Products in Greenhouse & Tunnel Films: Cost Effective

Hubei Hongxin Chemical OB-1 For PE Film is an excellent thermal stability and weather resistance and good compatibility with additives in plastics.

KRITILEN® IR700 contains an alternative effective Infra-Red absorber. The recommended addition rate in LDPE or LDPE/EVA films is at the range of 3%-10%, depending on the film thickness, VA content of the film and required "thermic effect". It influences the film haze at a lower degree than IR550, keeping the same high transmittance.

MLPlastics Additive Masterbatches PE EPH500 is a fluoropolymer based additive masterbatch containing 5% of the effective substance in PE carrier resin. Acts as a processing aid. It reduces the melt fracture (sharkskin), die-build-up and power consumption. Increases throughput. The masterbatch forms a thin coating on the metal surfaces that acts as a lubricant and reduces the friction between the metal and the polymer. Compatible with polyolefin.

UV MB 04(SV 91A004 UVA) is used for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP in fibers and film. and it having advantage of The best UV Stabilizer for high Temperature & long service life.

• One of the BioBlend® BC Resins designed for injection molded applications.• Made from annually renewable agricultural resources.• BC 27255 contains 50% NuPlastiQ® CG BioPolymer blended with a high heat, high flow PLA homopolymer.• BC 27255 is 100% biobased.• BioBlend® BC 27255 is supplied in pellet form, fully compounded.

UV MB 02(SV 91B003 UVA) U.V. 770 is used for Specifically, LDPE Lamination on PP Raffia and it having advantage of Better cost performance ratio

Micro-FL-1014 C is an economical masterbatch based on Talc with LDPE carrier which contributes to extrusion process stability and improved output. It improves MD tear resistance and dart impact properties , retains light transmission levels and improves MD/TD shrinkage levels.

UV MB 06(SV 91A006 UVA) is used for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP in fibers and film and for Food grade applications and it having advantage of Better cost performance ratio

AirOFilm® Agri improves shelf life and ensures that this type of load arrives in perfect condition.

Euro Extrusions LDPE is the low density version of Polyethylene. It has less hardness, stiffness and strength compared to HDPE, but more ductile. This plastic has an optimal density, hard wearing construct and long functional life. Its opacity means only thin foils can be transparent. LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, and various molded laboratory equipment. Its most common use is in plastic bags.

Kritilen® I R770 contains the same Infra-Red absorber as KRITILEN® IR700, but at a higher concentration. Its proposed addition rate in LDPE or LDPE/EVA films is at the range of 2%-7%, depending on the film thickness, VA content of the film and required "thermic effect".

B2190 is a film grade black PE masterbatch. PE carrier black masterbatch, it contains premium carbon black , with high opacity, blackness & dispersion.

KRITILEN® IR550 contains an effective inorganic Infra-Red absorber. Recommended addition in LDPE films is 5%-15% depending on film thickness and required "thermic effect". For LDPE/EVA co-extruded films, recommended addition is 2%-10% depending on film thickness, VA content of the film and required "thermic effect".

UV MB 01(SV 91A001UVA) U.V 770 is used for Specifically, LDPE Lamination on PP Raffia and it having advantage of Excellent light stabilizer at low cost.

Kritilen® HT 555 is a special IR-absorber that does not affect film clarity. For better results, it is recommended to combine it with EVA, at an addition of 3%-10%.