Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Automotive & Transportation
Automotive
Cooling & Climate
Products in Cooling & Climate: Silicones
34 Products found in Cooling & Climate
Filters
Product Families
Suppliers
End Uses
Functions
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® LR 3092/65 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Gaskets
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Very Good Heat Resistance, Low Compression Set, Low VOC, Cost Effective, Heat Resistance, Heat Stabilized
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3092/65 A/B is a paste-like, two-component liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +210°C, and for a short time up to 300°C. Low compression sets can be achieved after post-curing.
Wacker Chemie AG
ELASTOSIL® R 416/70 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Turbocharger Hoses, Turbo Charger Hose, Tubes, Exhaust Duct Systems, Profiles, Hoses
Features:
Cost Effective, Non Stick, Dimensional Stability, Heat Stabilized, Good Green Strength, High Consistency
Tear Strength:
32.0 - 32.0 kN/m
ELASTOSIL® R 416/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.
Wacker Chemie AG
ELASTOSIL® R 760/70 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Turbocharger Hoses, Turbo Charger Hose, Hoses
Features:
Low Compression Set, Cost Effective, Non Stick, Heat Stabilized, Dimensional Stability, Good Green Strength, High Consistency
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® R 760/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.
Wacker Chemie AG
ELASTOSIL® R 863/65 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Caps, Closures, Hoses
Features:
Low Compression Set, Non Stick, Coolant Resistant, Heat Stabilized, Dimensional Stability, Good Green Strength, High Consistency
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® R 863/65 MH is a peroxide-curing silicone rubber known for its exceptional green strength, which greatly improves calendering and extrusion performance. When uncured, the extruded hoses made from this silicone rubber exhibit high dimensional stability and a non-sticky surface. ELASTOSIL® R 863/65 is specifically formulated as a high green-strength peroxide-curing silicone rubber. It is recommended to add heat stabilizers when operating at service temperatures exceeding 180 °C.
Wacker Chemie AG
ELASTOSIL® RT 728 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making, Gaskets
Features:
Low Compression Set, High Flexibility, Room Temperature Vulcanizing, Coolant Resistant, Fast Curing, Freeze Resistant, Good Adhesion
Tear Strength:
10.0 - 10.0 kN/m
ELASTOSIL® RT 728 A/B is a two-part paste-like silicone rubber that can be thermally cured. When vulcanized, it exhibits excellent resistance to coolants and has a low compression set. This product is commonly used in applications such as bonding and sealing, as well as in the production of cured-in-place gaskets (dry type). Its notable properties include strong adhesion on synthetic materials that are resistant to antifreeze-water mixtures, as well as a low compression set.
Wacker Chemie AG
ELASTOSIL® E303 Transluzent
Product Type:
Solventborne Sealant, 1K (1 component) Adhesive, Solventborne Coating
Features:
Free Flowing, Moisture Resistant, Low Viscosity, Outdoor Durability, Flexible
Application Area:
Automotive Radiator
Application Method:
Brush, Dip Coating, Spray
Chemical Family:
Silicones
ELASTOSIL® E303 Transluzent is an acetoxy-cure, free-flowable, solvent-based RTV-1 silicone dispersion. It cures at room temperature or at elevated temperatures by reacting with air humidity to form a flexible silicone coating. A typical application is the selective coating of heat exchangers (automotive radiators).
Wacker Chemie AG
ELASTOSIL® LR 3074/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Radiator, Automobile Door Seals
Features:
Cost Effective, Good Electrical Properties, Coolant Resistant, Fast Curing, Good Mechanical Properties, Pigmentable
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® LR 3074/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3074 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.
Momentive Performance Materials
Silopren™ Matrix 80
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Hoses, Belts & Belt Repair
Features:
Good Colorability, Good Processability, Fast Curing, Fast Molding Cycle, Low Temperature Flexibility, Good Stability, Good Thermal Stability, UV Resistant, Good Mold Release, Ozone Resistant
Silopren™ Matrix 70 and 80 two-component liquid silicone rubber for injection molding processes contain polymeric fibers, which help reinforce molded articles while maintaining LSR's excellent processing properties.Key Features and Typical BenefitsVulcanizates consisting of Silopren™ Matrix LSR are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Good rubber-like properties High modulus High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ Matrix LSR is an excellent candidate to consider for use in the following elastomeric articles: Membranes Pressure hoses Exhaust hangers Watchbands Belts.
Momentive Performance Materials
LIM™ 6030
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
Tear Strength:
31.0 - 31.0 kN/m
LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.
MICAM
MICAM S5
Functions:
Laminate
Reinforcement Material:
Glass Fibers
MICAM’s S5 Grade is a silicone resin laminate, based on a fine weave glasscloth, with excellent machining characteristics. Excellent electrical, very low loss angle and excellent thermal properties.
Momentive Performance Materials
LIM™ 6040
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
Tear Strength:
39.0 - 39.0 kN/m
LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.
Momentive Performance Materials
LIM™ 6040-D2
Applications:
Tubing & Fluids Handling, Surgical Instruments & Trays, Medical Devices & Assemblies
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Tubing, Surgical Instruments, Medical Devices
LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.
Momentive Performance Materials
LIM™ 6045
Tear Strength:
39.0 - 39.0 kN/m
LIM™ 6045 by Momentive Performance Materials is comprised of Liquid Silicone Rubber. It is commonly used as Molding Resin for a variety of applications. It is available in Liquid form.
Momentive Performance Materials
Silopren™ Matrix 70
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Hoses, Belts & Belt Repair
Features:
Good Colorability, Good Processability, Fast Curing, Fast Molding Cycle, Low Temperature Flexibility, Good Stability, Good Thermal Stability, UV Resistant, Good Mold Release, Ozone Resistant
Silopren™ Matrix 70 and 80 two-component liquid silicone rubber for injection molding processes contain polymeric fibers, which help reinforce molded articles while maintaining LSR's excellent processing properties.Key Features and Typical BenefitsVulcanizates consisting of Silopren™ Matrix LSR are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Good rubber-like properties High modulus High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ Matrix LSR is an excellent candidate to consider for use in the following elastomeric articles: Membranes Pressure hoses Exhaust hangers Watchbands Belts.
Momentive Performance Materials
Tufel™ III 92506
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Equipment & Parts
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Surgical Instruments, Medical Devices, Valve Parts
Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.
Momentive Performance Materials
Tufel™ II 94706
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubing
Tufel™ II 94706 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.
Stoner
Stoner A324 Rapid Release
Functions:
Mold Release Agent, Release Agent
Chemical Family:
Silicones
Compatible Polymers & Resins:
Silicones
Processing Methods:
3D Printing, Stereolithography
End Uses:
Gaskets, Valve Parts, Prototyping, O Rings, Toys, Cookware
Stoner, Inc. A324 Rapid Release is specially formulated to release molded silicone rubber, thermoset plastics, rubber, and similar materials.
MICAM
MICAM S7
Functions:
Laminate
Reinforcement Material:
Glass Fibers
MICAM’s S7 Grade is a silicone laminate, which is suitable for high frequency applications.
MICAM
MICAM TS7
Polymer Name:
Silicone Elastomer
Functions:
Prepreg
Reinforcement Material:
Glass Fibers
TS7 is a B-staged silicone prepreg based on a medium weave glass fabric suitable for the manufacture of tubes and laminates.
Von Roll Isola
Samicanite-® S T
Applications:
Textile Manufacturing, Other Textile Applications, Other Industrial Applications
Product Families:
Parts & Shapes
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubes, Coiled Tubes, Bobbins
Samicanite-® S T is composed of silicone resin and mica paper reinforement.
Momentive Performance Materials
Tufel™ II 94606
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubing
Tufel™ II 94606 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.
Momentive Performance Materials
Tufel™ II 94506
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubing
Tufel™ II 94506 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.
Momentive Performance Materials
LIM™ 6050-D2
Applications:
Tubing & Fluids Handling, Surgical Instruments & Trays, Medical Devices & Assemblies
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Tubing, Surgical Instruments, Medical Devices
LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.
Allied Metrics
Allied Metrics SILICONE O-RINGS
Applications:
Semiconductor Manufacturing, Appliances & Electronics, Marine
Product Families:
Parts, Shapes & Films
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Marine Applications, Aerospace Applications
Allied Metrics Silicone O-Rings are the superior choice for static applications where resistance to temperature extremes or harsh environmental conditions are required. Though they serve a vast array of applications, silicone O-rings are not suitable for dynamic applications due to their poor tear and abrasion resistance.
MICAM
MICAM TS5
Polymer Name:
Silicone Elastomer
Functions:
Prepreg
Reinforcement Material:
Glass Fibers
TS5 is a B-staged silicone prepreg based on a fine weave glass fabric suitable for the manufacture of tubes and laminates
Momentive Performance Materials
Tufel™ II 94206
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubing
Tufel™ II 94206 and 93306 are 20 and 30 Silicone Rubber Compounds durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.
Momentive Performance Materials
Silplus™ 60 EX
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubing
Silplus™ 60 EX is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in extrusion, press-molding injection and calendaring. Silplus™ 60 EX heat cured silicone may be considered for use in a wide variety of high quality applications such as high durometer tubes and profiles.Key Features and Benefits excellent extruding processability good mechanical properties high green strength easily blendable versatile Potential ApplicationsBecause of its outstanding properties, Silplus™ 60 EX heat cured silicone is an excellent candidate to consider for use in most types of extrusion and calendaring applications.
Momentive Performance Materials
LIM™ 6071
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.
Momentive Performance Materials
LIM™ 6061
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
LIM™ 6061 is the next generation in 60-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounds, and valve parts can be made readily from LIM6061 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications sports goggles and masks health care profiles camera parts coating metal rolls.
GUMMIWERK KRAIBURG
KRAIBURG VMQ
Applications:
Other Industrial Applications, Consumer Electronics, Cooling & Climate
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Appliances, Lawn Equipment, Garden Equipment
KRAIBURG VMQ is silicone rubber used in applications such as resistant to mineral oils (not aromatic), diluted acids and alkaline solutions, alcohols and ketones.
Momentive Performance Materials
LIM™ 6050
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Medical/Healthcare Applications, Valves, Tubing, Valve Parts, Medical Devices, Camera Applications, Surgical Instruments, Sporting Goods, Connectors
Features:
Good Mold Release, High Clarity, High Tensile Strength, Fast Curing, Good Tear Strength
Tear Strength:
43.0 - 43.0 kN/m
LIM™ 6050 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6050 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150C (302F) to 205C (400F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.
Momentive Performance Materials
Tufel™ II 94406
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubing
Tufel™ II 94406 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.
Momentive Performance Materials
Tufel™ III 92656
Applications:
Surgical Instruments & Trays, Medical Devices & Assemblies, Equipment & Parts
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Surgical Instruments, Medical Devices, Valve Parts
Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.
Momentive Performance Materials
Tufel™ II 94306
Applications:
Cooling & Climate, Appliances & Electronics, Fuel Systems
Product Families:
Silicone Elastomers, Specialty Elastomers
Chemical Family:
Silicones
Polymer Name:
Silicone Elastomer
End Uses:
Tubing
Tufel™ II Silicone Rubber Compounds 94206 and 93306 are 20 and 30 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.