevilub PA6 TF10 NERO is a Polyamide 6 filled with 20% PTFE. its used in Automotive & Agricolture Consumer Goods Metal Replacement

PA 6 reinforced with glass fiber, heat stabilized