Products in Other Agricultural Films: Chemical Resistant

Neviprop 040 TL40 NERO is a Homopolymer polypropylene filled with 40% talc. its used in Automotive & Agricolture Consumer Goods

PBT unreinforced, highly impact modified

RUGOPA® M60 016 NC00 1000 is a PA6 50% glass fiber natural (Heat stb.+UV Protection) for injection applications.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

JOBABLEND® TB63 001 BK55 2060 7101 is a PC/ABS UNFILLED BLACK FLAME RETARDANT for injection applications.

Nevieco PA6 FF BK is a industrial grade.

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

SPINOPC® T30 200 NC00 is a PC UNFILLED NATURAL for injection applications.

MAGNAPBT® L60 007 NC00 1000 is a PBT %30 glass fiber natural heat aging for injection application.

Nevimid 6 MLD E300 NATURALE is toughened. Its used in Automotive & Agricolture Consumer Goods.

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

Nevimid 66 A SC NATURALE is toughened. Its used in Automotive & Agricolture Consumer Goods.

PBT + PCT, unreinforced, increased heat resistance, impact modified

KEBABLEND / WR 01/2105 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

PBT unreinforced, injection molding type, low viscosity

Nevimid 66 A G30 H NATURALE is heat stabilized. Its used in Automotive & Agricolture Consumer Goods.

MAGNAPBT® L60 002 NC00 1000 is a PBT %15 glass fiber natural heat aging for injection applications.

Nevimid 66 A G30 NERO is a Polyamide 66 reinforced with 30% glass fiber, black color. its used in Automotive & Agricolture Consumer Goods

Nevimid 66 A B30 NATURALE is a Polyamide 66 reinforced with 30% glass beads. its used in Automotive & Agricolture Consumer Goods

SPINOPC® T63 001 BK55 1000 is a PC UNFILLED NATURAL FLAME RETARDANT

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

RUGOPPA® P60 007 NC00 is a PPA %30 glass fiber natural (Heat Stb.) for injection application.

RUGOPPA® P60 027 NC00 is a PPA %45 glass fiber natural (Heat Stb.) for injection application.

Sekisui Plastics LIGHTLON NE made with antistatic technology. The technology stops dirt and dust from attracting to the surface.

ULTRACOMP® UC500 is a bearing grade blended fiber with bearing grade composite.

Nevimid 66 A B50 NATURALE is a Polyamide 66 reinforced with 50% glass beads. its used in Automotive & Agricolture Consumer Goods

POM copolymer unreinforced, medium viscosity

JOBABLEND® TB41 001 BK55 1000 7102 is a PC/ABS UNFILLED NATURAL (Heat Stb.) for injection applications.

Nevimid 66 A FC30 NATURALE is a Dissipative compound based on polyamide 66 filled with 30% carbon fiber. its used in Electric & Electronic Consumer Goods

Bifix PE 491-50 is a black master blue tone with high concentration of soot and mineral fillers. Intended for making thinner and thicker foils, as well as pipes. Possible application for the production of agrofoils of shorter shelf life.

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

SPINOPC® P16-061 is a PC %20 GLASS FIBER BLACK for injection applications.