Products in Cooling & Climate: Automotive Exterior Parts

Noblen® SNCT0507 Natural is a polypropylene impact TPO. It is used in off-road vehicle exterior parts. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Akulon® Ultraflow K-FHGM24 is a high-performance polyamide 6 and polyamide 66 material trusted globally for diverse applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an exceptional blend of design simplicity and processing ease, coupled with outstanding mechanical properties across a wide temperature range and diverse conditions. For extrusion, it establishes industry-leading standards, offering impressive strength, resilience, and ease of processing. Injection molding is the preferred technology, and notable features encompass 10% glass reinforcement, 20% mineral reinforcement, heat stabilization, and high flow characteristics.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALTECH® ECO PA66 2020/116 GF20 IM is an impact-modified, recycled material containing polyamide 66 with 20% glass fibers. It is suitable for a variety of applications including oil pump parts, housing, automotive trim unpainted, cooling systems, filter systems, and transport systems. To ensure optimal results, pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. When processing with injection molding, melt temperature should range between 280-300°C, and mold temperature should range between 80-120°C. This material is suitable for automotive, building and construction, and various other market segments.

MOCOM Compounds ALTECH® PA6 B 2025/309 GF25 is a polyamide 6 base polymer with 25% glass fiber filler/additive system. It is suitable for injection molding, with melt temperatures of 270-290°C and mold temperatures of 80-100°C, and has special features such as easy release (demolding), easy flow, processing stabilization and heat stabilization. It is suitable for the automotive, machinery, building and construction market segments, and can be used for injection molded parts, exterior parts, housings, functional components and air ducts.

MOCOM Compounds ALTECH® PP-H A 4920/109 TV20 is a polypropylene homopolymer with 20% talcum, which is heat stabilized, highly stiff, UL-listed, and processing stabilized for easy demolding. It is used in the electrical and electronic, automotive markets for applications such as electrical components, interior decoration/finishing, exterior parts, housings, functional components, automotive powertrain parts, radiator grilles, and fans.

MOCOM Compounds ALTECH® ECO PP H 4920/570 MR 20 is a polypropylene homopolymer containing 20% talcum, antioxidant, and long-term heat-stabilized processing stabilizer with recycled material. It requires pre-drying conditions in a dry air (dessicant) dryer at 80-120°C for 2-3 hours, or in an air circulating dryer at 80-120°C for 2-4 hours. For injection molding, its melt temperature should be between 200-240°C, and its mold temperature should be between 20-70°C. Typical applications include air duct, housing, and automotive trim unpainted, among various others.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALTECH® ECO PA66 2030/116.01 GF30 is an impact-modified and processing-stabilized polyamide 66 resin with 30% glass fibers and recycled material. It is suitable for applications such as oil pump parts, housings, and automotive trim unpainted, cooling systems, chassis, steering, and impact protection/shock absorbers. For injection molding, the melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. It is suitable for the automotive market segment and provides excellent mechanical properties.

MOCOM Compounds ALTECH® PP-H A 2020/750 GF20 is a Polypropylene Homopolymer filled with 20% glass fibers and is processing stabilized, heat stabilized, and chemically coupled. It is suitable for applications in electrical and electronic, building and construction, and automotive markets such as housings, fixing elements, functional components, radiator grilles, electrical components, exterior parts, and cooling systems. Pre-drying conditions should be done in a dry air (dessiccant) dryer or an air circulating dryer at 80-120°C for 2-4 hours. Processing injection molding should be done with a melt temperature of 200-250°C and mold temperature of 20-70°C.

MOCOM Compounds ALTECH® ECO PA66 2030/116 GF30 is a polyamide 66 base polymer with 30% glass fibers, impact modified and containing recycled material, specifically designed for automotive and other market segments. It is suitable for applications such as cooling systems, chassis, steering, oil pump parts, housings, automotive trim unpainted, impact protection/shock absorbers, and more. During processing, injection molding should be done with a melt temperature of 280-300°C and a mold temperature of 80-120°C.

MOCOM Compounds ALTECH® PP-H A 2020/750 GF20 CP is a base polymer of Polypropylene Homopolymer with 20% glass fibers and filler/additive system. It is processing stabilized, high stiffness, chemically coupled, and heat stabilized. It has a melt temperature of 200-250°C and mold temperature of 20-70°C and is suitable for the electrical and electronic, building and construction, and automotive market segments. Typical applications include housings, fixing elements, functional components, and radiator grilles.

MOCOM Compounds ALTECH® PA6 A 4030/109 MR30 is a Polyamide 6 grade containing a 30% mineral filler/additive system and heat stabilized for improved flow characteristics during injection molding. It is suitable for a wide range of automotive, machinery, electrical and electronic, furniture, building and construction, sport and leisure, packaging, medical/personal care, lighting, and information technology applications. Typical applications include racking/shelving, airbag components, batteries, fixing elements, power drills, clips, roof boxes and more. Processing conditions should include a melt temperature of 270-290°C and a mold temperature of 80-100°C for optimal performance, while pre-drying conditions should include 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content.

MOCOM Compounds ALTECH® PA6 A 2050/560 GF50 is a polyamide 6 reinforced with 50% glass fibers. It is a high heat stabilized, easy release (demolding), easy flow, injection molding grade suitable for automotive, electrical and electronic applications, such as engine and drive systems, exterior parts, electrical components, interior decoration/finishing, and injection molded parts. Typical applications include functional components, different automotive powertrain parts, and air ducts.

MOCOM Compounds ALTECH® PA6 A 3230/100 GF10 GB20 is a heat-stabilized, easy-flow, easy-release (demolding) and fast-solidifying polyamide 6-based compound with a filler/additive system of 20% glass beads and 10% glass fibers. It is suitable for exterior parts and injection-molded parts and is commonly used in automotive, building, and construction applications for functional components and housings.

MOCOM Compounds ALTECH® PA6 A 2330/500 is a heat stabilized, improved surface appearance and easy release polyamide 6 with a 20% glass fiber and 10% glass bead filler/additive system. It is suitable for many market segments, such as automotive, machinery, building and construction, and can be used for injection molded parts, electrical components, and exterior parts. Typical applications include air ducts, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 2035/109 GF35 is a polyamide 6 based polymer with a 35% glass fiber filler/additive system that is heat stabilized, easy to release (demold) and processing stabilized. Common market segments utilizing this material include automotive, electrical and electronic, and building and construction. Typical applications include functional components, automotive powertrain parts, fans, housings, and electrical components.

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Starflam M10004A is an Unfilled Halogen Free Flame Retardant PP Injection Molding Resin

Techno MUH E7301 is super high heat resistant indicator used in automoble interior parts like cup holder, ventlator console parts.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Starpylen MFK42AS is a Mineral Filled, Glass Fiber Reinforced, Polypropylene Injection Molding Resin

Paychlor S-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Rubaloy RA - 7047 is a unique blend of Nitrile Rubber with PVC, specially made to offer very high ozone, weather, oil, and abrasion resistance in the products. It offers good tensile strength and elongation along with extremely low gas permeability. It is suitable to produce molded and extruded products.

Neoplast™ 155 FT SW B are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Kiamid 6 S2C-13 NT is a unamplified Polyamide 6.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Starpylen HT 25 MC is a Mineral Filled Polypropylene Injection Molding Resin

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Starflam M10009A is an Unfilled Flame Retardant Polypropylene (Homo) Injection Molding Resin

Techno MUH LG5534 is heat resistant indicator used in automobile interior parts like ventilators.

Starpylen M1000 is an Unfilled Polypropylene, Injection Molding Resin

Nanjing Hongrui Plastic Products T304is used in textile equipment, engine blower, auto parts, electronic components. It is glass fiber reinforced type..

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Neoplast™ 155 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.